EN 10305-1 Grade E355 Seamless Tubes
EN 10305-1 E355 Carbon Steel Pipes
E355+sr Din En 10305-1 Tube
EN 10305-1 E355 Carbon Steel Pipes supplier
Table of contents
- EN 10305-1 E355 Carbon Steel Pipes Mechanical Properties
- Different Types of EN 10305-1 E355 Carbon Steel Tube
- Chemical Composition of En 10305-1 Steel Tubes
- Din En 10305-1 Pipe Material Size Chart
- Equivalent of E355+sr Din En 10305-1 Tube
- Acier E355 Welded Tube Size
- E355 Steel Round Tube Dimension Tolerance
- Dimensional Length of E355 Steel Seamless Pipe
- Specification chart of Acero E355 Seamless Tubes
- Inspection of Stahl E355 Tubing
Acier E355 Welded Pipe and Stahl E355 Tubing sizes available from 6 -20 NPS
EN 10305-1 E355 Carbon Steel Pipes Mechanical Properties
| Tensile Strength | Elongation | ||
|---|---|---|---|
| MPa Minimum | MPa Minimum | ksi Minimum | Percentage |
| 340 | 480 | – | 25 |
| 490 | 630 | – | 22 |
| 440 | 570 | – | 21 |
| – | – | – | – |
| 460 | - | - | 21 |
| 540 | - | - | 18 |
| 550 | 700 | - | 22 |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| 290 | 430 | - | 30 |
| 350 | 480 | - | 25 |
| 490 | 630 | - | 22 |
Different Types of EN 10305-1 E355 Carbon Steel Tube
EN 10305-1 Seamless honed precision steel tube
Cold drawn seamless steel tube DIN EN 10305-1
EN 10305-1 DIN 1630 OD 14inch Seamless cold drawn pipe with 6m length
EN 10305-1 E215 E235 E255 E355 OD 2mm - 60mm Pipe
Cold Drawn EN 10305-1 E355 1.0580 Steel Tube
Cold drawn seamless steel tubes EN 10305-1 E235+N
EN 10305-1 schedule 80 carbon seamless steel pipe
DIN EN 10305-1 s45c seamless cold drawn tubes
EN 10305-1 Seamless precision steel tube
Manufacturers of EN 10305-1 E355 Carbon Steel Tube. Check Properties of En 10305-1 Steel Tubes
Chemical Composition of En 10305-1 Steel Tubes
| Carbon | Silicon | Manganese | Phosphorous | Sulphur | Molybdenum | Nickel | Chromium | Copper | Others |
|---|---|---|---|---|---|---|---|---|---|
| maximum 0.17 | maximum 0.35 | maximum 1.20 | 0.025 | 0.025 | – | – | – | – | – |
| maximum 0.22 | maximum 0.55 | maximum 1.60 | 0.025 | 0.025 | – | – | – | – | – |
| maximum 0.21 | maximum 0.35 | 0.40-1.10 | 0.025 | 0.025 | – | – | – | – | – |
| 0.20-0.30 | maximum 0.40 | 1.20-1.50 | 0.035 | 0.035 | – | – | – | – | – |
| 0.32-0.39 | maximum 0.40 | 0.50-0.80 | 0.035 | 0.035 | maximum 0.10 | – | maximum 0.40 | – | – |
| 0.42-0.55 | maximum 0.40 | 0.50-0.80 | 0.035 | 0.035 | maximum 0.10 | – | maximum 0.40 | – | – |
| 0.16-0.22 | 0.10-0.50 | 1.30-1.70 | 0.03 | 0.035 | – | – | – | – | V0.08-0.15 |
| 0.22-0.29 | maximum 0.40 | maximum 1.50 | 0.035 | 0.035 | 0.15-0.25 | maximum 0.40 | – | – | – |
| 0.22-0.29 | maximum 0.40 | 0.60-0.90 | 0.035 | 0.035 | 0.15-0.30 | maximum 0.40 | 0.90-1.20 | – | – |
| 0.38-0.45 | maximum 0.40 | 0.60-0.90 | 0.035 | 0.035 | 0.15-0.30 | – | 0.90-1.20 | – | – |
| maximum 0.10 | maximum 0.05 | maximum 0.70 | 0.025 | 0.015 | – | – | – | – | Al min 0.025 |
| maximum 0.17 | maximum 0.35 | maximum 1.20 | 0.025 | 0.015 | – | – | – | – | – |
| maximum 0.22 | maximum 0.55 | maximum 1.60 | 0.025 | 0.015 | – | – | – | – | – |
Din En 10305-1 Material Pipe Size Chart
| 1/8 Inch IPS(.405 Inch Outer Diameter) | 3 1/2 Inch IPS( 4.000 Inch Outer Diameter) |
| 3/8 Inch IPS(.675 Inch Outer Diameter) | 5 Inch IPS( 5.563 Inch Outer Diameter) |
| Schedule 40, 80 | Schedule 10, 40, 80, 160, XXH |
| 1/4 Inch IPS(.540 Inch Outer Diameter) | 4 Inch IPS(4.500 Inch Outer Diameter) |
| Schedule 10, 40, 80 | Schedule 10, 40, 80, 160, XXH |
| Schedule 10, 40, 80, 160, XXH | Schedule-40 (.375) |
| Schedule 10, 40, 80 | Schedule 10, 40, 80, 160, XXH |
| 1/2 Inch IPS(.840 Inch Outer Diameter) | 6 Inch IPS(6.625 Inch Outer Diameter) |
| Schedule 5, 10, 40, 80, 160, XXH | Schedule 5, 10, 40, 80, 120, 160, XXH |
| 3/4 Inch IPS(1.050 Inch Outer Diameter) | 8 ” IPS(8.625 Inch Outer Diameter) |
| Schedule 10, 40, 80, 160, XXH | Schedule 5, 10, 40, 80, 120, 160, XXH |
| 1 Inch IPS:(1.315′ Outer Diameter) | 10 Inch IPS(10.750 Inch Outer Diameter) |
| Schedule 5, 10, 40, 80, 160, XXH | Schedule 10, 20, 40, 80 (.500), TRUE 80(.500) |
| 2 Inch IPS(2.375 Inch Outer Diameter) | 16 Inch IPS(16.000 Inch Outer Diameter) |
| 1-1/4 Inch IPS(1.660 Inch Outer Diameter) | 12 Inch IPS(12.750 Inch Outer Diameter) |
| 1-1/2 Inch IPS(1.900 Inch Outer Diameter) | 14 Inch IPS(14.000 Inch Outer Diameter) |
| Schedule 10, 40, 80, 160, XXH | Schedule10 (.188), Schedule40 (.375) |
| Schedule 10, 40, 80, 160, XXH | Schedule 10, 20, 40(.375), TRUE40(.406), Schedule80(.500) |
| Schedule 10, 40, 80, 160, XXH | Schedule10(.188), Schedule40(.375) |
| 2 1/2 Inch IPS(2.875 Inch Outer Diameter) | 18 Inch IPS (18.000 Inch Outer Diameter) |
| 3 Inch IPS( 3.500 Inch Outer Diameter) | Schedule 5, 10, 40, 80, 160, XXH |
Equivalent of E355+sr Din En 10305-1 Tube
| Product | Deutsches Institut für Normung | European Standards | British Standards | National Futures Association | American Society for Testing and Material | American Society Of Mechanical Engineers |
|---|---|---|---|---|---|---|
| EN 10305-1 E235 | – | EN 10305-1 E235 | – | – | – | – |
| EN 10305-4 E355 | – | EN 10305-4 E355 | – | – | – | – |
| EN 10305-1 E355 | – | EN 10305-1 E355 | – | – | – | – |
| EN 10305-1 26Mn5 | DIN 26Mn5 | EN 10305-1 26Mn5 | – | ASTM SAE 1526 | – | – |
| EN 10305-1 E255 | – | EN 10305-1 E255 | – | – | – | – |
| EN 10305-1 C35E | DIN 17204 Ck35 | EN 10305-1 C35E | NFA A 35-552 XC 32 | ASTM A519 1035 | ASME SA 519 1035 | – |
| EN 10305-1 E41020V1 | – | EN 10305-1 E41020V1 | – | – | – | – |
| EN 10305-1 C45E | DIN 17204 Ck45 | EN 10305-1 C45E | – | ASTM A519 1045 | ASME SA 519 1045 | – |
| EN 10305-1 26Mo2 | – | EN 10305-1 26Mo2 | – | – | – | – |
| EN 10305-1 42CrMo4 | DIN 17204 42CrMo4 | EN 10305-1 42CrMo4 | NFA EN – 42CrMo4 | ASTM A 519 4142 | – | – |
| EN 10305-1 25CrMo4 | DIN 17200 25CrMo4 | EN 10305-1 25CrMo4 | NFA EN . 25CrMo4 | – | – | – |
| EN 10305-4 E235 | – | EN 10305-4 E235 | – | – | – | – |
| EN 10305-4 E215 | – | EN 10305-4 E215 | – | – | – | – |
Best price of E355+sr Din En 10305-1 Tube and E355 Steel Seamless Pipe ex Mumbai, India
Acier E355 Welded Tube Size
| Wall Thickness | Outer Diameter Sizes in Inch |
|---|---|
| .010 | 1/16, 1/8, 3/16 |
| .020 | 1/16, 1/8, 3/16, 1/4, 5/16, 3/8 |
| .120 | 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 2, 2 1/4, 2 1/2, 3 |
| .083 | 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 1 7/8, 2, 2 1/2,3 |
| .012 | 1/8 |
| .016 | 1/8, 3/16 |
| .028 | 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 3/4, 1, 1 1/2, 2 |
| .035 | 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 2, 2 1/4 |
| .134 | 1 |
| .049 | 3/16, 1/4, 5/16, 3/8, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/8, 1 1/4, 1 1/2, 1 5/8, 2, 2 1/4 |
| .065 | 1/4, 5/16, 3/8, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 1 3/4, 2, 2 1/2, 3 |
| .095 | 1/2, 5/8, 1, 1 1/4, 1 1/2, 2 |
| .109 | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 |
| .250 | 3 |
| .125 | 3/4, 1, 1 1/4, 1 1/2, 2, 3, 3 1/4 |
| .375 | 3 1/2 |
E355 Steel Round Tube Dimension Tolerance
| Grade | Sizes | Outer Diameter Tolerance | Tolerance |
|---|---|---|---|
| Hot rolled | Outer Diameter – 80 Outer Diameter > 80 WT < 12 Wall = 12 | ± 0.4 ± 0.5 % of Outer Diameter | ± 0.7 ± (5 % x WT + 0.1 |
| Cold Worked, cold rolled and cold drawn | Outer Diameter < 40 Outer Diameter 40 - 80 Outer Diameter > 80 WT < 6 WT 6 = 8 WT > 8 | + 0.30/- 0 *+ 0.35/- 0 *+ 0.40/- 0 | ± 0.30 ± 0.35 ± 0.40 |
| Hot rolled peeled tube | All sizes WT < 12 Wall = 12 | + 0.25/- 0 mm | ± 0.8 ± (5 % x WT+ 0.2) |
Dimensional Length of E355 Steel Seamless Pipe
| Component length in MM | Outer Diameter 30 To 100 in MM | Outer Diameter 100 To 254 in MM |
| 10 To 100 | + 1.0/- 0 | + 2.0/- 0 |
| 1200 To 5000 | + 5.0/- 0 | + 6.0/- 0 |
| 600 To 1200 | + 3.0/- 0 | + 4.0/- 0 |
| 100 To 600 | + 2.0/- 0 | + 3.0/- 0 |
Check Specification of Din En 10305-1 Material and Acero e355+n ERW/ Round Tubes
Specification chart of Acero E355 Seamless Tubes
| size in Mm | 5 To 1219.2 |
|---|---|
| Schedule | Schedule XS, Schedule 160, Schedule 40, Schedule XXS, Schedule 80 Supplier and Manufacturer |
| Standard | JIS, EN, DIN, GB, IS, AISI, ASME, ASTM |
| Seamless Pipe Size in MM | 4 to 219 Wall thickness: 0.5 to 20 |
| Welded Pipe Size in MM | 5 to 1219.2 |
| Seamless Tube Size in MM | 3.35 To 101.6 |
| Length | Double Random, Single Random, Standard & Cut length |
| Wall Thickness in inch | 0.020 to 0.220 |
| Type | U bent, Straight, Seamless, Round, Welded, EFW, Tube Coil, ERW, Hydraulic, LSAW, Square, Fabricated, Boiler, Rectangular |
| Finish | BA, Polished, AP, MF |
| Form | Square, Hydraulic, Rectangular, Clad, U bent, Boiler, Hollow, LSAW, Straight, Round, |
| End | Beveled, Plain, Treaded |
| Pipe Marking | All Pipes are marked as follows: Supplier or Manufacturer’s Name, Standard, Grade, OD, Thickness, Length, Heat Number |
Inspection of Stahl E355 Tubing
| Optional | Flattening test or expansion test (option 20) | M | One per tested batch |
| Roughness measurement | Not applicable | One per tested batch | |
| NDT in order to identify longitudinal discontinuity | Not applicable | Individual | |
| NDT in order to identify leaks | |||
| Mandatory | Chemical analysis | M | M |
| Tensile testing | M | One per tested batch | |
| Dimension verification | M | M | |
| Visual inspection | M | M |
| Inspection or test types | Test frequency | |
| Internal test | Acceptance test | |
| Dimension verification | M | M |
| Chemical analysis | M | M |
| NDT in order to identify leaks | Individual | Individual |
| Tensile testing | M | One per tested batch |
| Visual inspection | M | M |
| Flattening test or extension test | M | Two per tested batch |