EN 10219 S235 G2H Spiral Welded Piling Pipe

  • Home
  • Products
  • EN 10219 S235 G2H Spiral Welded Piling Pipe
EN 10219 S235 G2H Pipe

EN 10219 S235 G2H Pipe

S235 G2H Square Hollow Section

S235 G2H Square Hollow Section

S235 G2H Rectangular Structure Steel Tube

S235 G2H Rectangular Structure Steel Tube

EN 10219 S235 G2H Spiral Welded Piling Pipe for sale at best price in India


Check EN 10219 S235 G2H Tubing specification and dimensions, stockist of EN 10219 S235 G2H Welded Pipe

EN 10219 S235 G2H Pipe is a piling pipe made up of a carbon steel that has carbon, silicon, manganese, phosphorus, sulfur and niobium in the composition. The EN 10219 S235 G2H Spiral Welded Piling Pipe is welded from a coil of the same material grade. The spiral welding provides more strength and welded joints. The pipes have 235MPa minimum yield strength and 510MPa minimum tensile strength. The EN 10219 S235 G2H Tubing has 24% elongation rate at break and is tested at 20 degrees Celsius. The outer diameter of the pipes ranges from 21.3mm to 457.2mm with wall thickness ranging from 1.8mm to 14.27mm. The circular dimension range of the pipes is from 26.9mm to 323.9mm. The EN 10219 S235 G2H Welded Pipe is also available in square and rectangular dimensions. The square dimensions range from 25mm x 25mm to 300mm x 300mm. The length of the pipes range up to 18000mm. There are also different types of pipes such as seamless pipes, ERW pipes, LSAW pipes, SSAW pipes and casing and tubing pipes. The EN 10219 S235 G2H casing pipes are used to cover the internal tubing pipes and protect them from corrosion and abrasion. The S235 G2H Rectangular Structure Steel Tube is used to increase the strength of a structural application. The low weight to high strength ratio of the S235 G2H Square Hollow Section helps to maintain a balance between light weight and strength in applications. We are one of the supplier who provide cut to length pipe in all Grades which saves your cost. Rexal tubes is a EN 10219 S235 G2H Tubing supplier who stocks pipes and Tubes in all surface finish.

Sizes of EN 10219 S235 G2H Pipe
  • Outer Diameter in MM: 6 To 610
  • Wall Thickness in Mm: 4 To 22
  • Length in Meter: 0.5 To 22

one of the largest S235 G2h Rectangular Structure Steel Tube manufacturer and Supplier in India

What are the types of EN 10219 S235 G2H Tubing?
EN 10219 S235 G2h Spiral Welded Piling Pipe

EN 10219 S235 G2h Spiral Welded Piling Pipes

EN10219 S235 Straight Seam Welded Pipe

EN10219 S235 Straight Seam Welded Pipes

S235 G2h Galvanized Steel Pipe

S235 G2h Galvanized Steel Pipes

EN 10219 S235 G2h Seamless Pipe

EN 10219 S235 G2h Seamless Pipes

EN 10219 S235 G2h Hot Rolled Welded Tube

EN 10219 S235 G2h Hot Rolled Welded Tube

EN 10219 S235 G2h Erw Pipe

EN 10219 S235 G2h Erw Pipes

EN 10219 S235 G2H Welded Pipe Coating
  • External Coating and Wrapping to international standards such as AWWA, BS, JIS
  • Coal tar epoxy coating
  • Coal tar enamel and Bitumen
  • Polyurethane coating
  • Polyethylene tape wrapping

Internal Coating and Lining conforming to AWWA, JIS, BS

  • Liquid epoxy coating
  • others
  • Cement lining
Check S235 G2H Square Hollow Section sizes, Specifcation and dimensions
S235 G2H Rectangular Structure Steel Tube Specification Chart
Standard No EN 10219 S235
Outside Diameter in MM 21.3 To 457.2
Wall Thickness in MM 1.8 To 14.27
Circular Dimension Range in MM 26.9 To 323.9
Square Dimension Range in MM 25*25 To 300*300
Rectangular Dimension Range in MM 40*20 to 400*200
Pipe Marking All Pipe are marked as follows: Supplier or Manufacturer’s Name, Standard, Grade, OD, Thickness, Length, Heat Number
Length in Mm 6000 To 12 000/18 000
Grade S235G2H
Supplier & Distributors Located in Bangalore, Sydney, Calgary, Ankara, Ernakulam, Karachi, Chennai, Kolkata, Baroda, Istanbul, London, Melbourne, Courbevoie, Tehran, Port of Spain, Muscat, Nagpur, Indore, Lagos, Vadodara, Gujarat, Bengaluru, Bogota, Montreal, Tau, India, Perth, Abu Dhabi, Ahvaz, Gurgaon, New Delhi, Hyderabad, Janeiro, Mumbai, Riyadh, Ludhiana, Gimhae si, Mexico, Caracas, Surat, Ludhiana, Khobar, Noida, Howrah, Santiago, Pimpri Chinchwad, Manama, Ahmedabad, Jamshedpur, Coimbatore, Thiruvananthapuram, Ranchi, Kuwait, Kanpur, Dammam, Rajkot
Special price offer on Grade S235 G2H Seamless and ERW Pipes in Mumbai, India, Manufacturer and Supplier EN 10219 S235 G2H Pipe
S235 G2H Square Hollow Section Uses
  • Fossil Fuel Power Plants
  • Marine Applications
  • Paper & Pulp
  • Refineries
  • Heat Exchangers
  • Condensers
  • Boilers
  • Nuclear Power
  • Ship Building
  • Power Plants
Testing Facilities of Carbon Steel S235 ERW Pipe
  • Chemical Component Analysis
  • Technical Properties
  • Mechanical Properties
  • Exterior Size Inspection
S235 G2H Rectangular Structure Steel Pipe Sizes
1/8 Inch IPS(.405 Inch Outer Diameter) 3 1/2 Inch IPS( 4.000 Inch Outer Diameter)
3/8 Inch IPS(.675 Inch Outer Diameter) 5 Inch IPS( 5.563 Inch Outer Diameter)
Schedule 40, 80 Schedule 10, 40, 80, 160, XXH
1/4 Inch IPS(.540 Inch Outer Diameter) 4 Inch IPS(4.500 Inch Outer Diameter)
Schedule 10, 40, 80 Schedule 10, 40, 80, 160, XXH
Schedule 10, 40, 80, 160, XXH Schedule-40 (.375)
Schedule 10, 40, 80 Schedule 10, 40, 80, 160, XXH
1/2 Inch IPS(.840 Inch Outer Diameter) 6 Inch IPS(6.625 Inch Outer Diameter)
Schedule 5, 10, 40, 80, 160, XXH Schedule 5, 10, 40, 80, 120, 160, XXH
3/4 Inch IPS(1.050 Inch Outer Diameter) 8 ” IPS(8.625 Inch Outer Diameter)
Schedule 10, 40, 80, 160, XXH Schedule 5, 10, 40, 80, 120, 160, XXH
1 Inch IPS:(1.315′ Outer Diameter) 10 Inch IPS(10.750 Inch Outer Diameter)
Schedule 5, 10, 40, 80, 160, XXH Schedule 10, 20, 40, 80 (.500), TRUE 80(.500)
2 Inch IPS(2.375 Inch Outer Diameter) 16 Inch IPS(16.000 Inch Outer Diameter)
1-1/4 Inch IPS(1.660 Inch Outer Diameter) 12 Inch IPS(12.750 Inch Outer Diameter)
1-1/2 Inch IPS(1.900 Inch Outer Diameter) 14 Inch IPS(14.000 Inch Outer Diameter)
Schedule 10, 40, 80, 160, XXH Schedule10 (.188), Schedule40 (.375)
Schedule 10, 40, 80, 160, XXH Schedule 10, 20, 40(.375), TRUE40(.406), Schedule80(.500)
Schedule 10, 40, 80, 160, XXH Schedule10(.188), Schedule40(.375)
2 1/2 Inch IPS(2.875 Inch Outer Diameter) 18 Inch IPS (18.000 Inch Outer Diameter)
3 Inch IPS( 3.500 Inch Outer Diameter) Schedule 5, 10, 40, 80, 160, XXH
S235 G2H Square Hollow Section Size Chart
Wall Thickness Outer Diameter Sizes in Inch
.010 1/16, 1/8, 3/16
.020 1/16, 1/8, 3/16, 1/4, 5/16, 3/8
.120 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 2, 2 1/4, 2 1/2, 3
.083 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 1 7/8, 2, 2 1/2,3
.012 1/8
.016 1/8, 3/16
.028 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 3/4, 1, 1 1/2, 2
.035 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 2, 2 1/4
.134 1
.049 3/16, 1/4, 5/16, 3/8, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/8, 1 1/4, 1 1/2, 1 5/8, 2, 2 1/4
.065 1/4, 5/16, 3/8, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 1 3/4, 2, 2 1/2, 3
.095 1/2, 5/8, 1, 1 1/4, 1 1/2, 2
.109 1/2, 3/4, 1, 1 1/4, 1 1/2, 2
.250 3
.125 3/4, 1, 1 1/4, 1 1/2, 2, 3, 3 1/4
.375 3 1/2