API 5CT T95 Casing Pipe

  • Home
  • Products
  • API 5CT T95 Casing Pipe
API 5CT T95 Casing Pipe

API 5CT T95 Casing Pipe

API 5CT T95 Seamless Pipe

API 5CT T95 Seamless Pipe

API 5CT Grade T95 Welded Tubing

API 5CT Grade T95 Welded Tubing

API 5CT T95 Casing Tubing & Gr. T95 Oilfield Casing Pipes supplier


ISO certified API 5CT Gr. T95 Casing Pipes, T95 Seamless and welded Pipe supplier in India

API 5CT T95 Casing Tubing is a high pressure capable pipe that is used in transporting the oil and gas fluids from the lower layer to the surface. The Gr. T95 Oilfield Casing Pipes are used in oil rigs mainly but the applications vary from construction to food production. The pipes are stronger, harder and are corrosion resistant. The API 5CT T95 Oil Well Drilling And Gas Casing Pipes are made up of carbon steel material with manganese, phosphorus, sulfur, silicon, carbon and sometimes chromium and nickel in the composition. There are different grades such as the API 5CT Gr. T95 Casing Pipes in the API 5CT category. There are 4 different groups of these pipes. Each pipe has different set of mechanical and chemical properties. the API 5CT T95 Seamless Pipe belongs to the group 2 and has over 758MPa minimum yield strength and 724MPa minimum tensile strength. These strength values allow the pipe to withstand the high pressure created during the suction of liquids. The API 5CT T95 Welded Pipe is used in heavier applications with compatible connection types. The pipes have round threads bot short and long and buttress threads as well. The length of the pipes vary from 4 ½ inches to 20 inches in standard sizes. The Api T95 Seamless 5CT Petroleum Casing Pipe also has non upset threaded and external upset threaded ends. The heat treating, drifting, threading and couplings are available for these pipes. The API 5CT T95 Tubing is used to transport the fluid whereas the casing pipes are used to cover these pipes to minimize the corrosion. we are one of the supplier who provide cut to length pipes in all grade which saves your cost. Rexal tubes is a API 5CT T95 Casing Pipe supplier who stocks pipes in all surface finish

T95 Casing Specifications
API Std API-5CT T95
Sizes in inch 2 To 3/8 Inch, 2 To 7/8 Inch, 3 To 1/2 Inch, 4 Inch, 4 To 1/2 Inch
Length in meter 6.10 To 7.32 Meter / 8.53 To 9.75 Meter / 11.58 To 12.8 Meter)
Steel Grade J55, N80-Q, K55, L80, N80-1, P110
Thread LTC, STC, BTC
Pipe Marking All Pipe are marked as follows: Supplier or Manufacturer’s Name, Standard, Grade, OD, Thickness, Length, Heat Number
Supplier & Distributors Located in Dammam, Ahmedabad, Abu Dhabi, Istanbul, Caracas, Ludhiana, Surat, Melbourne, Port of Spain, Sydney, Gujarat, Nagpur, New Delhi, Vadodara, Howrah, Riyadh, Coimbatore, Chennai, Bogota, Rajkot, Perth, Thiruvananthapuram, Tehran, Pimpri Chinchwad, Ankara, Montreal, Tau, Jamshedpur, Indore, London, Lagos, Mexico, Courbevoie, India, Manama, Janeiro, Karachi, Hyderabad, Ranchi, Calgary, Kolkata, Noida, Kanpur, Baroda, Kuwait, Santiago, Bangalore, Gimhae si, Ahvaz, Mumbai, Ernakulam, Bengaluru, Muscat, Ludhiana, Khobar, Gurgaon
API 5CT T95 Casing Pipe Types
API 5CT T95 Casing Steel Pipe

API 5CT T95 Casing Steel Pipe

API 5CT T95 Casing And Tubing

API 5CT T95 Casing And Tubing

API 5CT T95 Grade 7 Inch Btc Thread Seamless Steel Deep Well Casing And Tubing

API 5CT T95 Grade 7 Inch Btc Thread Seamless Steel Deep Well Casing And Tubing

API 5CT Gr T95 Steel Pipe Casing

API 5CT Gr T95 Steel Pipe Casing

API 5CT T95 Seamless Oil Casing Pipe

API 5CT T95 Seamless Oil Casing Pipe

API 5CT T95 Seamless Casing Steel Pipe

API 5CT T95 Seamless Casing Steel Pipe

Gr. T95 Oilfield Casing Pipes Diameter
Element Grade Diameter
T95 CASING P110, J55, L80 4.5 Inch To 9.625 Inch / 10.75 Inch To 20 Inch
T95 P110, L80, JFBNAU, J55, 1% Chrome 2.375 inch To 3.5 inch

Check API 5CT Grade T95 Oil Well Drilling And Gas Casing Pipes size range

T95 Tubing Sizes
Outer Diameter in inch Wall Thickness PE in feet T and C in feet API Grades
2.375 .190 4.44 4.7 1.901 P110, L80, J-FBNAU, N80, J55
3.5 .254 8.81 9.3 2.867 P110, J-FBNAU, J55, N80, L80
2.875 .217 6.17 6.5 2.347 P110, L80, J-FBNAU, N80, J55
Check dimensions and specification of Api T95 Seamless 5CT Petroleum Casing Pipe
Grade T95 Oil Well Drilling Casing Tube Dimension
Outer Diameter 4.5 Inch to 20 Inch, (114.3-508 MM)
Standard Size 4.5 inch-20 inch, (114.3-508 MM)
Thread Casing Type Long round, Short round, Buttress
Refer API 5CT T95 Tubing Specification and T95 Casing Properties
API 5ct T95 Chemical Composition Chart
Silicon Vanadium Aluminium Carbon Manganese Chromium Nickel Copper Titanium Phosphorous Sulfur Molybdenum
Minimum - - - - - 0.250 - - - - - -
Maximum - - - 0.350 0.850 1.500 0.990 - - 0.020 0.010 1.200
API 5CT T95 Petroleum Casing Pipe Industries
Types of Pipes Spec. Grade STD
Petroleum Casing Pipe Millimetre Meter
Petroleum Tubing 27 To 115 3 To 16 6 To 12 M55. J55. K55.
N80. L80. P110.
API Specifiaction 5CT
Petroleum Pipe 127 To 508 5.3 To 17 6 To 12 M55. J55. K55.
N80. L80. P110.
API Specifiaction 5CT
Coupling 127 To 433 11.5 To 15 6 To 12 M55. J55. K55.
N80. L80. P110.
API Specifiaction 5CT
T95 Material Hardness
Grade Type Elongation Yield strength Tensile strength minimum Hardness Maximum wall thickness in Mm hardness
Minimum maximum   Hardness Rockwell C Brinell Hardness
M 65 - 1/2 548 687 687 23 337 - -
Q 125 1 13/20 862 1034 931 b - 12.70 to 19.05 4, 3, 5, 6
L 80 1 1/2 548 687 687 23 337 - -
T 95 1 1/2 655 758 724 26 332 12.70 to 25.40 5, 3, 4, 6
L 80 9 Cr 1/2 552 655 655 23 241 - -
C 110 - 7/10 758 828 793 30 286 12.70 to 25.40 4, 3, 5, 6
N 80 Q 1/2 552 758 689 - - - -
C 90 1 1/2 621 724 689 25.4 255 12.70 to 25.40 4, 3, 5, 6
L 80 13 Cr 1/2 552 655 655 23 241 - -
P 110 - 3/5 639 923 826 - - - -
H 40 - 1/2 276 552 414 - - - -
K 55 - 1/2 379 552 655 - - - -
J 55 - 1/2 379 552 517 - - - -
R 95 - 1/2 655 758 724 - - - -
N 80 1 1/2 552 758 689 - - - -
T95 Casing Properties
Hardness 255 maximum 25 maximum
Tensile Strength 105,000 minimum 724 minimum
Total Elongation Under Load - 0.500
Yield Strength 758 maximum 655 minimum
110,000 maximum 95,000 minimum
5CT T95 Casing Tubing Color Code
Element P 110 K 55 J 55 N 80 1 N 80 Q L 80 1
Coupling white coupling green coupling green coupling/ white band red coupling red coupling/ green band red coupling/ brown band
Casing white band Two bright green bands bright green band Bright red band Bright red band/ green band red band/ brown band
T95 Casing Specs
Elements Outer Diameter Nominal weight Wall Thickness processing types
MM kGS per Meter MM H40 J55 M65 L80 N801 C90d P110 Q125d
Inch Lbs/feet K55 C95 N80Q T95d
4, 1, 2 10.5 114.3 15.63 5.69 , SB SB
5 18 127 26.79 9.19 LB LB LB
4, 1, 2 13.5 114.3 20.09 7.37 LB LB
5 11.5 127 17.11 5.59 S S
4 1 2 11.6 114.3 17.26 6.35 SLB LB LB
5 15 127 22.32 7.52 SLB LB LB
4 1 2 15.1 114.3 22.47 8.56 LB LB
5 13 127 19.35 6.43 SLB SLB
4 1 2 9.5 114.3 14.14 5.21 S S S
5 23.2 127 34.53 12.14 LB LB
5 1 2 14 139.7 20.83 6.2 S S S
5 21.4 127 31.85 11.1 LB LB LB
5 1 2 17 139.7 25.3 7.72 SLB LB LB LB
6 5 8 24 168.28 35.72 8.94 SLB LB LB LB
5 1 2 15.5 139.7 23.07 6.98 SLB SLB
5 24.1 127 35.86 12.7 LB LB
5 1 2 20 139.7 29.76 9.17 LB LB
6 5 8 32 168.28 47.62 12.06 LB LB LB
5 1 2 23 139.7 34.23 10.54 LB L B LB LB
6 5 8 28 168.28 41.67 10.59 LB LB LB
7 23 177.8 34.23 8.05 SLB LB LB
6 5 8 20 168.28 29.76 7.32 S SLB SLB
7 17 177.8 25.3 5.87 S
7 5 8 26.4 193.68 39.29 8.33 SLB SLB LB LB
7 26 177.8 38.69 9.19 SLB LB LB LB
7 5 8 24 193.68 35.72 7.62 S
7 29 177.8 43.16 10.36 LB LB
7 5 8 33.7 193.68 50.15 10.92 LB LB
7 20 177.8 29.76 6.91 S S S
7 5 8 29.7 193.68 44.2 9.52 LB LB LB
7 32 177.8 47.62 11.51 LB LB LB
7 5 8 42.8 193.68 63.69 14.27 LB LB
7 35 177.8 52.09 12.65 LB LB
7 5 8 47.1 193.68 70.09 15.88 LB LB
8 5 8 24 219.08 35.72 6.71 S S
8 5 8 44 219.08 65.48 12.7 LB LB  
7 5 8 45.3 193.68 67.41 15.11 LB LB
8 5 8 28 219.08 41.67 7.72 S S
8 5 8 32 219.08 47.62 8.94 S SLB SLB
7 5 8 39 193.68 58.04 12.7 LB LB
8 5 8 36 219.08 53.57 10.16 SLB SLB LB LB
8 5 8 49 219.08 72.92 14.15 LB LB
8 5 8 40 219.08 59.53 11.43 LB LB
Codes Outer diameter Nominal weight Wall thickness processing type
MM kg/meter MM H40 J55 M65 L80 N80 C90d P110 Q125d
Inch Lbs/Feet K55 C95 1, Q T95d
9 5 8 32.3 244.48 48.07 7.92 S
9 5 8 40 244.48 59.53 10.03 SLB SLB LB
9 5 8 36 244.48 53.57 8.94 S SLB SLB
9 5 8 43.5 244.48 64.73 11.05 LB LB
9 5 8 53.5 244.48 79.62 13.84 LB LB
9 5 8 58.4 244.48 86.91 15.11 LB LB
9 5 8 47 244.48 69.94 11.99 LB LB LB
10 3 4 40.5 273.05 60.27 8.89 S SB SB
10 3 4 32.75 273.05 48.74 7.09 S
10 3 4 45.5 273.05 67.71 10.16 SB SB
10 3 4 60.7 273.05 90.33 13.84 SB SB
10 3 4 51 273.05 75.9 11.43 SB SB SB
10 3 4 65.7 273.05 97.77 15.11 SB SB
10 3 4 55.5 273.05 82.59 12.57 SB SB
11 3 4 42 298.45 62.5 8.46 S
11 3 4 54 298.45 80.36 11.05 SB SB
11 3 4 47 298.45 69.94 9.53 SB SB
11 3 4 60 298.45 89.29 12.42 SB SB SB
13 3 8 48 339.72 71.43 8.38 S
13 3 8 61 339.72 90.78 10.92 SB SB
13 3 8 72 339.72 107.15 13.06 SB SB SB
13 3 8 68 339.72 101.19 12.19 SB SB SB
13 3 8 54.5 339.72 81.1 9.65 SB SB
16 84 406.4 125.01 12.57 SB SB
16 65 406.4 96.73 9.53 S
18 5 8 87.5 473.08 130.21 11.05 S SB SB
16 75 406.4 111.61 11.13 SB SB
20 133 508 197.93 16.13 SLB
20 94 508 139.89 11.13 SL SLB SLB
20 106.5 508 158.49 12.7 SLB SLB
Welded 5CT T95 Tubing Thickness
Sizes Linear Mass Lbs per feet Outside-diameter WT End Finish
Gr
lnch MM lnch MM J55 L80 N801 / N80Q C90 T95 P110
2 7/8 6.40 6.50 2.875 73.03 0.217 5.51 PUN PNU PNU PNU PNU PNU
7.80 7.90 2.875 73.03 0.276 7.01 -- PNU PNU PNU PNU PNU
9.35 9.45 2.875 73.03 0.340 8.64 -- PU -- PU PU --
8.60 8.70 2.875 73.03 0.308 7.82 -- PNU PNU PNU PNU PNU
11.50 -- 2.875 73.03 0.440 11.18 -- P -- P P --
10.50 -- 2.875 73.03 0.392 9.96 -- P -- P P --
2 3/8 4.00 -- 2.375 60.33 0.167 4.24 PN PN PN PN PN --
5.80 5.95 2.375 60.33 0.254 6.45 -- PNU PNU PNU PNU PNU
4.60 4.70 2.375 60.33 0.190 4.83 PNU PNU PNU PNU PNU PNU
7.35 7.45 2.375 60.33 0.336 8.53 -- PU -- PU PU --
6.60 -- 2.375 60.33 0.295 7.49 -- P -- P P --
3 1/2 7.70 -- 3.500 88.90 0.216 5.49 PN PN PN PN PN --
10.20 -- 3.500 88.90 0.289 7.34 PN PN PN PN PN --
9.20 9.30 3.500 88.90 0.254 6.45 PNU PNU PNU PNU PNU PNU
14.30 -- 3.500 88.90 0.430 10.92 -- P -- P P --
12.70 12.95 3.500 88.90 0.375 9.52 -- PNU PNU PNU PNU PNU
17.00 -- 3.500 88.90 0.530 13.46 -- P -- P P --
15.50 -- 3.500 88.90 0.476 12.09 -- P -- P P --
4 1/2 12.60 12.75 4.500 114.30 0.271 6.88 PNU PNU PNU PNU PNU --
15.20 -- 4.500 114.30 0.337 8.56 -- P -- P P --
18.90 -- 4.500 114.30 0.43 10.92 -- P -- P P --
17.00 -- 4.500 114.30 0.380 9.65 -- P -- P P --
21.50 -- 4.500 114.30 0.500 12.70 -- P -- P P --
26.10 -- 4.500 114.30 0.630 16.00 -- P -- P P --
23.70 -- 4.500 114.30 0.560 14.22 -- P -- P P --
4 9.50 -- 4.000 101.60 0.226 5.74 PN PN PN PN PN PU
13.20 -- 4.000 101.60 0.33. 8.38 -- P -- P P --
10.70 11.00 4.000 101.60 0.262 6.65 PU PU PU PU PU PU
16.10 -- 4.000 101.60 0.415 10.54 -- P -- P P --
22.20 -- 4.000 101.60 0.610 15.49 -- P -- P P --
18.90 -- 4.000 101.60 0.500 12.70 -- P -- P P --

API 5CT T95 Casing stock of following Manufacturer

United Seamless Limited

Sumitomo Metals

Tenaris

Bao Steel

Indian Seamless Metal Tubes Limited

Yangzhou Lontrin Steel Tube

Maharastra Seamless Limited

Wuxi

Jindal Saw Ltd

Valourec & Mannesman -v&m