EN 10025 S355j2g3 Structural Steel Pipe

  • Home
  • Products
  • EN 10025 S355j2g3 Structural Steel Pipe
EN 10025 Grade S355J2G3 Carbon Steel Seamless Pipe

EN 10025 Grade S355J2G3 Carbon Steel Seamless Pipe

Bs EN 10025-2 Structural Steel Tube

Bs EN 10025-2 Structural Steel Tube

EN 10025 S355j2g3 Seamless Pipe

EN 10025 S355j2g3 Seamless Pipe

DIN 1.0570 Structural and Offshore Steel Tubes supplier in India


View S355J2G3 Material Weight Chart, EN 10025-2 S355J2G3 Welded and Seamless Pipes Size Chart

EN 10025 S355J2G3 Steel Pipe is also recognized under the ASTM, ASME and API standards. The material is a low alloy steel with carbon, silicon, manganese, phosphorus, sulfur, chromium, molybdenum, nickel and aluminum in the composition. The S355J2G3 Structural And Offshore Steel Tube is used in offshore oil industries for structural applications. The material is made from sheets by welding and from ingots by drawing. The seamless and welded pipes have different dimensions. The material can have tensile strength up to 450MPa. The EN 10025 Grade S355J2G3 Carbon Steel Seamless Pipes are used in the petroleum, oil and gas, food production, chemical and other industrial applications. The dimensions vary for seamless pipes and welded pipes. The seamless pipes are smaller in diameter and the welded pipes have larger diameter. The EN 10025-2 S355J2G3 Material is corrosion resistant, strong, oxidation resistant and has high toughness. The material can be easily machined and supports other forming operations. The EN 10025 Steel Pipe can be welded without any preheating and can be cooled down after welding without any post weld heat treatments. The EN 10025 S355 Pipe is used in different applications conditions. The pipes can also be coated with different materials. The pipe ends vary from beveled to treaded or plain.

Specification of EN 10025 S355J2G3
Standard ASTM, ASME and API
Specialize Shim Sheet, Perforated Sheet, B. Q. Profile.
Size 0.5 - 200 MM THICK IN 1000 - 2500 MM WIDTH & 2500 - 12500 MM LENGTH
Form Ring (Flange), Perforated Sheet, Strip, Blank (Circle), Chequered Plate, Plain Sheet, Flats, Shim Sheet, Rolls, Coils, Foils
Finish 2B, Cold rolled sheet (CR), Hot rolled plate (HR), 2D, BA NO(8), SATIN
Hardness Hard, Quarter Hard, Half Hard, Soft, Spring Hard etc.
Grade EN 10025 S355J2G3 DIN 1.057
Types of EN 10025 S355J2G3 Steel Pipe
EN 10025 S355J2G3 hot rolled steel Pipe

EN 10025 S355J2G3 hot rolled steel Pipe

EN 10025 S355J2G3 Low alloy high strength steel Pipe

EN 10025 S355J2G3 Low alloy high strength steel Pipe

EN 10025 S355J2G3 Hot Rolled and Cold Rolled Steel Pipe

EN 10025 S355J2G3 Hot Rolled and Cold Rolled Steel Pipe

EN 10025 S355J2G3 n hot rolled steel Pipe

EN 10025 S355J2G3 n hot rolled steel Pipe

Hot Rolled Structural Steel Pipe EN 10025 S355J2G3

Hot Rolled Structural Steel Pipe EN 10025 S355J2G3

EN 10025 S355J2G3 Carbon Steel Pipe

EN 10025 S355J2G3 Carbon Steel Pipe

EN 10025 S355J2G3 Hot & Cold Rolled Structural Steel Pipe

EN 10025 S355J2G3 Hot & Cold Rolled Structural Steel Pipe

EN 10025 S355J2G3 Non Alloy Structure Steels Pipe and tubes

EN 10025 S355J2G3 Non Alloy Structure Steels Pipe and tubes

Refer EN 10025 S355 Pipe Dimension, Weight Chart and Chemical Composition

S355J2G3 Structural And Offshore Steel Tube Chemical Composition
Carbon Silicon Manganese Phosphorous Sulphur Molybdenum Nickel Chromium Copper Others
max 0.20 max 0.55 max 1.60 0.035 0.035
Mechanical Properties Table of EN 10025 Grade S355J2G3 Carbon Steel Seamless Pipes
Yield Strength Tensile Strength Elongation A5 min
MPa min ksi min MPa min MPa min ksi min Percentage
490 630
Equivalent of EN 10025-2 S355J2G3
DIN EN BS NFA ASTM ASME
DIN 23932)/23942) Grade St 52-3 EN 10025 Grade S355J2G3 NFA A 49-643 Grade TS 47 2
Tolerance of S355J2G3 Material
Outer diameter and wall Thickness
Execution Size Range OD Tolerance Wall tolerance
Hot-rolled Tube OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm ± 0.4 mm± 0.5 % of OD ± 0.7 mm± (5 % x wallthickness + 0.1 mm
Hot-rolled peeled tube All sizesWall < 12 mmWall - 12 mm + 0.25/- 0 mm ± 0.8 mm± (5 % x wall thickness+ 0.2 mm)
Cold Worked tubecold-rolled or cold-drawn OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* ± 0.30 mm± 0.35 mm± 0.40 mm
straightness of 1.0570 s355j2g3 Steel Pipe

The maximum deviation from the straight line is 1 mm on a gauge length of 1000 mm.

Dimension Length of EN 10025 S355 Pipe
Component length (mm) OD 30-100 mm OD 100-254 mm
10-100 + 1.0/- 0 + 2.0/- 0
100-600 + 2.0/- 0 + 3.0/- 0
600-1200 + 3.0/- 0 + 4.0/- 0
1200-5000 + 5.0/- 0 + 6.0/- 0
EN 10025 Grade S355J2G3 Pipe ovality

The maximum out-of-roundness is 65% of the total outer diameter tolerance.

View EN 10025 S355J2G3 Steel Pipe, View 10025-2 s355j2g3 Pipes and Tubes Sizes
EN 10025 S355J2G3 Welded Pipe Sizes
6.625" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050" O.D.) 8 ” IPS(8.625" O.D.)
SCH 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′ O.D.) 10" IPS(10.750" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660" O.D.) 12" IPS(12.750" O.D.)
SCH 10, 40, 80, 160, XXH SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900" O.D.) 14" IPS(14.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10 (.188), SCH40 (.375)
2" IPS(2.375" O.D.) 16" IPS(16.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875" O.D.) 18" IPS (18.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH-40 (.375)
3" IPS( 3.500" O.D.)
SCH 5, 10, 40, 80, 160, XXH
s355j2g3 en 10025 Tube Size Chart
Wall Sizes ( O.D.)
.010 1/16" , 1/8" , 3/16"
.020 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8"
.012 1/8"
.016 1/8" , 3/16"
.028 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2"
.035 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.049 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.065 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3"
.083 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3"
.095 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2"
.109 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
.120 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3"
.125 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4"
.134 1"
.250 3"
.375 3 1/2"
We Stock EN 10025 Steel Hot Rolled Pipe in Thickness Range of 5mm to 25mm, Purchase EN 10025 Tube at the best Price
Price of EN 10025 S355J2G3 Hot Rolled Welded Pipe
EN 10025 Grade S355J2G3 Pipe Price Per Piece in India EN 10025 Gr S355J2G3 Pipe Price in INR En 10025-2 S275jr Steel Pipe Price in UAE Dirham En 10025 S235jr3 Tube Price in Saudi Riyal
10025 Grade S355j2g3 Carbon Steel Seamless Pipe Price in India Rs.35778 UAE Dirham 1837.27 Saudi Riyal 1875.48
Grade S355j2g3 Pipe Price in India Rs.46512 UAE Dirham 2388.48 Saudi Riyal 2438.16
Structural Steel Bs 10025 Pipe Price List Rs.32200 UAE Dirham 1653.53 Saudi Riyal 1687.92
CS 10025 Grade S355j2g3 Seamless Pipe Cost in Mumbai Rs.35778 UAE Dirham 1837.27 Saudi Riyal 1875.48
Price of 10025-2 S275jr Steel Pipe in Mumbai Rs.39356 UAE Dirham 2021.00 Saudi Riyal 2063.04
En 10025 Mild Steel Tube Price in India Rs.50090 UAE Dirham 2572.22 Saudi Riyal 2625.72
Carbon Steel EN 10025 S355J2G3 Steel Pipes Application

EN 10025 Grade S355J2G3 Pipes are used mainly for automobile sectors, interior & exterior architectural structures, water pipe lines, Gas lines, Oil & Gas industries etc.