EN 10216-1 Alloy Steel Seamless Tubes
EN 10216-1 P265TR1 Seamless Tube
Werkstoff P235 Round Pipe
Supplier of EN 10216-1 Alloy Steel Seamless Tubes for chemical, marine, oil and gas industry
Table of contents
- Chemical Composition Chart of EN 10216-1 P265TR1 Seamless Tube
- What are the types of EN 10216-1 P265TR1 Seamless Steel Tube?
- Mechanical Composition of Werkstoff P235tr1 Round Pipe
- EN 10216-1 Grade P265TR1 Alloy Steel Seamless Tubes Tolerance
- EN 10216-1 Grade P265TR1 Tubes Thickness Chart
- Steel P235tr1 ERW Tube Dimensional Length
- Acier P235tr1 Tube Uses
We Keep Bulk Stock of EN 10216 Seamless Steel Pipes at our stockyard, contact us for Free Sample & stock list
Chemical Composition Chart of EN 10216-1 P265TR1 Seamless Tube
C, % |
Si, % |
Mn, % |
P, % |
S, % |
Cr, % |
Ni, % |
Cu, % |
Mo, % |
Nb, % |
Ti, % |
V, % |
0.20 max |
0.40 max |
1.40 max |
0.025 max |
0.020 max |
0.30 max |
0.30 max |
0.30 max |
0.08 max |
0.01 max |
0.04 max |
0.02 max |
What are the types of EN 10216-1 P265TR1 Seamless Steel Tube?
EN 10216-1, P265TR1 Carbon and Alloy Seamless Steel Boiler Tubes
EN 10216-1 1 - 30mm Wall Thickness Structural Steel Pipe
EN 10216-1 P265TR1 Seamless Round 30mm Structural Steel Tube
EN 10216-1 P265TR1 Low Pressure Seamless Boiler Steel Tube
EN 10216-1 30mm Wall Thickness Round Seamless Steel Tube
EN 10216-1P265TR1 Seamless Steel Pipe
EN 10216 P265TR1 cold finished seamless steel tube
EN 10216-1 P265TR1 Carbon and Alloy Seamless Steel Boiler Tubes
EN 10216-1 P265TR1 seamless steel pipe
Mechanical Composition of Werkstoff P235tr1 Round Pipe
Tensile Strength , MPa |
Yield Strength, MPa |
Elongation, % |
410-570 |
265 min |
21 min |
See Steel P235tr1 p235gh material Dimensions and Tolerance, Werkstoff P235tr1 heat exchanger tube available for online order, buy at dealer price in India
EN 10216-1 Grade P265TR1 Alloy Steel Seamless Tubes Tolerance
Outside Diameter, mm |
Tolerance |
OD≤219.1 |
±1%, 0.5mm min |
OD>219.1 |
±1%, 0.5mm min |
Always refer EN 10216-1 Grade P235TR1 non alloy steel tubes thickness and Schedule Chart before buy Tubo P235tr1
EN 10216-1 Grade P265TR1 Tubes Thickness Chart
Outside Diameter, mm |
WT/OD |
Tolerance |
OD≤219 |
WT/OD≤2.5% |
±12.5% or ±0.4mm |
2.5%＜WT/OD≤5% |
||
5%＜WT/OD≤10% |
||
WT>10% |
||
OD>219.1 |
WT/OD≤2.5% |
±20% |
2.5%＜WT/OD≤5% |
±15% |
|
5%＜WT/OD≤10% |
±12.5% |
|
WT/OD>10% |
±10% |
Check Acier P235tr1 ERW Pipe and Tubes Weight Chart and Specification Online
Steel P235tr1 ERW Tube Dimensional Length
| Component length (mm) | OD 30-100 mm | OD 100-254 mm |
| 10-100 | + 1.0/- 0 | + 2.0/- 0 |
| 100-600 | + 2.0/- 0 | + 3.0/- 0 |
| 600-1200 | + 3.0/- 0 | + 4.0/- 0 |
| 1200-5000 | + 5.0/- 0 | + 6.0/- 0 |
Acier P235tr1 Tube Uses
EN 10216-1 Grade P265TR1 Tubes are used mainly for automobile sectors, interior & exterior architectural structures, water pipe lines, Gas lines, Oil & Gas industries etc.
werkstoff p235tr1 Welded Pipe Testing
| Inspection and test type | Test frequency | |
| Mandatory tests | Ladle analysis | One ladle |
| Tensile testing | One per every tested batch | |
| Resilience testing at the temperature of 0ºC | ||
| Tightness testing | Every pipe | |
| Dimensional testing | - | |
| Visual inspection | - | |
| Optional tests | Ladle analysis | One ladle |
| Resilience testing on longitudinal samples at the temperature of -10ºC | One per every tested batch | |
| Wall thickness measurements at a distance from pipe ends | - | |
| Non-destructive testing in order to identify any longitudinal discontinuity | Every pipe | |