EN 10216-5 1.4301 seamless pipe

  • Home
  • Products
  • EN 10216-5 1.4301 seamless pipe
EN 10216-5 Pipe

EN 10216-5 Pipe

EN-10216-4 Seamless Tubes

EN-10216-4 Seamless Tubes

Din En 10216-5 Tc1 ERW Pipes

Din En 10216-5 Tc1 ERW Pipes

PN En 10216-5 Tc1 Tubes & UNI EN-10216-4 Seamless Pipes supplier


ISO certified DIN En 10216-5 Tc1 ERW Pipes supplier in India

EN 10216-5 Pipe is made up of a material also known as X2CrNiMOSil8-5-3, or 1.4424. This material is made up of carbon, silicon, manganese, phosphorus, sulfur, 18% chromium, 5% nickel and nitrogen in the composition. The EN-10216-4 Seamless Tubes are made from similar material but with a lower chemical composition. The chemical composition with the high chromium and nickel components make the material oxidation resistance, corrosion resistance and acid resistant. The Astm A312 En 10216-5 Welded Pipe comes under the ASTM A790 and other international standards. The material has up to 900MPa minimum tensile strength and 480MPa minimum yield strength and 30% elongation rate at break. The Stainless Steel En 10216-5 Round Pipes are the most used types of pipes where there are square, rectangular and hydraulic pipe types are available as well. The En 10216-5 Tc1 Seamless Pipe is made up of cold drawing and hot rolling procedures. The pipes can range in dimensions variously for various applications. The lengths can range up to 12000mm and longer depending on the application requirements. The diameter of the Din En 10216-5 Tc1 ERW Pipes can range up to 1219.2mm or more depending on the application requirements with wall thicknesses ranging over 100mm. The usual wall thickness of the Tube Inox En 10216-5 is between 0.5mm to 20mm. The material can be welded with conventional methods and doesn’t require special procedures.

EN 10216-5 Pipe Thickness
Hot rolled Outside Diameter, mm Tolerance
30≤Outer Diameter ≤219.1, WT≤0.01*Outer Diameter and WT≤4 T1, ±15% or ±0.6mm
30≤Outer Diameter ≤219.1 T2, ±12.5% or ±0.4mm
219.1<Outer Diameter ≤610, WT≤0.05*Outer Diameter +22.5%/-15%
219.1<Outer Diameter ≤610, 0.05*Outer Diameter <WT≤0.09*Outer Diameter T1, ±15% or ±0.6 MM
219.1<Outer Diameter ≤610, WT>0.09*Outer Diameter T2, ±12.5% or ±0.4 MM
Cold Drawn Outside Diameter Tolerance
Outer Diameter ≤219.1 T3, ±10% or ±0.2 MM
Outer Diameter ≤219.1 T4, ±7.5% or ±0.15 MM
Length in MM: 5800; 6000; 6096; 7315; 11800; 12000
Maximum developed length: 32 meters, also U bending can be offered, each leg length can be 15.24 meters.
Various types of EN-10216-4 Seamless Tubes
En 10216-5 Carbon Seamless Steel Tubes

En 10216-5 Carbon Seamless Steel Tubes

BS EN 10216-5 seamless steel tubes for pressure vessel boiler

BS 10216-5 seamless steel tubes for pressure vessel boiler

En 10216-5 Cold Drawn / Cold Rolled Seamless Pipe

En 10216-5 Cold Drawn / Cold Rolled Seamless Pipe

En 10216-5 ERW Tubes

10216-5 ERW Tubes

En 10216-5 Tubes

En 10216-5 Tubes

En 10216-5 Hot Rolled Welded Pipes

En 10216-5 Hot Rolled Welded Pipes

Check Astm A312 En 10216-5 Welded Pipe size range and Mechanical Properties, PED approved Din En 10216-5 Tc1 ERW Pipes Supplier in India

Astm A312 En 10216-5 Welded Pipe Mechanical Composition Table
Tensile Strength Elongatio Yield Strength
700 To 900 30 minimum 480 minimum
Chemical Properties of Stainless Steel En 10216-5 Round Pipes
Carbon Silicon Manganese Phosphorus Sulfur Chromium Nickel Molybdenum Nitrogen
0.03 Maximum 1.4 To 2.0 1.2 To 2.0 0.035 Maximum 0.015 Maximum 18.0 To 19.0 4.5 To 5.2 2.5 To 3.0 0.05 To 0.10
Check dimensions and specification of Stainless Steel En 10216-5 Round Pipe and Tubes
En 10216-5 Tc1 Seamless Pipe Spec Chart
Standard EN 10216-5
Equivalent Standards DIN 17458, DIN 17456, GOST 9940-81, GOST 9941-81, ASME SA789, ASTM A790, ASTM A789, ASME SA790
Material X2CrNiMoSi18-5-3, 1.4424
Equivalent Materials SAF1805, S31500
Pipe Marking All Pipes are marked as follows: Supplier or Manufacturer’s Name, Standard, Grade, OD, Thickness, Length, Heat Number
Supplier & Distributors Located in Melbourne, Calgary, Howrah, Lagos, Muscat, Chennai, Hyderabad, Janeiro, Mumbai, Kanpur, Noida, Ankara, Istanbul, Manama, Mexico, Bogota, Kuwait, Port of Spain, Pimpri Chinchwad, Rajkot, Surat, Bangalore, Riyadh, India, Nagpur, Santiago, Baroda, Tau, Indore, Thiruvananthapuram, Ahmedabad, Karachi, Ludhiana, Perth, Khobar, Ludhiana, Gimhae si, Bengaluru, Caracas, Ernakulam, Gujarat, Montreal, Ahvaz, Gurgaon, Kolkata, Coimbatore, Tehran, Sydney, New Delhi, Vadodara, Courbevoie, London, Ranchi, Jamshedpur, Dammam, Abu Dhabi/td>
Manufacturer of Tube Inox En 10216-5, Refer NF EN 10216-5 Boiler Pipe Tolerance
EN 10216-5 Pipe Dimension Tolerance
Hot rolled Outside Diameterin mm Tolerance
30≤ Outer Diameter≤219.1 D2, ±1% or ±0.5mm
219.1< Outer Diameter≤610 D1, ±1.5% or ±0.75mm
Cold Drawn Outside Diameter in mm Tolerance
Outer Diameter≤219.1 D3, ±0.75% or ±0.3mm
Outer Diameter≤219.1 D4, ±0.5% or ±0.1mm
Size Chart of EN 10216-5 ERW Pipe
1/8 Inch IPS(.405 Inch Outer Diameter) 3 1/2 Inch IPS( 4.000 Inch Outer Diameter)
3/8 Inch IPS(.675 Inch Outer Diameter) 5 Inch IPS( 5.563 Inch Outer Diameter)
Schedule 40, 80 Schedule 10, 40, 80, 160, XXH
1/4 Inch IPS(.540 Inch Outer Diameter) 4 Inch IPS(4.500 Inch Outer Diameter)
Schedule 10, 40, 80 Schedule 10, 40, 80, 160, XXH
Schedule 10, 40, 80, 160, XXH Schedule-40 (.375)
Schedule 10, 40, 80 Schedule 10, 40, 80, 160, XXH
1/2 Inch IPS(.840 Inch Outer Diameter) 6 Inch IPS(6.625 Inch Outer Diameter)
Schedule 5, 10, 40, 80, 160, XXH Schedule 5, 10, 40, 80, 120, 160, XXH
3/4 Inch IPS(1.050 Inch Outer Diameter) 8 ” IPS(8.625 Inch Outer Diameter)
Schedule 10, 40, 80, 160, XXH Schedule 5, 10, 40, 80, 120, 160, XXH
1 Inch IPS:(1.315′ Outer Diameter) 10 Inch IPS(10.750 Inch Outer Diameter)
Schedule 5, 10, 40, 80, 160, XXH Schedule 10, 20, 40, 80 (.500), TRUE 80(.500)
2 Inch IPS(2.375 Inch Outer Diameter) 16 Inch IPS(16.000 Inch Outer Diameter)
1-1/4 Inch IPS(1.660 Inch Outer Diameter) 12 Inch IPS(12.750 Inch Outer Diameter)
1-1/2 Inch IPS(1.900 Inch Outer Diameter) 14 Inch IPS(14.000 Inch Outer Diameter)
Schedule 10, 40, 80, 160, XXH Schedule10 (.188), Schedule40 (.375)
Schedule 10, 40, 80, 160, XXH Schedule 10, 20, 40(.375), TRUE40(.406), Schedule80(.500)
Schedule 10, 40, 80, 160, XXH Schedule10(.188), Schedule40(.375)
2 1/2 Inch IPS(2.875 Inch Outer Diameter) 18 Inch IPS (18.000 Inch Outer Diameter)
3 Inch IPS( 3.500 Inch Outer Diameter) Schedule 5, 10, 40, 80, 160, XXH
Din En 10216-5 Tc1 Tube Sizes
Wall Thickness Outer Diameter Sizes in Inch
.012 1/8
.010 1/8, 1/16, 3/16
.065 3/4, 2 1/2, 1 1/4, 1 5/8, 1/2, 5/16, 7/8, 1, 1 3/4, 3/8, 16, 5/8, 1 1/2, 2, 3, 1/4
.020 1/16, 3/8, 5/16, 1/4, 1/8, 3/16
.125 3, 3/4, 1 1/4, 1, 1 1/2, 3 1/4, 2
.120 1 1/2, 1/2, 2, 3/4, 3, 2 1/4, 1, 5/8, 2 1/2, 7/8, 1 1/4
.016 1/8, 3/16
.028 3/16, 3/8, 5/16, 3/4, 1 1/2, 1/2, 1/4, 1, 2, 1/8
.035 1/4, 5/8, 3/4, 3/8, 2 1/4, 16, 3/16, 1 5/8, 1/2, 2, 7/16, 5/16, 1, 1/2, 7/8, 1 1/4, 1/8, 1
.134 1
.049 1 5/8, 2, 1 1/8, 1 1/4, 5/16, 3/4, 2 1/4, 1, 5/8, 1/2, 16, 3/16, 7/8, 3/8, 1/4, 1 1/2
.083 3/4, 1 1/4, 1/2, 1/4, 5/8, 7/8, 2 1/2,3, 1 7/8, 1, 1 5/8, 3/8, 1 1/2, 2
.095 1, 1-1/4, 1-1/2, 5/8, 2, 1/2,
.109 1/2, 1, 2, 1-1/4, 3/4, 1-1/2,
.250 3
.375 3 1/2