EN 10025 Steel Pipe

  • Home
  • Products
  • EN 10025 Steel Pipe
EN 10025 Steel Pipe

EN 10025 Steel Pipe

EN 10025 S235J2 Structural Steel Tubes

EN 10025 S235J2 Structural Steel Tubes

Grade S235JR EN 10025 Seamless Pipes

Grade S235JR EN 10025 Seamless Pipes

Supplier of En 10025 Seamless Pipes for chemical, marine, oil and gas industry


We Keep Bulk Stock of Werkstoff Nr En 10025 Welded Pipe at our stockyard, contact us for Free Sample & stock list

En 10025 Pipes suppliers produce these carbon steel pipes with carbon, silicon, manganese, phosphorus and sulfur content. The carbon content is 0.2% of the total weight. The EN 10025 Steel Pipes is made in seamless and welded conditions. The difference between the two is that the welded pipes have larger diameters and high absolute roughness where the En 10025 Seamless Pipes have low absolute roughness and smaller diameters. The seamless pipes are cold drawn or hot rolled from the raw material where the welded pipes are welded from plates to form the BS 10025 Wn 1.0570 Round Pipe. There are square, rectangular and hydraulic pipe types available as well. The diameter of the Werkstoff Nr En 10025 Welded Pipe ranges from 5mm to 1219.2mm and the diameter of the seamless pipes ranges from 4mm to 219mm. The standard wall thicknesses are from 0.5mm to 20mm for the En 10025 S275 Seamless Tube, pipe and welded tubular products, but the thicknesses can go over 100mm depending on the application requirements. The En 10025-3 Pipes also have schedules from sch5 through XXS. The En 10025-3 Square Pipes is used for structural applications where light weight is preferred. The square shape provides extra strength. The En 10025 ERW Pipes is used in high pressure, high temperature applications. The material has high corrosion resistance, temperature resistance, wear and tear resistance and toughness. The Bs 10025 Hot Rolled Pipes does not need to be heat treated after the formation. The preheating or post weld heat treatment is not necessary to weld the En 10025 Cold Drawn Pipes and it could be welded with most traditional methods.

Chemical Composition of En 10025 Pipe
Carbon Silicon Manganese Phosphorous Sulphur Molybdenum Nickel Chromium Copper Others
Maximum 0.20 Maximum 0.55 Maximum 1.60 0.035 0.035 - - - - -
Different Types of EN 10025 Steel Pipe
BS EN 10025 rectangular steel pipe

BS EN 10025 rectangular steel pipe

DIN EN 10025 ST52.3 Seamless Steel Pipe

DIN EN 10025 ST52.3 Seamless Steel Pipe

cold rolling EN 10025 s275jr structural steel pipe

cold rolling EN 10025 s275jr structural steel pipe

Black EN 10025 s275jr ms structural steel pipe

Black EN 10025 s275jr ms structural steel pipe

EN 10025 structural carbon steel pipe

EN 10025 structural carbon steel pipe

SS En 10025 S275Jr Structural Steel Pipe

SS En 10025 S275Jr Structural Steel Pipe

EN 10025 p235tr1 grade C steel pipe

EN 10025 p235tr1 grade C steel pipe

6 Inch Casing En 10025 Structural Steel Pipe

6 Inch Casing En 10025 Structural Steel Pipe

En 10025 S355jo Od 2032mm Hollow Steel Pipes

En 10025 S355jo Od 2032mm Hollow Steel Pipe

See En 10025-3 Pipes Properties, En 10025 Wn 1.0570 Round Pipes available for online order, buy at dealer price in India

En 10025 Seamless Pipes Mechanical Properties
Tensile Strength Elongation
megapascal Minimum megapascal Minimum ksi Minimum Percentage
490 630
Equivalent of En 10025 Wn 1.0570 Round Pipe
Director Identification Number European Standards British Standards
DIN 23932 / 23942 EN 10025 Grade S355J2G3 NFA A49 643 Grade TS 47 2
Check En 10025 Cold Drawn ERW Pipe Weight Chart and Specification Online
Specification chart of Werkstoff Nr En 10025 Welded Pipe
Standard No EN 10025
Outside Diameter in MM 21.3 To 457.2
Wall Thickness in MM 1.8 To 14.27
Circular Dimension Range in MM 26.9 To 323.9
Square Dimension Range in MM 25*25 To 300*300
Rectangular Dimension Range in MM 40*20 to 400*200
Pipe Marking All Pipe are marked as follows: Supplier or Manufacturer’s Name, Standard, Grade, OD, Thickness, Length, Heat Number
Length in Mm 6000 To 12 000/18 000
Schedule Schedule XS, Schedule 160, Schedule 40, Schedule XXS, Schedule 80 Supplier and Manufacturer
Supplier & Distributors Located in Pimpri Chinchwad, Melbourne, Mumbai, Manama, Calgary, Kolkata, Abu Dhabi, Gimhae si, Chennai, Thiruvananthapuram, Mexico, Santiago, Montreal, Noida, Hyderabad, Lagos, Janeiro, India, Baroda, Gujarat, Howrah, Sydney, Ernakulam, Jamshedpur, Bangalore, Dammam, Rajkot, Tau, Kanpur, Ludhiana, Ankara, Riyadh, Perth, Surat, Port of Spain, Bogota, Gurgaon, Muscat, Ahmedabad, Coimbatore, Courbevoie, Kuwait, New Delhi, Ludhiana, Khobar, Indore, Tehran, Karachi, Vadodara, Ahvaz, Ranchi, Nagpur, Caracas, London, Istanbul, Bengaluru
yield Chart of En 10025 S275 Seamless Tube

EN 10025-2

S235JR 1.0038 S275JR 1.0044 S355JR 1.0045 E295 1.0050
S235J2 1.0117 S275J2 1.0144 S355J2 1.0577 E360 1.0070
S235J0 1.0114 S275J0 1.0143 S355J0 1.0553 E335 1.0060

EN 10025-3

S275NL 1.0491 S355NL 1.0546 S420NL 1.8912 S460NL 1.8903
S275N 1.0490 S355N 1.0545 S420N 1.8902 S460N 1.8901

EN 10025-4

S275ML 1.8819 S355ML 1.8834 S420ML 1.8836 S460ML 1.8838
S275M 1.8818 S355M 1.8823 S420M 1.8825 S460M 1.8827

EN 10025-5

S235J2W 1.8961 S355J2WP 1.8946 S355J2W 1.8965
S235J0W 1.8958 S355J0WP 1.8945 S355J0W 1.8959 S355K2W 1.8967

EN 10025-6

S460QL 1.8906 S550Q 1.8904 S620QL1 1.8987 S890QL 1.8983
S460Q 1.8908 S500QL1 1.8984 S620QL 1.8927 S890Q 1.8940
S460QL1 1.8916 S550QL 1.8926 S690Q 1.8931 S890QL1 1.8925
S500QL 1.8909 S620Q 1.8914 S690QL1 1.8988
S500Q 1.8924 S550QL1 1.8986 S690QL 1.8928
Tolerance of En 10025-3 Pipes
Execution Size Range in MM Outer Diameter Tolerance in MM Wall tolerance in MM
Hot rolled peeled tube All sizes Wall < 12 Wall To 12 + 0.25/- 0 ± 0.8 ± (5 % x wall thickness+ 0.2 )
Hot rolled Tube Outer Diameter – 80 Outer Diameter > 80 Wall < 12 Wall - 12 ± 0.4 ± 0.5 % of Outer Diameter ± 0.7 ± (5 % x wallthickness + 0.1
Cold Worked tube cold rolled or cold drawn Outer Diameter < 40 Outer Diameter 40 - 80 Outer Diameter > 80 Wall Thickness < 6 Wall Thickness 6 To 8 Wall Thickness > 8 + 0.30/- 0 *+ 0.35/- 0 *+ 0.40/- 0 * ± 0.30 ± 0.35 ± 0.40
En 10025-3 Square Pipe Dimension Length
Component length in MM Outer Diameter 30 To 100 Outer Diameter 100 To 254
1200 To 5000 + 5.0/- 0 + 6.0/- 0
10 To 100 + 1.0/- 0 + 2.0/- 0
600 To 1200 + 3.0/- 0 + 4.0/- 0
100 To 600 + 2.0/- 0 + 3.0/- 0
En 10025 ERW Pipe Price List
EN 10025 Grade S355J2G3 Pipe Price in INR Price in Saudi Riyal Price in UAE Dirham
En 10025 Grade S355j2g3 Pipe Price in India Rs.46512 Saudi Riyal 2438.16 UAE Dirham 2388.48
CS En 10025 Grade S355j2g3 Seamless Pipe Cost in Mumbai Rs.35778 Saudi Riyal 1875.48 UAE Dirham 1837.27
Price of En 10025-2 S275jr Steel Pipe in Mumbai Rs.39356 Saudi Riyal 2063.04 UAE Dirham 2021.00
Always refer Bs En 10025 Hot Rolled Pipe Size and Schedule Chart before buy En 10025-3 Square Tube
Bs En 10025 Hot Rolled Pipe Size Chart
1/8 Inch IPS(.405 Inch Outer Diameter) 3 1/2 Inch IPS( 4.000 Inch Outer Diameter)
3/8 Inch IPS(.675 Inch Outer Diameter) 5 Inch IPS( 5.563 Inch Outer Diameter)
Schedule 40, 80 Schedule 10, 40, 80, 160, XXH
1/4 Inch IPS(.540 Inch Outer Diameter) 4 Inch IPS(4.500 Inch Outer Diameter)
Schedule 10, 40, 80 Schedule 10, 40, 80, 160, XXH
Schedule 10, 40, 80, 160, XXH Schedule-40 (.375)
Schedule 10, 40, 80 Schedule 10, 40, 80, 160, XXH
1/2 Inch IPS(.840 Inch Outer Diameter) 6 Inch IPS(6.625 Inch Outer Diameter)
Schedule 5, 10, 40, 80, 160, XXH Schedule 5, 10, 40, 80, 120, 160, XXH
3/4 Inch IPS(1.050 Inch Outer Diameter) 8 ” IPS(8.625 Inch Outer Diameter)
Schedule 10, 40, 80, 160, XXH Schedule 5, 10, 40, 80, 120, 160, XXH
1 Inch IPS:(1.315′ Outer Diameter) 10 Inch IPS(10.750 Inch Outer Diameter)
Schedule 5, 10, 40, 80, 160, XXH Schedule 10, 20, 40, 80 (.500), TRUE 80(.500)
2 Inch IPS(2.375 Inch Outer Diameter) 16 Inch IPS(16.000 Inch Outer Diameter)
1-1/4 Inch IPS(1.660 Inch Outer Diameter) 12 Inch IPS(12.750 Inch Outer Diameter)
1-1/2 Inch IPS(1.900 Inch Outer Diameter) 14 Inch IPS(14.000 Inch Outer Diameter)
Schedule 10, 40, 80, 160, XXH Schedule10 (.188), Schedule40 (.375)
Schedule 10, 40, 80, 160, XXH Schedule 10, 20, 40(.375), TRUE40(.406), Schedule80(.500)
Schedule 10, 40, 80, 160, XXH Schedule10(.188), Schedule40(.375)
2 1/2 Inch IPS(2.875 Inch Outer Diameter) 18 Inch IPS (18.000 Inch Outer Diameter)
3 Inch IPS( 3.500 Inch Outer Diameter) Schedule 5, 10, 40, 80, 160, XXH
En 10025 Cold Drawn Tube Size
Wall Thickness Outer Diameter Sizes in Inch
.012 1/8
.010 1/8, 1/16, 3/16
.065 3/4, 2 1/2, 1 1/4, 1 5/8, 1/2, 5/16, 7/8, 1, 1 3/4, 3/8, 16, 5/8, 1 1/2, 2, 3, 1/4
.020 1/16, 3/8, 5/16, 1/4, 1/8, 3/16
.125 3, 3/4, 1 1/4, 1, 1 1/2, 3 1/4, 2
.120 1 1/2, 1/2, 2, 3/4, 3, 2 1/4, 1, 5/8, 2 1/2, 7/8, 1 1/4
.016 1/8, 3/16
.028 3/16, 3/8, 5/16, 3/4, 1 1/2, 1/2, 1/4, 1, 2, 1/8
.035 1/4, 5/8, 3/4, 3/8, 2 1/4, 16, 3/16, 1 5/8, 1/2, 2, 7/16, 5/16, 1, 1/2, 7/8, 1 1/4, 1/8, 1
.134 1
.049 1 5/8, 2, 1 1/8, 1 1/4, 5/16, 3/4, 2 1/4, 1, 5/8, 1/2, 16, 3/16, 7/8, 3/8, 1/4, 1 1/2
.083 3/4, 1 1/4, 1/2, 1/4, 5/8, 7/8, 2 1/2,3, 1 7/8, 1, 1 5/8, 3/8, 1 1/2, 2
.095 1, 1-1/4, 1-1/2, 5/8, 2, 1/2,
.109 1/2, 1, 2, 1-1/4, 3/4, 1-1/2,
.250 3
.375 3 1/2