EN 10216-2 P235GH Pipes
EN 10216-2 Grade P235GH Seamless Tubes
P235gh tc1 Alloy Steel pipe
EN 10216-2 P235gh pipes are used with elevated temperature applications such as oil and gas, heat exchangers and pressure vessels. The EN 10216-2 P235gh Tc2 is a carbon alloy steel material that is normalized. The composition of the material makes it possible to have higher mechanical properties. The EN 10216-2 Pipe Dimensions range from 10.2mm to 711mm in outer diameters. The wall thicknesses of the pipes range from 1.6mm to 100mm. the schedules range from sch5 through XXS. The heavier wall thicknesses are also available according to customer requirements. The P235gh Steel Pipe has carbon, silicon, manganese, phosphorus, sulfur, molybdenum, nickel, chromium and copper in the composition. The P235gh Steel Material has 360MPa minimum yield strength and 500MPa minimum tensile strength. The EN 10216-2 material has many different grades with yield strengths ranging from 300MPa to 630MPa and minimum tensile strengths ranging from 40MPa to 830MPa. The EN 10216-2 Grade P235gh Alloy Steel Seamless Tubes can be of different types such as capillary tubes, heat exchanger tubes, cold drawn tubes, hot rolled tubes and so on. The production of the products can be through seamless or welded means. There are EN 10216-2 P265gh Equivalent grades which can be used in place of the material. Depending on the requirement and cost efficiency, the equivalent materials can also be used. The EN 10216-2 P235gh Tc1 is used in oil and gas, boiler, heat exchangers, power generation and in other high temperature high pressure applications.
Element | Carbon | Silicon | Mn | Manganese | Sulfur | Chromium b | Molybdenum b | Nickel b | Aluminum tot | Copper b c |
Niobium b | Cr+Cu +Mo+Ni |
|
Name | Number | Maximum | Maximum | Maximum | Maximum | Maximum | Maximum | Maximum | Maximum | Minimum | Maximum | Maximum | Maximum b |
P195TR2 | 1.0108 | 0 / 13 | 0 / 35 | 0 / 70 | 0 / 25 | 0 / 20 | 0 / 30 | 0 / 08 | 0 / 30 | 0 / 02 d | 0 / 30 | 0 / 010 | 0 / 70 |
P195TR1 | 1.0107 | 0 / 13 | 0 / 35 | 0 / 70 | 0 / 25 | 0 / 20 | 0 / 30 | 0 / 8 | 0 / 30 | - | 0 / 30 | 0 / 10 | 0 / 70 |
P235TR1 | 1.0254 | 0 / 16 | 0 / 35 | 1 / 20 | 0 / 25 | 0 / 20 | 0 / 30 | 0 / 08 | 0 / 30 | - | 0 / 30 | 0 / 10 | 0 / 70 |
P265TR1 | 1.0258 | 0 / 20 | 0 / 40 | 1 / 40 | 0 / 25 | 0 / 20 | 0 / 30 | 0 / 8 | 0 / 30 | - | 0 / 30 | 0 / 10 | 0 / 70 |
P265TR2 | 1.0259 | 0 / 20 | 0 / 40 | 1 / 40 | 0 / 25 | 0 / 20 | 0 / 30 | 0 / 8 | 0 / 30 | 0 / 2 d | 0 / 30 | 0 / 10 | 0 / 70 |
P235TR2 | 1.0255 | 0 / 16 | 0 / 35 | 1 / 20 | 0 / 25 | 0 / 20 | 0 / 30 | 0 / 8 | 0 / 30 | 0 / 2 d | 0 / 30 | 0 / 10 | 0 / 70 |
EN 10216-2 p235gh Seamless Boiler Steel Tubes
9000mm Seamless Cold Drawn Steel Tube EN 10216-2 p235gh
EN 10216-2 p235gh seamless pipe
EN 10216-2 p235gh pipe
steel tubes EN 10216-2
EN 10216-2 p235gh cold finished seamless steel tube
EN 10216-2 p235gh Boiler Steel Tubes
EN 10216-2 p235gh steel pipe
din2391 bs en 10216-2 p235gh seamless tube
Grade | Tensile Strength | Impact properties | ||||||||
Name | Number | yield strength | Tensile Strength | Elongation b c |
Min average temperature of °C | |||||
T=16 | 16 < T=40 | 40 < T=60 | l | t | ||||||
megapascal | megapascal | megapascal | megapascal | l | t | 0 | -10 | 0 | ||
P195TR1 e | 1.0107 | 195 | 185 | 175 | 320 - 440 | 27 | 25 | - | - | - |
P235TR1 e | 1.0254 | 235 | 225 | 215 | 360 - 500 | 25 | 23 | - | - | - |
P195TR2 | 1.0108 | 195 | 185 | 175 | 320 - 440 | 27 | 25 | 40 | 28 d | 27 |
P265TR2 | 1.0259 | 265 | 255 | 245 | 410 - 570 | 21 | 19 | 40 | 28 d | 27 |
P265TR1 e | 1.0258 | 265 | 255 | 245 | 410 - 570 | 21 | 19 | - | - | - |
P235TR2 | 1.0255 | 235 | 225 | 215 | 360 - 500 | 25 | 23 | 40 | 28 d | 27 |
Standards: JIS G3458, ASTM A335, DIN 17175, ASTM A213, ASTM A209, ASME SA213, NF A 49 213, BS 3059, JIS G3462,
Materials: 15Mo3, 243, TU 15 D 3, 15MoG, 20MoG, SA209T1, SA209T1a, P1, STBA12, STBA13, STPA12, C 0.5Mo,
Execution | Size Range in MM | Outer Diameter Tolerance in MM | Wall tolerance in MM |
---|---|---|---|
Hot rolled peeled tube | All sizes Wall < 12 Wall To 12 | + 0.25/- 0 | ± 0.8 ± (5 % x wall thickness+ 0.2 ) |
Hot rolled Tube | Outer Diameter – 80 Outer Diameter > 80 Wall < 12 Wall - 12 | ± 0.4 ± 0.5 % of Outer Diameter | ± 0.7 ± (5 % x wallthickness + 0.1 |
Cold Worked tube cold rolled or cold drawn | Outer Diameter < 40 Outer Diameter 40 - 80 Outer Diameter > 80 Wall Thickness < 6 Wall Thickness 6 To 8 Wall Thickness > 8 | + 0.30/- 0 *+ 0.35/- 0 *+ 0.40/- 0 * | ± 0.30 ± 0.35 ± 0.40 |
Component length in MM | Outer Diameter 30 To 100 | Outer Diameter 100 To 254 |
---|---|---|
1200 To 5000 | + 5.0/- 0 | + 6.0/- 0 |
10 To 100 | + 1.0/- 0 | + 2.0/- 0 |
600 To 1200 | + 3.0/- 0 | + 4.0/- 0 |
100 To 600 | + 2.0/- 0 | + 3.0/- 0 |
1/8 Inch IPS(.405 Inch Outer Diameter) | 3 1/2 Inch IPS( 4.000 Inch Outer Diameter) |
3/8 Inch IPS(.675 Inch Outer Diameter) | 5 Inch IPS( 5.563 Inch Outer Diameter) |
Schedule 40, 80 | Schedule 10, 40, 80, 160, XXH |
1/4 Inch IPS(.540 Inch Outer Diameter) | 4 Inch IPS(4.500 Inch Outer Diameter) |
Schedule 10, 40, 80 | Schedule 10, 40, 80, 160, XXH |
Schedule 10, 40, 80, 160, XXH | Schedule-40 (.375) |
Schedule 10, 40, 80 | Schedule 10, 40, 80, 160, XXH |
1/2 Inch IPS(.840 Inch Outer Diameter) | 6 Inch IPS(6.625 Inch Outer Diameter) |
Schedule 5, 10, 40, 80, 160, XXH | Schedule 5, 10, 40, 80, 120, 160, XXH |
3/4 Inch IPS(1.050 Inch Outer Diameter) | 8 ” IPS(8.625 Inch Outer Diameter) |
Schedule 10, 40, 80, 160, XXH | Schedule 5, 10, 40, 80, 120, 160, XXH |
1 Inch IPS:(1.315′ Outer Diameter) | 10 Inch IPS(10.750 Inch Outer Diameter) |
Schedule 5, 10, 40, 80, 160, XXH | Schedule 10, 20, 40, 80 (.500), TRUE 80(.500) |
2 Inch IPS(2.375 Inch Outer Diameter) | 16 Inch IPS(16.000 Inch Outer Diameter) |
1-1/4 Inch IPS(1.660 Inch Outer Diameter) | 12 Inch IPS(12.750 Inch Outer Diameter) |
1-1/2 Inch IPS(1.900 Inch Outer Diameter) | 14 Inch IPS(14.000 Inch Outer Diameter) |
Schedule 10, 40, 80, 160, XXH | Schedule10 (.188), Schedule40 (.375) |
Schedule 10, 40, 80, 160, XXH | Schedule 10, 20, 40(.375), TRUE40(.406), Schedule80(.500) |
Schedule 10, 40, 80, 160, XXH | Schedule10(.188), Schedule40(.375) |
2 1/2 Inch IPS(2.875 Inch Outer Diameter) | 18 Inch IPS (18.000 Inch Outer Diameter) |
3 Inch IPS( 3.500 Inch Outer Diameter) | Schedule 5, 10, 40, 80, 160, XXH |
Wall Thickness | Outer Diameter Sizes in Inch |
---|---|
.012 | 1/8 |
.010 | 1/8, 1/16, 3/16 |
.065 | 3/4, 2 1/2, 1 1/4, 1 5/8, 1/2, 5/16, 7/8, 1, 1 3/4, 3/8, 16, 5/8, 1 1/2, 2, 3, 1/4 |
.020 | 1/16, 3/8, 5/16, 1/4, 1/8, 3/16 |
.125 | 3, 3/4, 1 1/4, 1, 1 1/2, 3 1/4, 2 |
.120 | 1 1/2, 1/2, 2, 3/4, 3, 2 1/4, 1, 5/8, 2 1/2, 7/8, 1 1/4 |
.016 | 1/8, 3/16 |
.028 | 3/16, 3/8, 5/16, 3/4, 1 1/2, 1/2, 1/4, 1, 2, 1/8 |
.035 | 1/4, 5/8, 3/4, 3/8, 2 1/4, 16, 3/16, 1 5/8, 1/2, 2, 7/16, 5/16, 1, 1/2, 7/8, 1 1/4, 1/8, 1 |
.134 | 1 |
.049 | 1 5/8, 2, 1 1/8, 1 1/4, 5/16, 3/4, 2 1/4, 1, 5/8, 1/2, 16, 3/16, 7/8, 3/8, 1/4, 1 1/2 |
.083 | 3/4, 1 1/4, 1/2, 1/4, 5/8, 7/8, 2 1/2,3, 1 7/8, 1, 1 5/8, 3/8, 1 1/2, 2 |
.095 | 1, 1-1/4, 1-1/2, 5/8, 2, 1/2, |
.109 | 1/2, 1, 2, 1-1/4, 3/4, 1-1/2, |
.250 | 3 |
.375 | 3 1/2 |
En 10216 Material Price Per Piece in India | EN 10216-1 Grade P235TR1 Alloy Steel Price in INR | P355nl1 En 10216-3 Price in Saudi Riyal | Alloy Steel EN 10216-1 Grade P265TR1 Price in UAE Dirham |
---|---|---|---|
En 10216 Material Price in India | Rs.46542.60 | Saudi Riyal 2437.58 | UAE Dirham 2387.48 |
EN 10216-1 Grade P235TR1 Alloy Steel Price in India | Rs.60863.40 | Saudi Riyal 3187.60 | UAE Dirham 3122.09 |
P355nl1 En 10216-3 Price List | Rs.85924.80 | Saudi Riyal 4500.15 | UAE Dirham 4407.66 |
Alloy Steel EN 10216-1 Grade P265TR1 Cost in Mumbai | Rs.57283.20 | Saudi Riyal 3000.10 | UAE Dirham 2938.44 |
Price of EN 10216-1 Grade P235TR1 Tubes in Mumbai | Rs.42962.40 | Saudi Riyal 2250.07 | UAE Dirham 2203.83 |
Steel En 10216 Price in India | Rs.107406.00 | Saudi Riyal 5625.18 | UAE Dirham 5509.57 |
size in Mm | 5 To 1219.2 |
---|---|
Schedule | Schedule XS, Schedule 160, Schedule 40, Schedule XXS, Schedule 80 Supplier and Manufacturer |
Standard | JIS, EN, DIN, GB, IS, AISI, ASME, ASTM |
Seamless Pipe Size in MM | 4 to 219 Wall thickness: 0.5 to 20 |
Welded Pipe Size in MM | 5 to 1219.2 |
Seamless Tube Size in MM | 3.35 To 101.6 |
Length | Double Random, Single Random, Standard & Cut length |
Wall Thickness in inch | 0.020 to 0.220 |
Type | U bent, Straight, Seamless, Round, Welded, EFW, Tube Coil, ERW, Hydraulic, LSAW, Square, Fabricated, Boiler, Rectangular |
Finish | BA, Polished, AP, MF |
Form | Square, Hydraulic, Rectangular, Clad, U bent, Boiler, Hollow, LSAW, Straight, Round, |
End | Beveled, Plain, Treaded |
Pipe Marking | All Pipes are marked as follows: Supplier or Manufacturer’s Name, Standard, Grade, OD, Thickness, Length, Heat Number |
Nominal pipe size in Mm | Pipes Size in inch | Outer Diameter in MM | Sch 20 | Sch 30 | Sch STD | Sch 40 | Sch 60 | Sch EXTRA | Sch XS | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 | ¼ | 13.7 | 2.24 | 0.63 | 2.24 | 0.625 | 3.02 | 0.804 | ||||||
3 | 1/8 | 10.3 | 1.73 | 0.37 | 1.73 | 0.357 | 2.41 | 0.47 | ||||||
10 | 3/8 | 17.1 | 2.31 | 0.84 | 2.31 | 0.84 | 3.2 | 1.1 | ||||||
20 | ¾ | 26.7 | 2.87 | 1.69 | 2.87 | 1.68 | 3.91 | 2.2 | ||||||
15 | ½ | 21.3 | 2.77 | 1.26 | 2.77 | 1.26 | 3.73 | 1.62 | ||||||
32 | 11/4 | 42.2 | 3.56 | 3.39 | 3.56 | 3.38 | 4.85 | 4.47 | ||||||
25 | 1 | 33.4 | 3.38 | 2.5 | 3.38 | 2.5 | 4.55 | 3.24 | ||||||
40 | 11/2 | 48.3 | 3.68 | 4.05 | 3.68 | 4.05 | 5.08 | 5.41 | ||||||
65 | 21/2 | 73 | 5.2 | 8.63 | 5.16 | 8.63 | 7 | 11.41 | ||||||
50 | 2 | 60.3 | 3.9 | 5.44 | 3.9 | 5.44 | 5.5 | 7.48 | ||||||
80 | 3/8 | 88.9 | 5.5 | 11.3 | 5.5 | 11.3 | 7.62 | 15.3 | ||||||
100 | 4 | 114.3 | 6.02 | 16.07 | 6.02 | 16.07 | 8.56 | 22.3 | ||||||
90 | 31/2 | 1.6 | 5.74 | 13.57 | 5.74 | 13.57 | 8.08 | 18.63 | ||||||
125 | 5 | 141.3 | 6.6 | 21.77 | 6.55 | 21.77 | 9.53 | 30.9 | ||||||
200 | 8 | 219.1 | 6.35 | 33.3 | 7 | 36.8 | 8.2 | 42.5 | 8.2 | 42.5 | 10.3 | 53.1 | 12.7 | 64.6 |
150 | 6 | 168.3 | 7.11 | 28.26 | 7.11 | 28.26 | 10.97 | 42.5 | ||||||
250 | 10 | 273 | 6.35 | 41.7 | 7.8 | 51.3 | 9.27 | 60.3 | 9.27 | 60.3 | 12.7 | 81.5 | 12.7 | 81.5 |
350 | 14 | 355.6 | 7.92 | 68.1 | 9.53 | 81.3 | 9.53 | 81.3 | 11.13 | 94.3 | 15.1 | 126.4 | 12.7 | 107 |
300 | 12 | 323.9 | 6.35 | 49.7 | 8.4 | 65.2 | 9.53 | 73.8 | 10.3 | 79.7 | 14.3 | 109 | 12.7 | 97.4 |
450 | 18 | 457.2 | 7.92 | 87.8 | 11.1 | 122 | 9.53 | 105 | 14.3 | 156 | 19 | 206 | 12.7 | 130 |
400 | 16 | 406.4 | 7.92 | 77.9 | 9.5 | 93.3 | 9.53 | 93.3 | 12.7 | 123 | 16.7 | 160 | 12.7 | 123 |
500 | 20 | 508 | 9.53 | 117.2 | 12.7 | 155.1 | 9.53 | 177.2 | 15.1 | 183 | 20.6 | 248 | 12.7 | 155.1 |
600 | 24 | 609.6 | 9.53 | 141 | 14.3 | 210 | 9.53 | 141 | 17.4 | 255 | 24.5 | 355 | 12.7 | 187 |
550 | 22 | 558.8 | 9.53 | 129 | 12.7 | 171 | 9.53 | 129 | 22.2 | 294 | 12.7 | 171 |