ASTM A335 P11 Seamless Pipe

  • Home
  • Products
  • ASTM A335 P11 Seamless Pipe
ASTM A335 P11 Seamless Pipe

ASTM A335 P11 Seamless Pipe

Alloy Steel P11 Pipes

Alloy Steel P11 Pipes

SA335 Grade P11 Chrome Moly Pipe

SA335 Grade P11 Chrome Moly Pipe

Refer Alloy Steel P11 Seamless Pipe Wall Thickness

ASTM A335 P11 alloy steel pipe comes under the ASTM and ASME standard specifications. These pipes are made seamless, hot rolled and cold drawn. The ASTM A335 P11 pipe suppliers produce the pipes in nominal bore sizes ranging from 3/8 inches to 30 inches. The wall thicknesses of the pipes range up to 250mm. As a leading SA335 P11 pipe manufacturer we produce these pipes in schedules sch20 through XXS and heavier. The length of the pipes ranges up to 13 with single random, double random and custom cut to length sizes available. The SA335 P11 Material has 4% chromium with carbon, manganese, phosphorus, sulfur, silicon and molybdenum in the composition. This composition allows the SA335 Grade P11 Seamless Pipe to have 205MPa minimum yield strength, 415MPa minimum tensile strength, good temperature resistance, creep resistance, corrosion resistance, oxidation resistance and lasting performance. The ASME SA335 Grade P11 Chrome Pipe is produced and tested for the ASTM, ASME and API standards. The pipes can be rolled, cold drawn, normalizing rolled, thermomechanical rolled, formed, normalizing formed, normalized and tempered, quenched and tempered among other procedures as well. The ASTM A335 Gr P11 Pipe can be coated with epoxy resin, color pain or 3LPE coating to have extra corrosion resistance and wear and tear resistance. The pipe material also supports drawing, expanding, machining, sand blasting, shot blasting, galvanized or heat treatment and other forming operations. we are one of the supplier who provide cut to length pipe in all grade which saves your cost. Rexal Tubes is a ASTM A335 P11 Seamless Pipe supplier who stocks pipes in all surface finish

Alloy steel P11 pipe

ASTM A335 Gr P11 Seamless and ERW Pipe Manufacturer In India

ASTM A335 P11 Seamless Pipe Material Specification
Size in Inch 1/8 TO 24
Standards ASTM A335 / ASME SA335
Type Seamless
Outer Dimensions in Mm 19.05 To 114.3
Wall Thickness in MM 2 to 14
Length in Mm 16000
Schedule Schedule 80S, Schedule 80, Schedule10, Schedule 40, Schedule XXS, Schedule 160, Schedule XS, Schedule 5 Supplier and Manufacturer
Form Round, Rectangular, Hydraulic, Square
Length Double, Single, Cut Length
Tubing End Beveled, Plain, Treaded
Pipes Marking All Pipes are marked as follows: Supplier or Manufacturer’s Name, Standard, Length, Grade, Outer Diameter, Thickness, Heat Number
Supplier & Distributors Located in Gurgaon, Ahmedabad, Mumbai, London, Baroda, Janeiro, Tehran, Perth, Sydney, Mexico, India, Bangalore, Ankara, Bengaluru, Kolkata, Vadodara, Ahvaz, Riyadh, Hyderabad, Nagpur, Thiruvananthapuram, Surat, Kuwait, Noida, Coimbatore, Ludhiana, Lagos, Karachi, Montreal, Rajkot, Melbourne, Kanpur, Port of Spain, Ernakulam, Tau, Pimpri Chinchwad, Chennai, Gujarat, Khobar, Santiago, Calgary, Ranchi, Caracas, Istanbul, Dammam, Abu Dhabi, Gimhae si, Courbevoie, Muscat, New Delhi, Manama, Howrah, Ludhiana, Indore, Bogota, Jamshedpur
ASTM A335 Gr P11 Pipe Types
73mm Grade Astm A335 P11 Alloy Steel Seamless Pipes

73mm Grade Astm A335 P11 Alloy Steel Seamless Pipes

A335 P11 Alloy Welded Steel Pipe

A335 P11 Alloy Welded Steel Pipe

Astm A335 Gr P11 Alloy Seamless Steel Pipes

Astm A335 Gr P11 Alloy Seamless Steel Pipes

Sch40 Hot Rolled Astm A335p11 Alloy Seamless Steel Pipe

Sch40 Hot Rolled Astm A335 p11 Alloy Seamless Steel Pipe

Asme Sa335 Standard Material P11 Seamless Alloy Steel Pipes

Asme Sa335 Standard Material P11 Seamless Alloy Steel Pipes

Seamless Alloy Steel Pipe A335 Standard P11

Seamless Alloy Steel Pipe A335 Standard P11

Hot Rolled Alloy Steel Pipes Astm A335 P11

Hot Rolled Alloy Steel Pipes Astm A335 P11

Astm A335 P11 200mm Diameter Steel Pipes

Astm A335 P11 200mm Diameter Steel Pipes

8 inch Sch40 Astm A335 P11 Seamless Alloy Steel Pipes

8" Sch40 Astm A335 P11 Seamless Alloy Steel Pipes

Astm A335 P11 3 inch Nb X Sch Xxs

Astm A335 P11 3" Nb X Sch Xxs

Astm A335 P11 Sch 160 Pipes

Astm A335 P11 Sch 160 Pipes

Astm A335 P11 14 inch Sch 80 Pipes

Astm A335 P11 14" Sch 80 Pipes

Ask for Latest Price list of A335 gr P11 Welded Pipe and p11 pipes Sizes and Properties

ASTM A335 P11 Mechanical Properties
Tensile Strength Elongation Yield Strength
415 min 30 min 205 min
ASTM A335 P11 Composition
Carbon Manganese Phosphorus Sulfur Silicon Chromium Molybdenum
0.015 Maximum 0.30-0.60 0.025 Maximum 0.025 Maximum 0.50 Maximum 4.00-6.00 0.45-0.65
ASTM A335 P11 Alloy Steel Pipe Tensile
P-5 P-9 P-11 P-22 P-91
Tensile Strength
ksi 60 60 60 60 85
MPa 415 415 415 415 585
Yield Strength
ksi 30 30 30 30 60
MPa 205 205 205 205 415
Heat Treatment of A335 P11 Pipe
Grade Chart Type of Heat Treatment Normalizing Temp Range F Subcritical Tempering 
or Annealing 
Temp Range F 
Alloy P5 (b,c) Full / Isothermal Anneal    
  Normalize and Temper ***** 1250
  Subcritical Anneal (P5c only) ***** 1325 to 1375
Alloy P9 Full /or Isothermal Anneal    
  Normalize and Temper ***** 1250
Alloy P11 Full / Isothermal Anneal    
  Normalize and Temper ***** 1200
Alloy P22 Full / Isothermal Anneal    
  Normalize and Temper ***** 1250
Alloy P91 Normalize and Temper 1900-1975 1350-1470
  Quench and Temper 1900 To 1975 1350 To 1470
Tolerance Chart of SA335 Grade P11 Seamless Pipe
ASTM A530 & ASTM A335 NPS Outside Diameter, inch Tolerance
1/8≤Outer Diameter≤1-1/2 ±0.40
1-1/2<Outer Diameter≤4 ±0.79
4<Outer Diameter≤8 +1.59/-0.79
8<Outer Diameter≤12 +2.38/-0.79
Outer Diameter>12 ±1%
A 450 Hot Rolled Outer Diameter Tolerance
Outer Diameter≤101.6 +0.4/-0.8
101.6<Outer Diameter≤190.5 +0.4/-1.2
190.5<Outer Diameter≤228.6 +0.4/-1.6
Cold-Drawn Outer Diameter Tolerance
Outer Diameter<25.4 ±0.10
25.4≤Outer Diameter≤38.1 ±0.15
38.1<Outer Diameter<50.8 ±0.20
50.8≤Outer Diameter<63.5 ±0.25
63.5≤Outer Diameter<76.2 ±0.30
76.2≤Outer Diameter≤101.6 ±0.38
101.6<Outer Diameter≤190.5 +0.38/-0.64
190.5<Outer Diameter≤228.6 +0.38/-1.14
Check Dimensions of A335 Gr P11 Chrome Pipe and ASTM A335 P11 Pipes
ASME SA335 Grade P11 Chrome Pipe Size Chart
Outer Diameter * Thickness Outer Diameter * Thickness Outer Diameter * Thickness
38.1 * 3.2 57 * 4.9 76.2 * 4
38.1 * 4 57 * 6.3 76.2 * 5
38.1 * 6.3 57 * 7.9 76.2 * 6.3
42.4 * 3.2 60.3 * 3.2 82.5 * 4.5
42.4 * 4 60.3 * 3.6 88.9 * 3.2
44.5 * 3.2 60.3 * 5 88.9 * 3.6
44.5 * 6.3 63.5 * 3.2 88.9 * 4
48.3 * 3.2 63.5 * 3.6 101.6 * 3.6
48.3 * 3.6 63.5 * 4 101.6 * 4.5
50.8 * 4.5 63.5 * 6.3 101.6 * 6.3
51 * 3.2 63.5 * 7.9 114.3 * 3.6
51 * 3.6 70 * 3.2 114.3 * 5
51 * 6.3 70 * 3.6 139.7 * 4
57 * 3.2 70 * 6.3 139.7 * 5
57 * 3.6 76.2 * 3.6 139.7 * 6.3
Leading Supplier of ASTM A335 P11 Alloy Steel Pipe. Check Weight Chart of ASME SA335 P11 Material and Boiler Tube
P11 Pipe Weight Chart
Nominal Pipe Size Outer Diameter Wall Thickness Inner Diameter Weight per Foot
3/4 1.05 0.113 0.824 1.13
0.294 0.252 1.72
0.219 0.612 1.95
0.154 0.742 1.48
0.308 0.434 2.44
1/2 0.84 0.109 0.622 0.85
0.188 0.464 1.31
0.147 0.546 1.09
1 1.315 0.133 1.049 1.68
0.250 0.815 2.85
0.179 0.957 2.17
0.358 0.599 3.66
1 1/2 1.90 0.145 1.610 2.72
0.200 1.500 3.63
0.400 1.100 6.41
0.281 1.338 4.86
1 1/4 1.66 0.140 1.380 2.27
0.250 1.160 3.77
0.191 1.278 3.00
0.382 0.896 5.22
2 2.375 0.109 2.157 2.64
0.218 1.939 5.03
0.154 2.067 3.66
0.250 1.875 5.68
0.344 1.687 7.47
0.281 1.813 6.29
0.436 1.503 9.04
3 3.50 0.120 3.260 4.34
0.156 3.188 5.58
0.188 3.124 6.66
0.172 3.156 6.12
0.216 3.068 7.58
0.281 2.938 9.67
0.250 3.000 8.69
0.300 2.900 10.26
0.600 2.300 18.6
0.438 2.624 14.34
2 1/2 2.875 0.120 2.635 3.53
0.216 2.443 6.14
0.203 2.469 5.80
0.250 2.375 7.02
0.375 2.125 10.02
0.276 2.323 7.67
0.552 1.771 13.71
3 1/2 4.0 0.120 3.760 4.98
0.226 3.548 9.12
0.281 3.438 11.17
0.636 2..728 22.87
0.250 3.500 10.02
0.318 3.364 12.52
5 5.563 0.188 5.187 10.80
0.258 5.047 14.63
0.219 5.125 12.51
0.281 5.001 15.87
0.312 4.939 17.51
0.375 4.813 20.80
0.344 4.875 19.19
0.500 4.563 27.06
0.750 4.063 38.59
0.625 4.313 32.99
4 4.5 0.120 4.260 5.62
0.188 4.124 8.67
0.156 4.188 7.24
0.203 4.094 9.32
0.237 4.026 10.80
0.219 4.062 10.02
0.250 4.000 11.36
0.312 3.876 13.97
0.281 3.938 12.67
0.337 3.826 15.00
0.531 3.438 22.53
0.438 3.624 19.02
0.674 3.152 27.57
6 6.625 0.109 6.407 7.59
0.156 6.313 10.79
0.134 6.357 9.30
0.203 6.219 13.94
0.188 6.249 12.94
0.219 6.187 15.00
0.280 6.065 18.99
0.250 6.125 17.04
0.312 6.001 21.06
0.375 5.875 25.05
0.344 5.937 23.10
0.432 5.761 28.60
0.562 5.501 36.43
0.500 5.625 32.74
0.625 5.375 40.09
0.864 4.897 53.21
0.719 5.187 45.39
1.125 4.375 66.14
1.000 4.625 60.13
ASME SA 335 Alloy Steel P11 ERW Pipe Surface Finish

Surface Finishes: Concrete Coating, Coal Tar, 3LPP, Mill Varnish, Tape Wrap, Galv, 3LPE, Bare, FBE, Oiled, FBE Dual
End Finishes: Square Cut, Beveled, Threaded, Coupled.

AS P11 Heat Exchanger Pipe Hscode
Description HSN Code
ASTM A335 P11 Seamless Pipe 73045130
ASTM A335 P11 Seamless Pipe Price list
Description Price Per Ton in INR Price Per Ton in USA $ Price Per Ton in UAE Dirham
alloy steel ASTM A335 P11 seamless steel pipe 10" SCH100 INR 32877.68 USA $ 450 AED 1652.84
ASTM A335 Alloy Steel pipe P11 Seamless Pipes INR 73061.50 USA $ 1000 AED 3672.98
A335 p11 density mild carbon spiral welded steel pipe INR 43888.23 USA $ 600 AED 2203.86
schedule 80 p11 a335 alloy pipe INR 47489.98 USA $ 650 AED 2387.44
A335 p11 pipe s355 seamless steel pipe/tube INR 36573.53 USA $ 500 AED 1836.55
If you searching a supplier from these places check our suppliers below
Products We supplied to following Locations
ASTM A335 Alloy Steel P11 Seamless Pipes Kuwait, Brazil, South Africa, Saudi Arabia (KSA)
ASTM A335 P11 Seamless steel pipes/ steel tube Australia, Philippines, Nigeria, UK
A335 p11 density mild carbon spiral welded steel pipes Hong Kong, Oman, Malaysia, UAE
ASTM A335 P11 Seamless Alloy Steel Pipes Bahrain, Singapore, South Africa
Schedule 80 pP11 a335 alloy pipes Chile, Singapore, Italy, Iran
ASTM A335 P11 Seamless and Welding Sch80 XS Sch160 XXS Alloy Steel Pipes Norway, Malaysia, Turkey, United Arab Emirates (UAE)
ASTM A335 P11 SCH80 6" Alloy Steel Seamless Pipes Belgium, Philippines, Dammam -KSA, Indonesia.
Sch 80 a335 p11 pipes s355 seamless steel pipes/tube Malaysia, Philippines, Canada, Singapore
Astm a335 gr p11 alloy seamless steel pipes Romania, Japan, Europe, Malaysia
Hot Rolled 6 Inch ASTM A335 P11 Alloy Seamless Steel Pipes Sweden, China, Colombia, Malaysia
ASTM A335 P11 carbon steel seamless pipes Russia, Dubai, Netherlands, Malaysia
ASTM A335 P11 Low Alloy 42CrMo4 Alloy Steel Seamless Tube UK, Mexico, Egypt, Spain
astm a335 gr p11 alloy seamless steel pipes Poland, Canada, Ellington -United States, UK
astm a335 p11 carbon steel pipes 130mm diameter Europe, UAE, United Kingdom -UK, Malaysia
Hot Rolled ASTM A335 P11 Alloy Seamless Steel Pipes Europe, France, Thailand, Qatar
astm a335 p11 welded carbon steel pipe Malaysia, Germany, Czechia, Thailand
alloy steel ASTM A335 P11 seamless steel pipe 10" SCH100 USA, Bangladesh, Finland, Malaysia
Stocking Distributor of ASTM A335 P11 Pipe following manufacturers

Jindal Saw Ltd

Bao Steel

Maharastra Seamless Limited

Valourec & Mannesman -v&m

Sumitomo Metals

Tenaris

Wuxi

Yangzhou Lontrin Steel Tube

United Seamless Limited

Indian Seamless Metal Tubes Limited