API 5CT Grade J55 Casing Tubing

  • Home
  • Products
  • API 5CT Grade J55 Casing Tubing
API 5CT Grade J55 Casing Tubing

API 5CT Grade J55 Casing Tubing

Welded 5CT J55 Tubing

Welded 5CT J55 Tubing

API 5CT J55 Casing Pipes

API 5CT J55 Casing Pipes

API 5CT J55 Casing Tubing manufacturer, check API 5CTQ J-55 Specification and Equivalent here


Check API 5CT J55 Tubing specifications, API 5CT J55 OCTG and Linepipe Composition and updated price online

API 5CT J55 Casing Tubing is used in oil and gas industries primarily. It is approved by the American Petroleum Institute standards. The API 5CTQ J-55 comes in various dimensions. The outer diameter ranges from 4 ½ inches to 20 inches. There are short round threaded and long round threaded pipes available. The API 5CT J55 Tubing can also be buttress threaded. Depending on the use case, the different types are chosen. The wall thickness of the pipe ranges from 5.21mm to 16.13mm. The API 5CT J55 OCTG and Linepipe can vary in lengths from R1 to R3 ranging from 4.88m to 14.63m. The commonly used models are 2 3/8 inches, 2 7/8 inches and 4 ½ inches. The API 5CT Grade J55 Casing Pipe has drifting, threading, heat treating, external upset, hydrostatic tested and coated. The pipes are used in different applications with different material composition. There are other grades in 5CT specification but the API 5CT J55 Oilfield Casing Pipe has 517MPa minimum yield strength and 552MPa minimum tensile strength. The casing and cladding pipes are used to prevent the pipelines from corrosive agents. The material is mostly carbon steel with manganese, molybdenum, chromium, nickel, copper, phosphorus and sulfur. The J55 grade only has phosphorus and sulfur where other grades can have a combination of all these elements. The API 5CT J55 Smls Steel Pipes are used in oil and gas, petroleum, food production, construction and in electric applications as well.

API J55 Pipe Specifications
API Std API-5CT
Length in meter 6.10 To 7.32 Meter / 8.53 To 9.75 Meter / 11.58 To 12.8 Meter)
Sizes in inch 2 To 3/8 Inch, 2 To 7/8 Inch, 3 To 1/2 Inch, 4 Inch, 4 To 1/2 Inch
Steel Grade J55, N80-Q, K55, L80, N80-1, P110
Pipe Marking All Pipe are marked as follows: Supplier or Manufacturer’s Name, Standard, Grade, OD, Thickness, Length, Heat Number
Thread LTC, STC, BTC
Supplier & Distributors Located in Mumbai, Courbevoie, Kuwait, Noida, Ranchi, Ludhiana, Ahvaz, Gurgaon, Khobar, Riyadh, New Delhi, Montreal, Gujarat, Chennai, Surat, Janeiro, Abu Dhabi, Jamshedpur, Gimhae si, Vadodara, Hyderabad, Coimbatore, Manama, Tehran, Thiruvananthapuram, Rajkot, London, Karachi, Sydney, Bogota, Kanpur, Baroda, Istanbul, Ludhiana, India, Howrah, Melbourne, Mexico, Lagos, Ahmedabad, Muscat, Bengaluru, Santiago, Bangalore, Nagpur, Indore, Ernakulam, Pimpri Chinchwad, Ankara, Perth, Tau, Calgary, Kolkata, Port of Spain, Caracas, Dammam
Different Types of API 5CT J55 Casing Tubing
API 5CT J55 Casing Steel Pipe

API 5CT J55 Casing Steel Pipe

API 5CT J55 Casing And Tubing

API 5CT J55 Casing And Tubing

API 5CT J55 Seamless Oil Casing Pipe

API 5CT J55 Seamless Oil Casing Pipe

API 5CT J55 Seamless Casing Steel Pipe

API 5CT J55 Seamless Casing Steel Pipe

API 5CT J55 Grade 7 Inch Btc Thread Seamless Steel Tubing

API 5CT J55 Grade 7 Inch Btc Thread Seamless Steel Tubing

API 5CT Gr J55 Steel Pipe Casing

API 5CT Gr J55 Steel Pipe Casing

Your need for API 5CT Grade J55 Casing Pipe of standard dimension and diameter ends here, We provide the best quality range of API 5CT J55 Oilfield Casing Pipes

API 5CTQ J-55 Dimension
Size in Inch (WT) Weight in MM OD in Inch WT In MM Surface Finish
Element
Inch MM Inch MM J 55 K 55 L 80 N 80 C 90 T 95 P 110
5 11.50 5 127 0.220 5.59 PS
13 0.253 6.43 pslb
18 0.362 9.19
15 0.296 7.52 pslb
21.40 0.437 11.10
24.10 0.500 12.70      
23.20 0.478 12.14      
4 1/2 9.50 4.500 114.3 0.205 5.21 PS
10.50 0.224 5.69 PSB
13.50 0.290 7.37
11.60 0.250 6.35 pslb
15.10 0.337 9.56
5 1/2 14 5.500 139.7 0.244 6.20 PS
17 0.304 7.72 pslb
15.50 0.275 6.98 pslb
23 0.415 10.54
20 0.361 9.17
7 17 7 177.80 0.231 5.87
23 0.317 8.05 pslb
20 0.272 6.91 PS
26 0.362 9.19 pslb
32 0.453 11.51
29 0.408 10.36
38 0.540 13.72
35 0.498 12.65
6 5/8 20 6.625 168.28 0.288 7.32 pslb
24 0.352 8.94 pslb
32 0.475 12.06
28 0.417 10.59
7 5/8 24 7.625 193.68 0.300 7.62
29.70 0.375 9.52
26.40 0.328 8.33 pslb
33.70 0.430 10.92
47.10 0.625 15.88
42.80 0.562 14.27
39 0.500 12.70
45.30 0.595 15.11
9 5/8 32.30 9.625 244.48 0.312 7.92
40 0.395 10.03 pslb
36 0.352 8.94 pslb
43.50 0.435 11.05
53.50 0.545 13.84
47 0.472 11.99
58.40 0.595 15.11
8 5/8 24 8.625 219.08 0.264 6.71 PS
32 0.352 8.94 pslb
28 0.304 7.72
49 0.557 14.15
36 0.400 10.16 pslb
44 0.500 12.70
40 0.450 11.43
10 3/4 32.75 10.75 273.05 0.279 7.09
65.70 0.595 15.11 PSB PSB
40.50 0.350 8.89 PSB
51 0.450 11.43 PSB PSB PSB PSBE PSB
15.50 0.400 10.16 PSB
60.70 0.545 13.84 PSBE PSB
55.50 0.495 12.57 PSB PSB PSBE PSB
16 65 16 406.40 0.375 9.53
84 0.495 12.57 PSB
75 0.438 11.13 PSB
18 5/8 87.50 18.625 473.08 0.435 11.05 PSB
109 0.656 16.66 P P P P
13 3/8 48 13.375 339.73 0.330 8.38
61 0.430 10.92 PSB
54.50 0.380 9.65 PSB
72 0.514 13.06 PSB PSB PSB PSB
68 0.480 12.19 PSB PSB PSB PSB PSB
20 94 20 508 0.438 11.13 pslb
133 0.635 16.13 pslb
106.50 0.500 12.70 pslb
If you searching a supplier from these places check our suppliers below
api 5ct j55 oil casing pipe Philippines, Chile, Iran, Canada
API 5CT J55 Oil Tubing United Arab Emirates (UAE), Norway, Romania, Europe
API 5CT Qualified J55 OCTG Casing Pipe Used For Oil And Water Wall Russia, Malaysia, Netherlands, Sweden
API 5CT J55 SEAMLESS OIL CASING PIPE Egypt, Los Alamos -Mexico, Mexico, Malaysia
J55 API Oilfield Casing JIS Pipe Malaysia, NY 12203 (USA), United Kingdom -UK, Singapore
Gr J55 OCTG Steel plumbing pipe UK, Philippines, Poland, Dammam -KSA
API 5CT J55 API 5ct Oil Casing Polished Tube Singapore, Europe, Malaysia, Qatar
API 5CT J55 Casing pipes and tubes Thailand, Czechia, Malaysia, Japan
API 5CT J55 Oilfield Casing Pitot Tube China, Bangladesh, Colombia, Malaysia
Stainless Steel J55 xxs pipe Taiwan, Kuwait, Philippines, South Africa
API 5CT Grade J55 Casing Threaded Tube South Korea, Singapore, Malaysia, Bahrain
Seamless API 5CT Petroleum Casing Round Tube Indonesia, Belgium, UK, Philippines
API 5CT Oil Casing Thin Wall Tube Thailand, Oman, France, Hong Kong
J55 API-5CT Casing U Shaped Tube Malaysia, Germany, Turkey
API 5CT J55 Casing Spiral Tube Malaysia, Dubai, Finland, USA
Grade J55 Oil Well Drilling Casing Welded Tube Brazil, UK, Saudi Arabia (KSA), Spain
API 5CT Gr. J55 Structural Tube Singapore, Europe, South Africa, UAE
J55 Api Steel Casing Seamless Round Tubing Nigeria, Ellington -United States, Australia, Canada
API-5CT J55 Casing Welded Tubing Malaysia, Singapore, UAE, Italy
get API 5CT J55 Smls Steel Pipes Chemical Composition and J55 Casing Wall Thickness
API 5ct J55 Chemical Composition
Element Type Carbon Manganese Molybdenum Chromium Nickel maximum Copper maximum Phosphorous maximum Sulfur maximum Silicon maximum
Minimum maximum Minimum maximum Minimum maximum Minimum maximum
J 55 - - - - - - - - - - - 3/100 3/100 -
H 40 - - - - - - - - - - - 3/100 3/100 -
K 55 - - - - - - - - - - - 3/100 3/100 -
N 80 Q - - - - - - - - - - 3/100 3/100 -
N 80 1 - - - - - - - - - - 3/100 3/100 -
R 95 - - 45% c - 0.019 - - - - - - 3/100 3/100 45%
L 80 1 - 0.0043 a - 0.019 - - - - 0.0025 35% 3/100 3/100 45%
M 65 - - - - - - - - - - - 3/100 3/100 -
L 80 9 Cr - 0.0015 0.003 0.006 0.009 11/10 7 9 1/2 0.0025 0.0002 0.0001 0.1
C 90 1 - 35% - 0.012 0.0025 b 0.756 - 1/2 0.0099 - 0.0002 0.01 -
L 80 13 Cr 0.0015 0.0022 0.0025 1 - - 12 14 1/2 0.0025 0.0002 0.01 1
T 95 1 - 35% - 0.012 0.0025 d 0.756 0.004 1/2 0.0099 - 0.0002 0.01 -
P 110 e - - - - - - - - - - 0.030 e 0.030 e -
C 110 - - 35% - 0.012 0.0025 1 0.004 1/2 0.0099 - 0.0002 0.005 -
Q 125 1 - 35% 0.0135 - 0.756 - 1/2 0.0099 - 0.0002 0.01 -
Mechanical Properties of API 5CT J55 Tubing
Standard Type Tensile Strength Hardness Yield Strength
API 5CT J 55 ≥517 ---- 379 ~ 552
L 80 ≥655 ≤241HB 552 to 655
K 55 ≥517 --- ≥655
P 110 ≥862 ---- 758 to 965
N 80 ≥689 --- 552 to 758
Hardness Requirements of API 5CT J55 OCTG and Linepipe
Grade Type Elongation Yield strength Tensile strength minimum Hardness Maximum wall thickness in Mm hardness
Minimum maximum   Hardness Rockwell C Brinell Hardness
M 65 - 1/2 548 687 687 23 337 - -
Q 125 1 13/20 862 1034 931 b - 12.70 to 19.05 4, 3, 5, 6
L 80 1 1/2 548 687 687 23 337 - -
T 95 1 1/2 655 758 724 26 332 12.70 to 25.40 5, 3, 4, 6
L 80 9 Cr 1/2 552 655 655 23 241 - -
C 110 - 7/10 758 828 793 30 286 12.70 to 25.40 4, 3, 5, 6
N 80 Q 1/2 552 758 689 - - - -
C 90 1 1/2 621 724 689 25.4 255 12.70 to 25.40 4, 3, 5, 6
L 80 13 Cr 1/2 552 655 655 23 241 - -
P 110 - 3/5 639 923 826 - - - -
H 40 - 1/2 276 552 414 - - - -
K 55 - 1/2 379 552 655 - - - -
J 55 - 1/2 379 552 517 - - - -
R 95 - 1/2 655 758 724 - - - -
N 80 1 1/2 552 758 689 - - - -
API 5CT Grade J55 Casing Pipe Color Code
Name P 110 K 55 J 55 N 80 1 N 80 Q L 80 1
Coupling white coupling green coupling green coupling/ white band red coupling red coupling/ green band red coupling/ brown band
Casing white band Two bright green bands bright green band Bright red band Bright red band/ green band red band/ brown band
API 5CT J55 Oilfield Casing Pipe Size Chart
1/8 Inch IPS(.405 Inch Outer Diameter) 3.5 Inch IPS( 4 Inch Outer Diameter)
1-1/2 Inch IPS(1.900 Inch Outer Diameter) 14 Inch IPS(14.000 Inch Outer Diameter)
Schedule 10, 80, 40 Schedule XXH, 80, 40, 160, 10
3/8 Inch IPS(.675 Inch Outer Diameter) 5 Inch IPS( 5.563 Inch Outer Diameter)
Schedule 40, 80 Schedule 10, 80, 40, 160, XXH
1/4 Inch IPS(.540 Inch Outer Diameter) 4 Inch IPS(4.500 Inch Outer Diameter)
Schedule 40, 10, 160, 80, XXH Schedule-40 (.375)
Schedule 80, 40, 10 Schedule 160, 10, 80, 40, XXH
0.5 Inch IPS(.840 Inch Outer Diameter) 6 Inch IPS(6.625 Inch Outer Diameter)
Schedule 5, 10, 40, 80, 160, XXH Schedule 5, 10, 40, 80, 120, 160, XXH
3/4 Inch IPS(1.050 Inch Outer Diameter) 8 Inch IPS(8.625 Inch Outer Diameter)
Schedule XXH, 80, 40, 160, 10 Schedule 80, 40, 5, XXH, 120, 10, 160
1 Inch IPS:(1.315 inch Outer Diameter) 10 Inch IPS(10.750 Inch Outer Diameter)
Schedule 80, 40, 5, XXH, 120, 10, 160/td> Schedule 80, 20, 10, 80 (.500), TRUE 80(.500)
2 Inch IPS(2.375 Inch Outer Diameter) 16 Inch IPS(16.000 Inch Outer Diameter)
1-1/4 Inch IPS(1.660 Inch Outer Diameter) 12 Inch IPS(12.750 Inch Outer Diameter)
Schedule XXH, 10, 80, 160, 40 Schedule10 (.188), Schedule40 (.375)
2 1/2 Inch IPS(2.875 Inch Outer Diameter) 18 Inch IPS (18.000 Inch Outer Diameter)
Schedule XXH, 10, 80, 160, 40, Schedule 40, 20, 10(.375), TRUE40(.406), Schedule80(.500)
Schedule 40, 160, 80, XXH, 10, Schedule10(.188), Schedule40(.375)
3 Inch IPS( 3.500 Inch Outer Diameter) Schedule 160, 10, 80, 5, XXH, 40
Pioneer Supplier Of Welded 5CT J55 Tubing and j55 pipe at best price
API 5CT J55 Casing Tube Sizes
Wall Thickness Outer Diameter Sizes in Inch
.120 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 2, 2 1/4, 2 1/2, 3
.250 3
.010 1/16, 1/8, 3/16
.020 1/16, 1/8, 3/16, 1/4, 5/16, 3/8
.083 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 1 7/8, 2, 2 1/2,3
.016 1/8, 3/16
.028 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 3/4, 1, 1 1/2, 2
.035 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 2, 2 1/4
.134 1
.012 1/8
.049 1 5/8, 5/8, 3/16, 2, 16, 1/2, 1 1/4, 1 1/2, 5/16, 1 1/8, 1, 3/8, 3/4, 7/8, 1/4, 2 1/4
.095 1/2, 5/8, 1, 1 1/4, 1 1/2, 2
.065 2 1/2, 1/4, 1 1/2, 5/16, 3/8, 7/8, 1/2, 16, 5/8, 3/4, 1, 1 1/4, 1 5/8, 1 3/4, 2, 3
.109 1 1/4, 1/2, 3/4, 1, 1 1/2, 2
.125 1 1/2, 3/4, 1, 1 1/4, 2, 3, 3 1/4
.375 3 1/2
Stockist of API 5CT J55 Casing following manufacturers
Indian Seamless Metal Tubes Limited

Indian Seamless Metal Tubes Limited

Jindal Saw Ltd

Jindal Saw Ltd

Maharastra Seamless Limited

Maharastra Seamless Limited

Wuxi

Wuxi

Bao Steel

Bao Steel

United Seamless Limited

United Seamless Limited

Valourec & Mannesman -v & m

Valourec & Mannesman -v & m

Tenaris

Tenaris

Yangzhou Lontrin Steel Tube

Yangzhou Lontrin Steel Tube

Sumitomo Metals

Sumitomo Metals