API 5L Seamless Pipe

  • Home
  • Products
  • API 5L Seamless Pipe
API 5L Seamless Pipe

API 5L Seamless Pipe

API 5L Carbon Steel Seamless Pipe

API 5L Carbon Steel Seamless Pipe

API 5L Seamless Line Pipe

API 5L Seamless Line Pipe

Schedule 40 API 5L Carbon Steel Seamless Line Pipe Supplier in Mumbai, India

Often, pipes in piping systems are produced to suit the nature of their application. Which means, that an API 5L Pipe Manufacturer In India will consider several points before recommending or customizing the pipes. For instance, if a pipe has requirements for properties such as toughness and hardness, most likely, the buyer would prefer purchasing carbon steel alloyed pipes. Aside from the fact that carbon steel possesses both hardness and toughness properties, which makes them attractive is their lower cost. Compared to stainless steel alloys, or even regular alloy steel grades, an API 5L Carbon Steel Pipe has lower alloying costs, due to the use of only 2 elements i.e. carbon and iron.

Typically, the construction of API 5L pipes could either be seamless or it could be welded. If a manufacturer is to produce an API 5L Seamless Pipe the construction process involved could be one of two methods i.e. - cold drawing or hot finishing. Cold drawing is a method used to build pipes by drawing them or shaping the pipe or tube at room temperature. Using cold drawing to manufacture a smaller diameter API 5L Schedule 40 Pipe, which yields closer tolerances, better finished surface as well as lighter walls. On the other hand, the pipes made from hot finishing, are built using heat, which in turn offers beneficial characteristics. Normally, hot finishing the API 5L Line Pipe is known to not only improve structural integrity and ductility but also Higher pressure integrity. Furthermore, these pipes have an improved and consistent toughness property in addition to having a greater factor of safety, while having an ordered and consistent microstructure.

It is frequently considered that a hot finished pipe would be superior, with regards to uniformity, while offering a stress free performance as well as consistent and reliable mechanical properties and improved service life as opposed to cold formed pipes.

This being said, carbon steel based pipes could be produced using 2 product specification levels, i.e. PSL 1 and PSL 2. For instance, API 5L PSL1 is considered to be a standard quality pipe for normal applications. Whereas PSL 2 pipes are produced with more details including its chemistry, testing methods and mechanical properties. Usually, an API 5L PSL2 is required to undergo testing and needs to mandatorily have details for tracing in addition to being certified. we are one of the supplier who provide cut to length pipe in all grade which saves your cost. Rexal Tubes is a API 5L Seamless Pipe supplier who stocks pipes in all surface finish

API 5L Seamless Pipes

API 5L Seamless Line Pipe in PSL 1 & PSL2

Api 5l Seamless Pipe Sizes
TYPE OD Thickness
SEAMLESS 1/4 - 36 inch 1.25 - 50mm
LSAW 219 - 3120mm 3 - 25mm
SSAW 16 - 64 inch 3 - 25mm
Weight of API 5L Seamless Line Pipe
NPS Outside Diameter Wall Thickness Weight Weight
in mm in mm Sched kg/Mtr Lb/ft
1/2″ 0.840 21 0.109 2.769 40 STD 1.268 0.851
0.147 3.734 80 STD 1.621 1.088
3/4″ 1.050 27 0.113 2.870 40 STD 1.684 1.131
0.154 3.912 80 STD 2.195 1.474
1″ 1.315 33 0.133 3.378 40 STD 2.501 1.679
0.179 4.547 80 STD 3.325 2.172
1 1/4″ 1.660 42 0.140 3.556 40 STD 3.385 2.273
0.191 4.851 80 STD 4.464 2.997
1 1/2″ 1.900 48 0.145 3.683 40 STD 4.048 2.718
0.200 5.080 80 STD 5.409 3.361
2″ 2.375 60 0.154 3.912 40 STD 5.441 3.653
0.218 5.537 80 STD 7.480 5.022
2 1/2″ 2.875 73 0.203 5.516 40 STD 8.629 5.793
0.276 7.010 80 STD 11.411 7.661
3″ 3.500 89 0.216 5.486 40 STD 11.284 7.576
0.300 7.620 80 STD 15.272 10.253
4″ 4.500 114 0.237 6.020 16.073 10.790
0.337 8.560 22.318 14.983
6″ 6.625 168 0.188 4.775 19.252 12.924
0.203 5.516 20.739 13.923
0.219 5.563 22.318 14.983
0.250 6.350 25.354 17.021
0.280 7.112 40 STD 58.263 18.974
0.312 7.925 31.334 21.036
0.375 9.525 37.285 25.031
0.432 10.973 80 XHY 42.561 28.573
0.500 12.700 48.719 32.708
8″ 8.625 219 0.188 4.775 25.233 16.940
0.203 5.156 27.198 18.259
0.219 5.563 29.286 19.661
0.250 6.350 20 33.308 22.361
0.277 7.036 30 36.786 24.696
0.322 8.179 40 42.352 28.554
0.375 9.525 49.216 33.041
0.406 10.312 60 53.085 35.638
0.500 12.700 80 XHY 64.627 43.388
10″ 10.750 273 0.188 4.775 31.588 21.207
0.219 5.563 36.689 24.631
0.250 6.350 20 41.759 28.035
0.307 7.798 30 51.002 34.240
0.344 8.738 56.946 38.231
0.365 9.271 40 STD 63.301 40.483
0.438 11.125 71.852 48.238
0.500 12.700 60 XHY 81.530 54.735
0.594 15.088 80 95.969 64.429
12″ 12.750 324 0.188 4.775 37.570 25.222
0.219 5.563 43.657 29.309
0.250 6.350 49.713 33.375
0.281 7.137 55.739 37.420
0.312 7.925 61.735 41.445
0.375 9.525 73.824 49.562
0.406 10.312 79.727 53.525
0.500 12.700 97.438 65.415
0.562 14.275 108.966 73.154
14″ 14.000 356 0.188 4.775 41.308 27.732
0.219 5.563 48.012 32.233
0.250 6.350 20 54.685 36.713
0.281 7.137 61.327 41.172
0.312 7.925 67.939 45.611
0.375 9.525 STD 81.281 54.568
0.438 11.125 40 94.498 63.441
0.500 12.700 XHY 107.381 72.090
0.625 15.875 132.983 89.278
16” 16.000 406 0.188 4.775 47.290 21.748
0.219 5.563 54.980 36.910
0.250 6.350 10 62.639 42.053
0.281 7.137 70.268 47.174
0.312 7.925 20 77.866 52.275
0.344 8.738 85.677 57.519
0.375 9.525

30

STD

93.213 62.578
0.438 11.125 108.433 72.797
0.500 12.700

40

XHY

123.289 82.770
18″ 18.000 457 0.219 5.563 61.948 41.588
0.250 6.350 70.593 47.393
0.281 7.137 79.208 53.176
0.312 7.925 20 87.792 58.939
0.375 9.525 STD 105.144 70.588
0.438 11.125 30 122.369 82.152
0.500 12.700 XHY 139.198 93.450
0.562 14.275 40 155.904 104.666
0.625 15.875 172.754 115.978
20″ 20.000 508 0.250 6.350 78.547 52.733
0.282 7.163 88.458 59.386
0.312 7.925 97.719 65.604
0.375 9.525 20 STD 117.075 78.598
0.438 11.125 136.305 91.508
0.500 12.700 30 XHY 155.106 104.130
0.594 15.088 40 183.378 123.110
0.625 15.875 192.640 129.328
0.688 17.475 211.368 141.901
24″ 24.000 610 0.250 6.350 94.456 63.413
0.281 7.137 106.029 71.183
0.312 7.925 117.573 18.932
0.375 9.525 20 STD 140.938 64.618
0.438 11.125 164.176 110.219
0.500 12.700 XHY 186.923 125.490
0.625 15.875 232.410 156.028
0.688 17.475 40 255.148 171.293
0.750 19.050 277.401 186.233
30″ 30.000 762 0.250 6.350 118.318 79.433
0.281 7.137 132.851 89.189
0.312 7.925 10 147.353 98.925
0.375 9.525 STD 176.731 118.648
0.438 11.125 205.983 138.286
0.500 12.700 20 XHY 234.647 157.530
0.625 15.875 30 292.066 196.078
0.688 17.475 320.817 215.380
0.750 19.050 348.988 234.293
36″ 36.000 914 0.250 6.350 142.180 95.453
0.281 7.137 159.672 107.196
0.312 7.925 10 177.133 118.918
0.375 9.525 STD 215.525 142.678
0.438 11.125 247.790 166.353
0.500 12.700 20 XHY 282.372 198.570
0.625 15.875 351.723 236.128

0.688

17.475 386.487 259.467

0.750

19.050 420.576 282.353
42″ 42.000 1067 0.312 7.925 206.914 138.911
0.375 9.525 STD 248.319 166.708
0.500 12.700 XHY 33.097 221.610
0.750 19.050 492.163 330.413
48″ 48.000 1219 0.375 9.525 STD 284.112 190.738
0.438 11.125 331.404 222.487
0.500 12.700 XHY 377.822 253.650
0.750 19.050 563.750 378.473
0.875 22.225 655.969 440.383
Api 5l Seamless Pipe Specification
5L Seamless Pipe 1/2" NB - 60" NB
5L PSL2 SAW Pipe 16" NB - 100" NB
ISO 3183 Seamless Pipe 1/2" NB - 24" NB
5L LSAW / DSAW 16’OD TO 54" OD (8 MM TO 50 MM THK)
Standard API, ISO 3183, ASTM, ASME
Test EN 10204 3.1, Mill TC EN 10204 3.1 Mill test, HIC, SSC, NACE MR0175, TM0177, IBR, TM0284, H2 SERVICE
Wall Thick. Schedule 10, 20, 30, STD, 40 (most popular), 60, XS, 80, 100, 120, 140, 160, XXS DIN, JIS
PSL Level
  • API 5L PSL 1
  • API 5L PSL 2
Pipes Marking All Pipes are marked as follows: Supplier or Manufacturer’s Name, Standard, Length, Grade, Outer Diameter, Thickness, Heat Number
Supplier & Distributors Located in Gujarat, Mexico, Sydney, Riyadh, Calgary, Coimbatore, Rajkot, Caracas, Kolkata, Montreal, Howrah, Noida, Surat, Perth, Manama, Nagpur, Ludhiana, Baroda, India, Thiruvananthapuram, Chennai, Santiago, Courbevoie, Ranchi, Jamshedpur, Karachi, Ludhiana, Ahmedabad, Port of Spain, Dammam, Bogota, Muscat, Ernakulam, Tehran, New Delhi, Gimhae si, Ankara, Vadodara, Khobar, Janeiro, Bengaluru, London, Indore, Hyderabad, Abu Dhabi, Melbourne, Gurgaon, Lagos, Mumbai, Tau, Istanbul, Bangalore, Kanpur, Pimpri Chinchwad, Kuwait, Ahvaz

Leading Supplier of API 5L Carbon Steel seamless & Dsaw Pipe

API 5L PSL2 Pipe Types

Carbon Steel Line Pipe

API 5L Carbon Steel Pipes
API 5L Lsaw Pipes
API 5L Dsaw Pipes

Carbon Steel Line Pipe

Pipeline transportation

API 5L Line Pipes
API 5L Seamless Pipes
API 5L Schedule 40 Pipes

Pipeline transportation

API 5L PSL2 mild seamless steel pipes

API 5L PSL2 mild seamless steel pipes

Carbon Steel 5L 12Inch SCH40 smls Line Pipes

Carbon Steel 5L 12Inch SCH40 smls Line Pipes

Carbon steel seamless pipes 5L, 160-315mm pipes line

Carbon steel seamless pipes 5L, 160-315mm pipes line

5l seamless line pipes

5l seamless line pipes

Carbon Steel 5L LSAW steel line pipe

Carbon Steel 5L LSAW steel line pipes

API 5l smls carbon steel pipes

api 5l steel pipe

Carbon Steel 5l hot rolled smls steel pipes 150mm diameter

Carbon Steel 5l hot rolled smls steel pipes 150mm diameter

34mm cs 5L smls steel pipes

34mm cs 5L smls steel pipes

5L Grade PSL2 smls Carbon steel line pipes

5L Grade PSL2 smls Carbon steel line pipes

CS Gr.B SCH 40 smls steel line pipes

CS Gr.B SCH 40 smls steel line pipes

Carbon steel API 5L seamless line pipes

Carbon steel API 5L seamless line pipes

API 5l smls carbon steel pipe

smls carbon steel pipes

Sch 40 API 5L Pipe Pressure Rating
Pipe O.D.
(in.)
API 5L Pipes Thickness Chart in (inches)
.028 .035 .049 .065 .083 .095 .109 .120
Working Pressure (psig)
1/8 7900 10100
1/4 3700 4800 7000 9500
5/16 3700 5400 7300
3/8 3100 4400 6100
1/2 2300 3200 4400
3/4 2200 3000 4000 4600
1 2200 2900 3400 3900 4300
API 5L Grades
API 5L Pipe Material Stock
5L Seamless Pipes 5L Carbon Steel Smls Pipes
Steel Grade 5L Seamless Pipes Spec 5L Line Pipes
ISO 3183 5L Pipesline API 5L PSL2 Pipes Line
Carbon Steel API 5L Sour Service Pipes Carbon Steel 5L LSAW Pipes
ISO 3183 Nace Pipesline ISO 3183 PE Coated Pipes
5L Gas Pipesline Grade 5L PTFE Lined Pipes
Steel Grade 5L Water Pipesline Steel Grade 5L Epoxy Coated Pipes
ISO 3183 5L Air Pipes ISO 3183 5L Spiral Seamless Pipes
5L Oil Linepipes Steel Grade 5L Bare Pipes
ISO 3183 5L Powder Coated Pipes Grade 5L Pipes Sleeve material
5L 3LPP Coating Pipes 5L PSL2 3LPE Coated Pipes
Carbon Steel Drill Pipes Spec 5L Cement Lined Pipes
Refer API 5L Schedule 40 and 80 Pipe Wall Thickness
Thickness Chart
5L Line Pipe Wall Thickness Chart mm (in) CS 5L Drill Pipe Tolerances mm (in) mm (in)
SMLS pipes b
≤ 4,0 ( 0.157) + 0,6 (0.024) - 0,5 (0.020)
> 4,0 ( 0.157) to < 25,0 (0.984) + 0,150 - 0,125
≥ 25,0 (0.984) +3,7 (0.146) or + 0,1 t whichever is the greater - 3,0 (0.120) or - 0,1 t whichever is the greater
ISO 3183 API 5L Pipeline Coating Types
  • Powder Coating
  • Epoxy Lining
  • 3LPE Coated (3 layers)
  • 3LPP Coating (3 Layer Polypropylene)
  • Internal Cement Lining
  • PTFE, PFA and FRP lined
  • Polyethylene (PE) Coated
Length of API 5L Carbon Steel Seamless Pipe
Threaded & Coupled Pipes Shortest Length in Entire Shipment Shortest Length in 95% of Entire Shipment Minimum Average Length of Entire Shipment
Single Random 16' 0" 18' 0" --
Double Random 22' 0" -- 35' 0"
API 5L PSL2 Chemical Composition

PSL1

Grade Carbon Manganese Phosphorus Sulfur
Grade A25 CL I .21 .60 .03 .03
CL II .21 .60 .03 .03
Grade A .22 .90 .03 .03
X42 .26 1.30 .03 .03
Grade B .26 1.20 .03 .03
X52 .26 1.40 .03 .03
X46 .26 1.40 .03 .03
X60 .26 1.40 .03 .03
X56 .26 1.40 .03 .03
X70 .26 1.65 .03 .030
X65 .26 1.45 .03 .03

PSL2

Grade Carbon( Manganese Phosphorus Sulfur
X42 .22 1.30 .025 .015
Grade B .22 1.20 .025 .015
X52 .22 1.40 .025 .015
X46 .22 1.40 .025 .015
X60 .22 1.40 .025 .015
X56 .22 1.40 .025 .015
X70 .22 1.65 .025 .015
X65 .22 1.45 .025 .015
X80 .22 1.90 .025 .015
Wide range of API 5L Seamless Pipe in PSL1 and PSL2 properties
API 5L Mechanical Properties

PSL1

Tensile Yield
Pound-force per square inch X 1000 megapascal Pound-force per square inch X 1000 megapascal
45 310 25 172
48 331 30 207
60 414 35 241
63 434 46 317
60 414 42 290
71 490 56 386
66 455 52 359
77 531 65 448
75 517 60 414
82 565 70 483

PSL2

Tensile Yield Energy
Pound-force per square inch x 1000 megapascal Pound-force per square inch x 1000 megapascal PCM IIW J leet/Lbs
60 To 110 414 To 758 35 To 65 241 To 448 .25 .43 27/41 20/30
60 To 110 414 To 758 42 To 72 290 To 496 .25 .43 27/41 20/30
63 To 110 434 To 758 46 To 76 317 To 524 .25 .43 27/41 20/30
66 To 110 455 To 758 52 To 77 359 To 531 .25 .43 27/41 20/30
71 To 110 490 To 758 56 To 79 386 To 544 .25 .43 27/41 20/30
75 To 110 517 To 758 60 To 82 414 To 565 .25 .43 27/41 20/30
77 To 110 531 To 758 65 To 82 448 To 565 .25 .43 27/41 20/30
82 To 110 565 To 758 70 To 82 483 To 565 .25 .43 27/41 20/30
90 To 120 621 To 827 80 To 102 552 To 705 .25 .43 27/41 20/30

API 5L Pipe supplier In India. Are you looking for api 5l steel pipe Dimensions & Price List, Find here

Api 5l Pipe Allowable Stress
 API 5L Seamless Pipe
API 5L Carbon Steel Pipe Schedule Chart
Nominal Pipe Size in Inch Outer Diameter API 5l Pipe SCH
SCH 10 SCH 20 SCH 30 SCH STD SCH 40 SCH 60 SCH XS SCH 80 SCH 100 SCH 120 SCH 140 SCH 160 SCH XXS
Wall Thickness (in)
1/8 0.405 0.068 0.068 0.095 0.095
1/4 0.540 0.088 0.088 0.119 0.119
3/8 0.675 0.091 0.091 0.126 0.126
1/2 0.840 0.109 0.109 0.147 0.147 0.187 0.294
3/4 1.050 0.113 0.113 0.154 0.154 0.219 0.308
1 1.315 0.133 0.133 0.179 0.179 0.250 0.358
1 1/4 1.660 0.140 0.140 0.191 0.191 0.250 0.382
1 1/2 1.900 0.145 0.145 0.200 0.200 0.281 0.400
2 2.375 0.154 0.154 0.218 0.218 0.344 0.436
2 1/2 2.875 0.203 0.203 0.276 0.276 0.375 0.552
3 3.500 0.216 0.216 0.300 0.300 0.438 0.600
3 1/2 4.000 0.226 0.226 0.318 0.318
4 4.500 0.237 0.237 0.337 0.337 0.438 0.531 0.674
5 5.563 0.258 0.258 0.375 0.375 0.500 0.625 0.750
6 6.625 0.280 0.280 0.432 0.432 0.562 0.719 0.864
8 8.625 0.250 0.277 0.322 0.322 0.406 0.500 0.500 0.594 0.719 0.812 0.906 0.875
10 10.750 0.250 0.307 0.365 0.365 0.500 0.500 0.594 0.719 0.844 1.000 1.125 1.000
12 12.750 0.250 0.330 0.375 0.406 0.562 0.500 0.688 0.844 1.000 1.125 1.312 1.000
14 14.000 0.250 0.312 0.375 0.375 0.438 0.594 0.500 0.750 0.938 1.094 1.250 1.406
16 16.000 0.250 0.312 0.375 0.375 0.500 0.656 0.500 0.844 1.031 1.219 1.438 1.594
18 18.000 0.250 0.312 0.438 0.375 0.562 0.750 0.500 0.938 1.156 1.375 1.562 1.781
20 20.000 0.250 0.375 0.500 0.375 0.594 0.812 0.500 1.031 1.281 1.500 1.750 1.969
22 22.000 0.250 0.375 0.500 0.375 0.875 0.500 1.125 1.375 1.625 1.875 2.125
24 24.000 0.250 0.375 0.562 0.375 0.688 0.969 0.500 1.219 1.531 1.812 2.062 2.344
30 30.000 0.312 0.500 0.625 0.375 0.500
32 32.000 0.312 0.500 0.625 0.375 0.688
34 34.000 0.312 0.500 0.625 0.375 0.688
36 36.000 0.312 0.500 0.625 0.375 0.750
42 42.000 0.500 0.625 0.375 0.750
API 5L Pipe Price List
Description Price Per Ton in INR Price Per Ton in USA $ Price Per Ton in UAE Dirham
sch40 api 5l line pipe black round carbon seamless pipe INR 42903.74 USA $ 588 AED 2159.72
API 5L 12 inch hot dipped galvanized pipe INR 48522.09 USA $ 665 AED 2442.55
API 5L SSAW Spiral Steel Pipe INR 36482.78 USA $ 500 AED 1836.50
API 5L Hot Rolled Seamless Steel Pipe INR 40131.05 USA $ 550 AED 2020.15
API 5L Spiral Galvanized Weld Steel Pipe INR 51075.89 USA $ 700 AED 2571.10

Please note: Price is subject to change without any prior notice. Due to Covid 19 we may not update the price frequently. You can mail to ritesh@rexaltubes.com for latest price in India.

API 5L Pipe Thickness Tolerance
Specified outside diameter D mm (in) of API 5L Pipes Diameter tolerances Milimeter (in) Out-of-roundness tolerances Milimeter (in)
Pipes except at end a Pipes end a,b,c Pipes except at end a Pipes end a,b,c
SMLS pipes Welded pipes SMLS pipes Welded pipes
< 60.3 (2.375) - 0.8 (0.031 ) to + 0.4 (0.016) - 0.4 (0.016) to + 1.6 (0.063) d
≥ 60.3 (2.375) to ≤ 168.3 (6.625) ± 0.007 5 D 0.020 D 0.015 D
≥ 168.3 (6.625) to ≤ 610 (24.00) ± 0.007 5 D ± 0.007 5 D but maximum of + 3.2 (0.125) ± 0.005 D, but maximum of ± 1.6 (0.063)
> 610 (24.000) to ≤ 1 422 (56.00) ± 0.01 D ± 0.005 D, but maximum of + 4.0 (0.160) ± 2.0 (0.079) ± 1.6 (0.063) 0.015 D 0.01 D,
but maximum of 15 (0.6), but maximum of 13 (0.5),
for d / ts ≤ 75 for d / ts ≤ 75
by agreement by agreement
for d / ts > 75 for d / ts > 75
> 1 422 (56 000) as agreed
API 5L Pipe Vs Astm A106 Gr.b

Chemical Requirement

Standards C max % Mn max% S max % Si min % Cr max % Cu max %
A106 Gr.B 0.30 0.29-1.06 0.035 0.10 0.40 0.40
API 5L Gr.B/L245 0.28 1.20 0.030 / 0.50 0.50


Tensile Requirement

Standards Tensile Strength Mpa Yield Strength Mpa Elongation %
A106 Gr.B ≥415 ≥240 20
API 5L Gr.B/L245 ≥415 ≥245 23

Equivalent standards

Standard SWAMLESS Other standards
API 5L Line Pipe B/L245 EN 10216-1 P265 BS 3601 430
A106 Gr.B EN 10216-2 P265GH BS 3601 430
Useful Information of API 5L PSL2 Pipe
SR3 Color Identification.
SR4 Nondestructive Inspection of Seamless Pipe.
SR5 Charpy impact Testing - Welded Pipe 20" & larger - Grade X52 or higher.
SR6 Drop Weight Tear Testing - Welded Pipe 20" & larger -Grade X52 or higher.
SR8 Fracture Tough ness Testing of Line Pipe.
20 years of Experience as a supplier of these materials in below mentioned locations
Products We supplied to following Locations
API 5L Large Diameter Concrete SSAW pipes for oil and gas spiral steel pipes South Africa, Bahrain, Singapore, Hoston
API 5L Standard Black Iron Pipes Steel Pipes And Tube Philippines, UK, Australia, Nigeria
API 5L sch40 seamless steel pipes Oman, UAE, Hong Kong, Malaysia
nps 44" 5l spiral tubing ssaw steel pipes Chile, Singapore, Iran, Italy
5L seamless carbon steel pipes used for gas and oil United Arab Emirates (UAE), Norway, Turkey, Malaysia
API 5L PSL1 102mm x 5mm x 7.5m steel pipes United Kingdom -UK, Malaysia, Europe, UAE
API 5L SSAW Spiral Internal Fbe Coating Steel Pipes Dammam -KSA, Belgium, Philippines, Indonesia.
API 5L seamless carbon steel pipes schedule 80 Qatar, Thailand, Europe, France.
APL 5L 3/4"-24" Seamless Steel pipes Malaysia, Thailand, Germany, Czechia
API 5L Line Steel Seamless Pipes & Tubing Finland, Bangladesh, Malaysia, USA
API 5L Black painting Steel Pipes Saudi Arabia (KSA), Kuwait, South Africa, Brazil
24 inch schedule 20 5L PSL 2 LSAW Steel Pipes Netherlands, Russia, Malaysia, Dubai
4 inch SCH40S API5L Seamless Carbon Steel Pipes Egypt, UK, Mexico, Spain
API 5L B pipes line seamless steel pipes UK, Ellington -United States, Poland, Canada
API 5L Hot Rolled Round Polished Seamless Carbon Steel Pipes Canada, Malaysia, Philippines, Singapore
API 5L SCH 40 80 160 carbon seamless steel pipes Japan, Romania, Europe, Malaysia
API 5L SMLS steel line pipes Sweden, China, Malaysia, Colombia
API 5L Seamless Pipes stock of following Manufacturer
Valourec & Mannesman -v & m

Valourec & Mannesman -v & m

Sumitomo Metals

Sumitomo Metals

Wuxi

Wuxi

Yangzhou Lontrin Steel Tube

Yangzhou Lontrin Steel Tube

Indian Seamless Metal Tubes Limited

Indian Seamless Metal Tubes Limited

Bao Steel

Bao Steel

Maharastra Seamless Limited

Maharastra Seamless Limited

Tenaris

Tenaris

United Seamless Limited

United Seamless Limited

Jindal Saw Ltd

Jindal Saw Ltd