EN 10217 Welded / ERW Pipe

  • Home
  • Products
  • EN 10217 Welded / ERW Pipe
 En 10217 Welded Pipe

En 10217 Welded Pipe

1.4404 EN 10217-7 Seamless Tube

1.4404 EN 10217-7 Seamless Tube

En 10217 ERW Pipe

En 10217 ERW Pipe

EN 10217 Pipe and DIN EN 10217-7 Pipes Supplier in india


Bs EN 10217 Erw Pipe Suppliers, Have difficulty to find 1.4404 EN 10217-7 Seamless Tube in tough sizes ? Call Rexal Tubes now

En 10217 Pipe is a non – steel alloy that is intended for pressure applications. There are different parts of the same En 10217-1 Pipe specification that have different mechanical and physical properties with varying dimensions. The Din En 10217-7 Pipe diameters for the efw pipes vary from 5mm to 1219.2mm. The schedules range from sch5 through XXS and heavier. The En 10217 Welded Pipe is produced by electric resistance welding. The pipe length can vary from single random, double random to custom cut to length sizes. The En 10217 ERW Pipe can be made with larger diameter. There are different grades under the same specification and they have carbon, silicon, manganese, phosphorus, sulfur, chromium, molybdenum, nickel and nitrogen in the composition. The 1.4404 En 10217-7 Welded Tube has lower diameters than the pipes. The tubes are used in small fluid flow volumes. The Inox En 10217-7 Seamless Pipes are used with precise applications as they have higher dimensional accuracies. The minimum tensile strength of the Din En Iso 10217 Pipes range up to 730MPa and the minimum yield strength up to 235MPa. The Acero En 10217 Round Pipes are the most commonly used type of pipe where there are square and hydraulic pipes are available. The Bs En 10217 Hot Rolled Pipes do not require heat treatment to harden them. The preheating or post weld heat treatment methods are also not required for the En 10217 Tc1 Tubes to be welded.

Specification Table of EN 10217 Pipe
size in Mm 5 To 1219.2
Schedule Schedule XS, Schedule 160, Schedule 40, Schedule XXS, Schedule 80 Supplier and Manufacturer
Standard JIS, EN, DIN, GB, IS, AISI, ASME, ASTM
Seamless Pipe Size in MM 4 to 219 Wall thickness: 0.5 to 20
Welded Pipe Size in MM 5 to 1219.2
Seamless Tube Size in MM 3.35 To 101.6
Length Double Random, Single Random, Standard & Cut length
Finish BA, Polished, AP, MF
Form Square, Hydraulic, Rectangular, Clad, U bent, Boiler, Hollow, LSAW, Straight, Round,
Wall Thickness in inch 0.020 to 0.220
Type U bent, Straight, Seamless, Round, Welded, EFW, Tube Coil, ERW, Hydraulic, LSAW, Square, Fabricated, Boiler, Rectangular
End Beveled, Plain, Treaded
Pipe Marking All Pipes are marked as follows: Supplier or Manufacturer’s Name, Standard, Grade, OD, Thickness, Length, Heat Number
Supplier & Distributors Located in Lagos, Mexico, Bangalore, Noida, Karachi, Vadodara, Sydney, Baroda, Hyderabad, Ernakulam, Tau, Riyadh, Montreal, Manama, Ahvaz, Chennai, Khobar, Bogota, Thiruvananthapuram, Pimpri Chinchwad, Howrah, Ludhiana, Mumbai, Rajkot, Ludhiana, Istanbul, Kuwait, Gurgaon, Muscat, Caracas, Jamshedpur, Surat, Coimbatore, Gimhae si, India, Tehran, Santiago, Nagpur, Gujarat, Ankara, Port of Spain, Kolkata, New Delhi, Abu Dhabi, Perth, Ranchi, Courbevoie, Bengaluru, Ahmedabad, Indore, Melbourne, Calgary, Janeiro, London, Dammam, Kanpur

We Guarantee Fastest Delivery of UNE EN 10217 Welded Pipe with All Documents Including Mill Certificate

Most frequent types of EN 10217-1 Pipe
EN 10217-7 Stainless Steel Industrial Pipe

EN 10217-7 Stainless Steel Industrial Pipe

EN 10217 Welded Steel Pipe

EN 10217 Welded Steel Pipe

EN 10217-1 Non-alloy steel tubes

EN 10217-1 Non-alloy steel tubes

Seamless EN 10217 Carbon Steel Tube

Seamless EN 10217 Carbon Steel Tube

Welded Steel Grade EN 10217 P195 Tubes

Welded Steel Grade EN 10217 P195 Tubes

DIN EN 10217-1 LSAW Steel Heat Exchanger Tube

DIN EN 10217-1 LSAW Steel Heat Exchanger Tube

Carbon Steel EN 10217 Capillary Tube

Carbon Steel EN 10217 Capillary Tube

EN 10217 Carbon Steel Spirally Schedule 80 Pipe

EN 10217 Carbon Steel Spirally Schedule 80 Pipe

EN 10217 Black Steel Exhaust Tube

EN 10217 Black Steel Exhaust Tube

BS EN 10217 Pipe

BS EN 10217 Pipe

Supply Cut to length UNI EN 10217 ERW Pipe in all sizes and diameter as per Client requirement
DIN EN 10217-7 Pipe Size Chart in Inches
1/8 Inch IPS(.405 Inch Outer Diameter) 3 1/2 Inch IPS( 4.000 Inch Outer Diameter)
3/8 Inch IPS(.675 Inch Outer Diameter) 5 Inch IPS( 5.563 Inch Outer Diameter)
Schedule 40, 80 Schedule 10, 40, 80, 160, XXH
1/4 Inch IPS(.540 Inch Outer Diameter) 4 Inch IPS(4.500 Inch Outer Diameter)
Schedule 10, 40, 80 Schedule 10, 40, 80, 160, XXH
Schedule 10, 40, 80, 160, XXH Schedule-40 (.375)
Schedule 10, 40, 80 Schedule 10, 40, 80, 160, XXH
1/2 Inch IPS(.840 Inch Outer Diameter) 6 Inch IPS(6.625 Inch Outer Diameter)
Schedule 5, 10, 40, 80, 160, XXH Schedule 5, 10, 40, 80, 120, 160, XXH
3/4 Inch IPS(1.050 Inch Outer Diameter) 8 ” IPS(8.625 Inch Outer Diameter)
Schedule 10, 40, 80, 160, XXH Schedule 5, 10, 40, 80, 120, 160, XXH
1 Inch IPS:(1.315′ Outer Diameter) 10 Inch IPS(10.750 Inch Outer Diameter)
Schedule 5, 10, 40, 80, 160, XXH Schedule 10, 20, 40, 80 (.500), TRUE 80(.500)
2 Inch IPS(2.375 Inch Outer Diameter) 16 Inch IPS(16.000 Inch Outer Diameter)
1-1/4 Inch IPS(1.660 Inch Outer Diameter) 12 Inch IPS(12.750 Inch Outer Diameter)
1-1/2 Inch IPS(1.900 Inch Outer Diameter) 14 Inch IPS(14.000 Inch Outer Diameter)
Schedule 10, 40, 80, 160, XXH Schedule10 (.188), Schedule40 (.375)
Schedule 10, 40, 80, 160, XXH Schedule 10, 20, 40(.375), TRUE40(.406), Schedule80(.500)
Schedule 10, 40, 80, 160, XXH Schedule10(.188), Schedule40(.375)
2 1/2 Inch IPS(2.875 Inch Outer Diameter) 18 Inch IPS (18.000 Inch Outer Diameter)
3 Inch IPS( 3.500 Inch Outer Diameter) Schedule 5, 10, 40, 80, 160, XXH
EN 10217 Welded Pipe Equivalent Grade
Name Number Grade
X2CrNi18-9 1.4307 304L
X2CrNiMoN22-5-3 1.4462 2205
X5CrNi18-10 1.4301 304
X2CrNiMo18-15-4 1.4438 317L
X6CrNiTi18-10 1.4541 321
X2CrNiMo17-12-2 1.4404 316L
X6CrNiMoTi17-12-2 1.4571 316Ti
EN 10217 Erw Pipe Price Per Kg in India
EN 10217-1 Non-alloy steel Price Per Piece in India BS EN 10217-2 Electric Price in INR EN10217-2 P235GH Steel Price in UAE Dirham CS EN 10217-5 Submerged arc Price in Saudi Riyal
Price of WELDED STAINLESS STEEL TUBE- 12160,SWG 304L/EN 10217-7 EN 1.4307 SIZE 76.2X1.63X6000 MM in Mumbai Rs.422 UAE Dirham 21.95 Saudi Riyal 22.38
WELDED STAINLESS STEEL TUBE- 10547,DIN 316L/EN 10217-7 EN 1.4404 SIZE 40.0X1.50X6000 MM Price in India Rs.435 UAE Dirham 22.62 Saudi Riyal 23.07
WELDED TUBE ROUND 1.4876 INCOLOY NO8800 9.53 X 0.5 MM EN 10217-7 WRBB95320310002 (FOR THE MFR. OF HEATING ELEMENT) Price in India Rs.90 UAE Dirham 4.68 Saudi Riyal 4.77
WELDED TUBES ACID PROOF, CALI-BRATED, BRIGHT ANNEALED, ACC. TO EN 10217-7 ICI, EN ISO 1127 D3/T3 10,00 X 1,00 MM ROCES Price in India Rs.416 UAE Dirham 21.64 Saudi Riyal 22.06
WELDED TUBES ACID PROOF, CALI-BRATED, BRIGHT ANNEALED, ACC. TO EN 10217-7 ICI, EN ISO 1127 D3/T3 10,00 X 1,00 MM PRICES Price List Rs.323 UAE Dirham 16.80 Saudi Riyal 17.13
WELDED STAINLESS STEEL TUBE- 12435, ISO 304L/EN 10217-7 EN 1.4307 SIZE 38.0X1.20X6000 MM Cost in Mumbai Rs.326 UAE Dirham 16.95 Saudi Riyal 17.29
1.4404 EN 10217-7 Welded Tube Size in Inches
Wall Thickness Outer Diameter Sizes in Inch
.010 1/16, 1/8, 3/16
.020 1/16, 1/8, 3/16, 1/4, 5/16, 3/8
.120 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 2, 2 1/4, 2 1/2, 3
.083 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 1 7/8, 2, 2 1/2,3
.012 1/8
.016 1/8, 3/16
.028 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 3/4, 1, 1 1/2, 2
.035 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 2, 2 1/4
.134 1
.049 3/16, 1/4, 5/16, 3/8, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/8, 1 1/4, 1 1/2, 1 5/8, 2, 2 1/4
.065 1/4, 5/16, 3/8, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 1 3/4, 2, 2 1/2, 3
.095 1/2, 5/8, 1, 1 1/4, 1 1/2, 2
.109 1/2, 3/4, 1, 1 1/4, 1 1/2, 2
.250 3
.125 3/4, 1, 1 1/4, 1 1/2, 2, 3, 3 1/4
.375 3 1/2
DIN EN Iso 10217 Pipes Temperature Range
Grade Temperature in C
Element No 50 100 150 200 250 300 350 400 450 500 550
X2CrNi19-11 1.4306 165 147 132 118 108 100 94 89 85 81 80
X2CrNi18-9 1.4307 165 147 132 118 108 100 94 89 85 81 80
X2CrNiN18-10 1.4311 255 205 175 157 145 136 130 125 121 119 118
X6CrNiTi18-10 1.4541 190 176 167 157 147 136 130 125 121 119 118
X5CrNi18-10 1.4301 180 157 142 127 118 110 104 98 95 92 90
X6CrNiNb18-10 1.4550 195 177 167 157 147 136 130 125 121 119 118
X5CrNiMo17-12-2 1.4401 193 177 162 147 137 127 120 115 112 110 108
X2CrNiMo17-12-2 1.4404 182 166 152 137 127 118 113 108 103 100 98
XCrNiMoTi17-12-2 1.4571 202 185 177 167 157 145 140 135 131 129 127
X2CrNiMoN17-13-3 1.4429 260 211 185 167 155 145 140 135 131 129 127
X2CrNiMo17-12-3 1.4432 182 166 152 137 127 118 113 108 103 100 98
X3CrNiMo17-13-3 1.4436 195 177 162 147 137 127 120 115 112 110 108
X2CrNiMoN17-13-5 1.4439 260 225 200 185 175 165 155 150 --- --- ---
X2CrNiMo18-14-3 1.4435 180 165 150 137 127 119 113 108 103 100 98
X2CrNiMoCuWN25-7-4 1.4529 270 230 210 190 180 170 165 160 130 120 105
X2CrNiMo18-15-4 1.4438 200 172 157 147 137 127 120 115 112 110 108
X1CrNiMoCu25-20-5 1.4539 216 205 190 175 160 145 135 125 115 110 105
X1NiCrMoCu31-27-4 1.4563 210 190 175 160 155 150 145 135 125 120 115
X1CrNiMoCuN20-18-7 1.4547 267 230 205 190 180 170 165 160 153 148 ---
Grade Temperature in C
Elements No 50 100 150 200 250 300 350 400 450 500 550
X2CrNi18-9 1.4307 200 181 162 147 137 127 121 116 112 109 108
X2CrNiN18-10 1.4311 282 240 210 187 175 167 161 156 152 149 147
X2CrNi19-11 1.4306 200 181 162 147 137 127 121 116 112 109 108
X5CrNi18-10 1.4301 218 191 172 157 145 135 129 125 122 120 120
X6CrNiNb18-10 1.4550 232 211 196 186 177 167 161 156 152 149 147
X6CrNiTi18-10 1.4541 222 208 196 186 177 167 161 156 152 149 147
X2CrNiMo17-12-2 1.4404 217 199 181 167 157 145 139 135 130 128 127
XCrNiMoTi17-12-2 1.4571 232 218 206 196 186 175 169 164 160 158 157
X5CrNiMo17-12-2 1.4401 230 211 191 177 167 156 150 144 141 139 137
X2CrNiMo17-12-3 1.4432 217 199 181 167 157 145 139 135 130 128 127
X3CrNiMo17-13-3 1.4436 228 211 191 177 167 156 150 144 141 139 137
X2CrNiMoN17-13-3 1.4429 290 246 218 198 183 175 169 164 160 158 157
X2CrNiMo18-14-3 1.4435 217 200 180 165 153 145 139 135 130 128 127
X2CrNiMoCuWN25-7-4 1.4529 310 270 245 225 215 205 195 190 160 150 135
X2CrNiMo18-15-4 1.4438 232 206 188 177 167 156 148 144 140 138 136
X2CrNiMoN17-13-5 1.4439 290 255 230 210 200 190 180 175 --- --- ---
X1NiCrMoCu31-27-4 1.4563 240 220 205 190 185 180 175 165 155 150 145
X1CrNiMoCuN20-18-7 1.4547 306 270 245 225 212 200 195 190 184 180 ---
X1CrNiMoCu25-20-5 1.4539 244 235 220 205 190 175 165 155 145 140 135
Acero EN 10217 Round Pipes Grade
  • EN 10217-1 = P195TR1, P235TR2, P195TR2, P265TR2 P265TR2, P235TR1
  • EN10217-2 = P195GH, P265GH, P235GH, 16Mo3
  • EN 10217-6 = P265NL, P215NL
  • EN 10217-4 = P265NL, P215NL
  • EN 10217-7 = 1.4404, 1.4301
  • EN 10217-5 = P235GH, 16Mo3, P265GH
  • EN 10217-3 = P275NL1, P355NH, P355N, P460N
  • Bs EN 10217 Hot Rolled Pipes Uses
    • Paper Industries
    • Aerospace
    • Fertilizer Plant
    • Petrochemical Industries
    • Desalination Plant
    • Thermal & Nuclear Power Plants
    • Oil & Gas Exploration
    • Pharmaceutical Plant
    • Sugar Plants
    • Chemical Industries
    • Automobile Plants
    • Food & Dairy Plants
    Are you looking for Acero EN 10217 Tubes Specification, Composition, Wall Thickness and Weight Chart
    EN 10217-7 Chemical & Mechanical Composition
    Element No Carbon Silicon Manganese Phosphorus Sulfur Chromium Molybdenum Nickel Copper Nitrogen Others In10296-2?
    X2CrNi18-9 1.4307 0.030 1.00 2.00 0.045 0.015 17.5/19.5 - 8.0/10.0 - 0.11 - Yes
    X2CrNiN18-10 1.4311 0.030 1.00 2.00 0.045 0.015 17.0/19.5 - 8.5/11.5 - 0.12/0.22 - Yes
    X2CrNi19-11 1.4306 0.030 1.00 2.00 0.045 0.015 18.0/20.0 - 10.0/12.0 - 0.11 - Yes
    X5CrNi18-10 1.4301 0.07 1.00 2.00 0.045 0.015 17.0/19.5 - 8.0/10.5 - 0.11 - Yes
    X6CrNiNb18-10 1.4550 0.08 1.00 2.00 0.045 0.015 17.0/19.0 - 9.0/12.0 - - Nb 10xC/1.00 Yes
    X6CrNiTi18-10 1.4541 0.08 1.00 2.00 0.045 0.015 17.0/19.0 - 9.0/12.0 - - Ti 5xC/0.70 Yes
    X2CrNiMo17-12-2 1.4404 0.030 1.00 2.00 0.045 0.015 16.5/18.5 2.0/2.5 10.0/13.0 - 0.11 - Yes
    XCrNiMoTi17-12-2 1.4571 0.08 1.00 2.00 0.045 0.015 16.5/18.5 2.00/2.50 10.5/13.5 - - Ti 5xC/0.70 Yes
    X5CrNiMo17-12-2 1.4401 0.07 1.00 2.00 0.045 0.015 16.5/18.5 2.0/2.5 10.0/13.0 - 0.11 - Yes
    X2CrNiMo17-12-3 1.4432 0.030 1.00 2.00 0.045 0.015 16.5/18.5 2.50/3.00 10.5/13.0 - 0.11 - Yes
    X3CrNiMo17-13-3 1.4436 0.05 1.00 2.00 0.045 0.015 16.5/18.5 2.50/3.00 10.5/13.0 - 0.11 - Yes
    X2CrNiMoN17-13-3 1.4429 0.030 1.00 2.00 0.045 0.015 16.5/18.5 2.50/3.00 11.0/14.0 - 0.12/0.22 - Yes
    X2CrNiMo18-14-3 1.4435 0.030 1.00 2.00 0.045 0.015 17.0/19.0 2.50/3.00 12.5/15.0 - 0.11 - Yes
    X2CrNiMo18-15-4 1.4438 0.030 1.00 2.00 0.045 0.015 17.5/19.5 3.00/4.00 13.0/16.0 - 0.11 - No
    X1NiCrMoCuN25-20-7 1.4529 0.020 0.50 1.00 0.030 0.010 19.0/21.0 6.00/7.00 24.0/26.0 0.50/1.50 0.15/0.25 - No
    X2CrNiMoN17-13-5 1.4439 0.030 1.00 2.00 0.040 0.015 16.5/18.5 4.00/5.00 12.5/14.5 - 0.12/0.22 - Yes
    X1NiCrMoCu31-27-4 1.4563 0.020 0.70 2.00 0.030 0.010 26.0/28.0 3.00/4.00 30.0/32.0 0.70/1.50 0.11 - No
    X1CrNiMoCuN20-18-7 1.4547 0.020 0.70 1.00 0.030 0.010 19.5/20.5 6.00/7.00 17.5/18.5 0.50/1.00 0.18/0.25 - Yes
    X1CrNiMoCu25-20-5 1.4539 0.020 0.70 2.00 0.030 0.010 19.0/21.0 4.00/5.00 24.0/26.0 1.20/2.00 0.15 - Yes
    X2CrNiN23-4 1.4362 0.030 1.00 2.00 0.035 0.015 22.0/24.0 0.10/0.60 3.5/5.5 0.10/0.60 0.05/0.20 - Yes
    X2CrNiMoN25-7-4 1.4410 0.030 1.00 2.00 0.035 0.015 24.0/26.0 3.00/4.50 6.0/8.0 - 0.20/0.35 - Yes
    X2CrNiMoCuWN25-7-4 1.4501 0.030 1.00 1.00 0.035 0.015 24.0/26.0 3.00/4.00 6.0/8.0 0.50/1.00 0.20/0.30 W 0.50/1.00 No
    X2CrNiMoN22-5-3 1.4462 0.030 1.00 2.00 0.035 0.015 21.0/23.0 2.50/3.50 4.5/6.5 - 0.10/0.22 - Yes
    Tensile properties Impact properties
    grade Strength Tensile strength Elongation Minimum Avg
    Rp0.2 Rp1.0 Rm Minimum at RT at - temperature
    element No MPa MPa MPa long trans long trans trans
    X2CrNi18-9 1.4307 180 215 470-670 40 35 100 60 60
    X2CrNiN18-10 1.4311 270 305 550-760 35 30 100 60 60
    X2CrNi19-11 1.4306 180 215 460-680 40 35 100 60 60
    X5CrNi18-10 1.4301 195 230 500-700 40 35 100 60 60
    X6CrNiNb18-10 1.4550 205 240 510-740 35 30 100 60 60
    X6CrNiTi18-10 1.4541 200 235 500-730 35 30 100 60 60
    X2CrNiMo17-12-2 1.4404 190 225 490-690 40 30 100 60 60
    XCrNiMoTi17-12-2 1.4571 210 245 500-730 35 30 100 60 60
    X5CrNiMo17-12-2 1.4401 205 240 510-710 40 30 100 60 60
    X2CrNiMo17-12-3 1.4432 190 225 490-690 40 30 100 60 60
    X3CrNiMo17-13-3 1.4436 205 240 510-710 40 30 100 60 60
    X2CrNiMoN17-13-3 1.4429 295 330 580-800 35 30 100 60 60
    X2CrNiMo18-14-3 1.4435 190 225 490-690 40 30 100 60 60
    X2CrNiMo18-15-4 1.4438 220 250 490-690 35 30 100 60 60
    X2CrNiMoN17-13-5 1.4439 285 315 580-800 35 30 100 60 60
    X1NiCrMoCu31-27-4 1.4563 215 245 500-750 40 35 120 90 60
    X1CrNiMoCuN20-18-7 1.4547 300 340 650-850 35 30 100 60 60
    X1CrNiMoCu25-20-5 1.4539 220 250 520-720 35 30 120 90 60
    X1NiCrMoCuN25-20-7 1.4529 300 340 600-800 40 40 120 90 60
    X2CrNiMoN25-7-4 1.4410 550 ---- 800-1000 20 20 100 100 40
    X2CrNiN23-4 1.4362 400 ---- 600-820 25 25 120 90 40
    X2CrNiMoCuWN25-7-4 1.4501 550 ---- 800-1000 20 20 100 100 40
    X2CrNiMoN22-5-3 1.4462 450 ---- 700-920 25 20 120 90 40