EN 10219 S355JRH Structural Steel Pipe

  • Home
  • Products
  • EN 10219 S355JRH Structural Steel Pipe
EN 10219 S355JRH Welded Steel Pipe

EN 10219 S355JRH Welded Steel Pipe

S355JRH Hollow Section

S355JRH Hollow Section

EN 10219 S355JRH LSAW Welded Steel Pipe

EN 10219 S355JRH LSAW Welded Steel Pipe

EN 10219 S355JRH LSAW Welded Steel Pipe manufacturer in india


We stock and produce EN 10219 S355JRH LSAW Pipes in various shapes

EN 10219 S355JRH Welded Steel Pipe is made from a carbon steel that has carbon, silicon, manganese, phosphorus, sulfur and niobium in the composition. The mild carbon steel has different dimensions for different grades. The Structural Steel Pipe EN 10219 S355JRH grade pipes have outside diameters ranging from 21.3mm to 457.2mm and the wall thicknesses ranging from 1.8mm to 14.27mm. The circular dimensions of the pipes range from 26.9mm to 323.9mm. There are round pipes, square pipes, rectangular pipes and tubes in this grade. The pipes could be welded or seamless in production. The EN 10219 S355JRH LSAW Welded Steel Pipe is welded from sheets and plates of the same material grade. The welded square pipes have dimensions ranging from 25x25mm to 300x300mm. The length of the pipes ranges from 6000mm to 18000mm as single random, double random and custom cut to length sizes. The material also has minimum yield strength of 355MPa and up to 680MPa minimum tensile strength with 20% elongation at break. The S355JRH Hollow Section is a good selection for applications where structural elements are needed but the weight has to be reduced. The square hollow section provides extra strength with the shape. The EN 10219 S355JRH can come with different pipe ends and different coating options. The coating can prevent corrosion and increase the wear and tear resistance.

Structural Steel Pipe EN 10219 S355JRH Types
En10219 Standard S355jrh Material Shs Rhs Steel Tube

En10219 Standard S355jrh Material Shs Rhs Steel Tube

EN 10219 Carbon Steel Pipe S355JRH 2000*20*6000mm Oiled

EN 10219 Carbon Steel Pipe S355JRH 2000*20*6000mm Oiled

EN 10219 S355jrh LSAW Pipe

EN 10219 S355jrh LSAW Pipe

EN10219 S355JRH Mild Carbon Steel Pipe

EN10219 S355JRH Mild Carbon Steel Pipe

EN10219 S355JRH Seamless Pipe

EN10219 S355JRH Seamless Pipe

EN10219 S355JRH Welded and ERW Tubes

EN10219 S355JRH Welded and ERW Tubes

Are you searching for Structural Steel Pipe EN 10219 S355JRH Specification ? find here Grade S355JRH Seamless Pipes complete information

EN 10219 S355JRH Welded Steel Pipe Specification Standard
Standard ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB
Outer Dimensions 4.0mm – 60.0mm
size 5.0 - 1219.2 mm
Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
Schedule SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Length Single Random, Double Random, Standard & Cut length Pipe
Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc
Form are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc.
Types Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW din 2391 st35 pipe
End Plain End, Beveled End, Treaded Pipe, Screwed ends
Application Dairy Pipe, Oil Pipe, Gas Pipe, Fluid Pipe, Boiler Pipe for Chemical Industry
Value Added Service Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc.
manufacturing Technique Cold drawn, hot drawn, bright annealed, solid solution, hot extruding
Test Certificate Manufacturer Test Certificate
Laboratory Test Certificate from Govt. Approved Lab.
Under Third Party Inspection
Material Test Certificates (MTC) Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Heat Treatment Charts, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP)
EN 10219 S355JRH LSAW Welded Steel Pipe Application
  • Power Plants
  • Boilers
  • Ship Building
  • Heat Exchangers
  • Condensers
  • Paper & Pulp
  • Marine Applications
see Stal S355JRH Hollow Section and S355JRH+N ERW Tubes Properties
S355JRH Hollow Section Chemical Composition
Steel Grade Type of deoxidation % by mass, maximum
steel name steel number C SI Mn P S Nb
S235JRH 1.0039 FF 0.17 1.4 0.04 0.04 0.009
EN 10219 S355JRH  Mechanical Properties Table
Steel Grade Minimum Yield Strength MPa Tensile Strength MPa Elongation Impact Energy
Steel name Steel number thickness(mm) thickness(mm) % (min) (KV J) (min)
 ≤ 16 16> to ≤40  ≤3 > 3 ≤40 ≤40 mm test temperature
S235JRH 1.0039 235 225 360-510 360-510 24 20℃
Check Price List and Testing of EN 10219 S355JRH Square Tubing
Stal S355JRH ERW Pipe Testing
  • Mechanical Testing Such as Tensile, Elongation, Reduction of Area
  • Micro Test
  • Macro Test
  • Hardness Test
  • Pitting Resistance Test
  • Intergranular Corrosion (IGC) Test
  • Flaring Test
  • Flattening Test
  • Hydrostatic Test
  • Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
  • Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
  • Radiography Test
EN 10219 S355JRH Square Tubing Surface Finish

Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer’s requirement