IS 1161 ERW Pipe

  • Home
  • Products
  • IS 1161 ERW Pipe
IS 1161 Pipe

IS 1161 Pipe

YST 310 / 210 / 355 Steel Seamless Tube

IS 1161 grade YST 310 / 210 / 355 Steel Seamless Tube

IS 1161 ERW Pipe

IS 1161 ERW Pipe

IS 1161 ERW Pipe, IS 1161 Grade YST 210 Steel Tubes Manufacturer


Refer IS 1161 YST 310 Seamless Pipes weight Chart, Check IS 1161 Pipe price list in Mumbai, India

IS 1161 ERW Pipe is electric resistant welded carbon steel pipe that has carbon, manganese, phosphorus, sulfur and silicon in the composition.  there are different grades in the specification such as IS 1161 YST 210 / 310 / 355 Pipes each denoted by the minimum yield strength of the pipes respectively as 210MPa, 310MPa and 355MPa. The pipes range in diameters differently for seamless and welded pipes and for tubes. The IS 1161 Carbon Steel Tubes range from 3.35mm to 101.6mm for seamless tubes and up to 152mm for welded tubes. The diameter of the seamless pipes range from 4mm to 219mm and the welded pipes range from 5mm to 1219.2mm. The IS 1161 YST 22 also come in wall thicknesses ranging from 0.5mm to 20mm and schedules ranging from sch20 through XXS and heavier pipes. The IS 1161 Grade YST 210 Seamless Pipes have less absolute roughness and are accurate in dimensions. These can be used in the equipment, tools, instruments and dimensionally sensitive applications. The IS 1161 YST 355 pipes come with plain ends, beveled ends and coupling end tryps. The tubes and pipes can be round, rectangular or hydraulic. The IS 1161 YST 210 Welded Pipes do not require preheating before welding. They also do not require post weld heat treatment.

IS 1161 Material Specification
SPEC OUT SIDE DIAMETER WALL

THICKNESS

WEIGHT LENGTH
PIPE BODY PIPE END

IS:1161

Upto 48.3mm OD
+ 0.4mm, -0.8mm
Over 48.3mm ± 1.0%
N.A. -10%, + not limited Carload 10 MT Light ± 5%, M & H ±
7.5% Single Tube Light -8% + 10%
Med & Heavy ± 10%

NORMAL

Avg. (MIN)

MINIMUM

MAXIMUM

ft

mtr

ft

mtr

ft

mtr

ft

mtr

6.0

4.0

7.0

IS 1161 Erw Pipe Types
IS 1161 YST 310 seamless boiler tube

IS 1161 YST 310 seamless boiler tube

IS 1161 YST 210 200x100 tubes

IS 1161 YST 210 200x100 tubes

Seamless IS 1161 YST 210 Steel Pipes Tubes

Seamless IS 1161 YST 210 Steel Pipes Tubes

IS 1161 YST 210 9 inch carbon steel pipes

IS 1161 YST 210 9 inch carbon steel pipes

IS 1161 YST 355 15 Inch Seamless Steel Pipe

IS 1161 YST 355 15 Inch Seamless Steel Pipe

IS 1161 YST 310 24 inch steel pipes

IS 1161 YST 310 24 inch steel pipes

5 inch IS 1161 YST 210 steel pipe

5 inch IS 1161 YST 210 steel pipe

IS 1161 YST 355 alloy steel pipes

IS 1161 YST 355 alloy steel pipes

IS 1161 YST 310 steel pipe 1/2 to 8 inch

IS 1161 YST 310 steel pipe 1/2 to 8 inch

Buy IS 1161 YST 22 carbon steel CDS tubes at a low price, Check IS 1161 grade YST 310 Hot Finished Welded Tube Dimension & Thickness

IS 1161 Pipe Thickness Chart
IS 1161 Pipe Types Out diameter Wall thickness Length
IS 1161 ERW Pipe (Custom Sizes) 1/2″ NB – 24″ NB As per requirement Custom
IS 1161 SAW Pipe 16″ NB – 100″ NB As per requirement Custom
IS 1161 Seamless Pipe (Custom Sizes) 1/2″ NB – 60″ NB SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 Custom
IS 1161 Welded Pipe (in Stock + Custom Sizes) 1/2″ NB – 24″ NB As per requirement Custom
Properties of IS 1161 YST 210 / 310 / 355 Pipes

IS 1161 Yst 240 Chemical Composition

Chemical Composition (%) Max.

Mechanical Properties

Impact

Energy

Specification Grade C Mn P S Si C.E. Yield Strength Tensile Strength % Elongation

J (Ft.lb)

PCM IIW Min Max Min

Max

e (min)

(min.)

PSI MPa PSI MPa PSI

MPa

PSI

MPa

IS:1161 YST-210

0.12

0.60

0.040

0.040

210

330

Distance between plates
YST-240

0.16

1.20

0.040

0.040

240

410

Forweld-75%, 85%, 85%
YST-310

0.25

1.30

0.040

0.040

0.45

310

450

For parent- 60%, 75%,
GL= 5.65 Area 75% N.A.
Uses of IS 1161 Carbon Steel Tubes
  • Structural Supports
  • Columns
  • Road Bore Casings
  • Pilings
  • Slurry Lines
  • Sign Poles
  • Dredge Pipe
  • Tower Construction
  • Roadway Billboard Signs
  • Caissons
  • Bollards
  • Dock Piles
IS 1161 Equivalent Grade
IS 1161 material specification & equivalent grades
IS 1161 yst 355 IS 1161 yst 355 Tata Structura 355 DIN: 2440, 2441, BS: 1387, S: 3589, 1239 ISO: 65
Weight Chart of IS 1161 YST 22
Size NPS Pipe O.D. Wall Thickness Pipe I.D. Weight per Foot Standard to XXHY Schedule
Pipe #
Section Modulus Gallon Capacity Per Linear Foot
1/2 0.84 0.109 0.622 0.85 STD 40 .0407 .0158
0.147 0.546 1.09 XHY 80 .0478 .0122
0.188 0.464 1.31 160 .0528 .0088
0.294 0.252 1.72 XXHY .0577 .0026
3/4 1.05 0.113 0.824 1.13 STD 40 .0705 .0277
0.154 0.742 1.48 XHY 80 .0853 .0225
0.219 0.612 1.95 160 .1006 .0153
0.308 0.434 2.44 XXHY .1103 .0077
1 1.315 0.133 1.049 1.68 STD 40 .1328 .0449
0.179 0.957 2.17 XHY 80 .1606 .0374
0.250 0.815 2.85 160 .1904 .0271
0.358 0.599 3.66 XXHY .2136 .0146
1 1/4 1.66 0.140 1.380 2.27 STD 40 .2346 .0777
0.191 1.278 3.00 XHY 80 .2913 .0666
0.250 1.160 3.77 160 .3421 .0549
0.382 0.896 5.22 .4110 .0328
1 1/2 1.90 0.145 1.610 2.72 STD 40 .3262 .1058
0.200 1.500 3.63 XHY 80 .4118 .0918
0.281 1.338 4.86 160 .5079 .0730
0.400 1.100 6.41 .5977 .0494
2 2.375 0.109 2.157 2.64 10 .4205 .1898
0.154 2.067 3.66 STD 40 .5606 .1743
0.218 1.939 5.03 XHY 80 .7309 .1534
0.250 1.875 5.68 .8045 .1434
0.281 1.813 6.29 .8666 .1344
0.344 1.687 7.47 160 .9806 .1161
0.436 1.503 9.04 XXHY 1.1043 .0922
2 1/2 2.875 0.120 2.635 3.53 10 .6870 .2833
0.203 2.469 5.80 STD. 40 1.0640 .2487
0.216 2.443 6.14 1.1169 .2435
0.250 2.375 7.02 1.2468 .2301
0.276 2.323 7.67 XHY 80 1.3386 .2202
0.375 2.125 10.02 160 1.6371 .1842
0.552 1.771 13.71 XXXHY 1.9971 .1280
3 3.50 0.120 3.260 4.34 1.0411 .4336
0.156 3.188 5.58 1.3122 .4147
0.172 3.156 6.12 1.4265 .4064
0.188 3.124 6.66 1.5342 .3984
0.216 3.068 7.58 STD. 40 1.7241 .3840
0.250 3.000 8.69 1.9372 .3672
0.281 2.938 9.67 2.1207 .3521
0.300 2.900 10.26 XHY 80 2.2253 .3431
0.438 2.624 14.34 160 2.8774 .2811
0.600 2.300 18.6 XXHY 3.4243 .2158
3 1/2 4.0 0.120 3.760 4.98 10 1.3776 .5768
0.226 3.548 9.12 STD. 140 2.3939 .5136
0.250 3.500 10.02 2.6001 .4998
0.281 3.438 11.17 2.8562 .4821
0.318 3.364 12.52 XHY 80 3.1400 .4617
0.636 2..728 22.87 XXHY 4.8795 .3085
4 4.5 0.120 4.260 5.62 10 1.7612 .7404
0.156 4.188 7.24 2.2354 .7156
0.188 4.124 8.67 2.6296 .6942
0.203 4.094 9.32 2.8173 .6838
0.219 4.062 10.02 3.0184 .6725
0.237 4.026 10.80 STD. 40 3.2145 .6613
0.250 4.000 11.36 3.3611 .6528
0.281 3.938 12.67 60 3.7021 .6326
0.312 3.876 13.97 4.0273 .6126
0.337 3.826 15.00 XHY 80 4.2713 .5972
0.438 3.624 19.02 120 5.1790 .5361
0.531 3.438 22.53 160 5.8997 .4822
0.674 3.152 27.57 XXHY 6.7927 .4054
5 5.563 0.188 5.187 10.80 4.1161 1.0979
0.219 5.125 12.51 4.7279 1.0716
0.258 5.047 14.63 STD. 40 5.4500 1.0391
0.281 5.001 15.87 5.8644 1.0204
0.312 4.939 17.51 6.4074 .99647
0.344 4.875 19.19 6.9358 .9696
0.375 4.813 20.80 XHY 80 7.4300 .9449
0.500 4.563 27.06 120 9.2534 .8495
0.625 4.313 32.99 160 10.7976 .7590
0.750 4.063 38.59 XXHY 12.0954 .6734
6 6.625 0.109 6.407 7.59 5 3.5769 1.6748
0.134 6.357 9.30 10 4.3475 1.6488
0.156 6.313 10.79 5.0107 1.6260
0.188 6.249 12.94 5.9351 1.5937
0.203 6.219 13.94 6.3804 1.5780
0.219 6.187 15.00 6.8261 1.5620
0.250 6.125 17.04 7.6905 1.5306
0.280 6.065 18.99 STD. 40 8.4958 1.5008
0.312 6.001 21.06 9.3416 1.4688
0.344 5.937 23.10 10.111 1.4391
0.375 5.875 25.05 10.893 1.4082
0.432 5.761 28.60 XHY 80 12.224 1.3541
0.500 5.625 32.74 13.711 1.2909
0.562 5.501 36.43 120 14.9806 1.2346
0.625 5.375 40.09 16.1821 1.1787
0.719 5.187 45.39 160 17.8243 1.0977
0.864 4.897 53.21 XXHY 20.025 .9784
1.000 4.625 60.13 21.7719 .8727
1.125 4.375 66.14 23.1237 .7809
IS 1161 Grade YST 210 Seamless Pipes Tolerance
PERMISSIBLE AXIAL COMPRESSIVE STRESS (YST 310 Grade)
1/r 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ac 186 183 178 169 157 143 128 113 99 87 77 67 60 53
1/r 150 160 170 180 190 200 210 220 230 240 250 300 350
Ac 47 42 38 34 31 28 26 23 22 20 18 13 10

*Source: IS standards

OTHER ALLOWABLE STRESS VALUES (in Mpa)
Steel Grade Minimum Yield stress Minimum UTS Axial Stress in Tension Bending Stress in Ten. Or Compn. Shear Stress Bearing Stress 232 Equivalent Stress
Yst 310 310 450 186 205 140 232 279
Section Type Grade Mechanical Properties Dimensional Tolerance
YST UTS % of Elongation Outside dimension Thickness Squareness Corner radius Weight
Mpa Mpa < 25.4 mm > 25.4 mm Individual lengths On lot of 10 MT
RHS/SHS IS : 1161 YST 210 210 330 12 20 +/-1% with a minimum of +/-0.50 mm +/-10% 90 deg +/-2 deg. 3t max 10%-8% +/-7.5%
YST 240 240 410 10 15
YST 310 310 450 8 10
CHS IS : 1161 YST 210 210 330 12 20 OD upto and incl 48.3+0.4/-0.8mm. Over 48.3 mm +/-1.0% + no limit -10% NA NA L +10%, -8% L +/-5%
YST 240 240 410 12 17 M & H +/-10% M & H +/-7.5%
YST 310 310 450 12 14
*YST 210 and YST 240 are also manufactured *Galvanized sections can also be manufactured
Pressure Chart of IS 1161 YST 355
Maximum Allowable Pressure (psi)
NPS Outside Diameter Schedule
(in) (in) 10 20 30 STD 40 60 XS 80 100 120 140 160 XXS
1/4 0.54 7985 7985 10798 10798
3/8 0.675 6606 6606 9147 9147
1/2 0.84 6358 6358 8575 8575 10908 17150
3/4 1.05 5273 5273 7187 7187 10220 14373
1 1.315 4956 4956 6670 6670 9316 13340
1 1/4 1.66 4133 4133 5638 5638 7380 11276
1 1/2 1.9 3739 3739 5158 5158 7247 10316
2 2.375 3177 3177 4498 4498 7097 8995
2 1/2 2.875 3460 3460 4704 4704 6391 9408
3 3.5 3024 3024 4200 4200 6132 8400
3 1/2 4 2769 2769 3896 3896
4 4.5 2581 2581 3670 3670 4769 5782 7339
5 5.563 2273 2273 3303 3303 4404 5505 6606
6 6.625 2071 2071 3195 3195 4157 5318 6390
8 8.625 1420 1574 1829 1829 2307 2841 2841 3375 4085 4613 5147 4971
10 10.75 1140 1399 1664 1664 2279 2279 2708 3277 3847 4558 5128 4558
12 12.75 961 1268 1441 1560 2160 1922 2644 3244 3843 4324 5042 3843
14 14 875 1092 1313 1313 1533 2079 1750 2625 3283 3829 4375 4921
16 16 766 956 1148 1148 1531 2009 1531 2585 3157 3733 4404 4882
18 18 681 849 1192 1021 1530 2042 1361 2553 3147 3743 4252 4848
20 20 613 919 1225 919 1455 1989 1225 2526 3138 3675 4288 4824
22 22 557 835 1114 835 1949 1114 2506 3063 3619 4176 4733
24 24 510 766 1147 766 1405 1978 1021 2489 3126 3700 4210 4786
30 30 510 817 1021 613 817
32 32 478 766 957 574 1054
34 34 450 721 901 540 992
36 36 425 681 851 510 1021
42 42 583 729 438 875
Get free sample of Large Diameter IS 1161 YST 355 Steel HFS Tube suppliers, IS 1161 Indian Standard Tubes at low cost in India
IS 1161 YST 210 Welded Pipes Price
IS 1161 YST 310 Price Per Piece in India Carbon Steel IS 1161 YST 355 Price in INR High-Alloy Steel IS 1161 Price in UAE Dirham IS 1161 YST 240 Price in Saudi Riyal
Carbon Steel IS 1161 YST 355 Pipe Price in India Rs.58 UAE Dirham 3.00 Saudi Riyal 3.06
IS 1161 YST 240 Pipe Price List Rs.72 UAE Dirham 3.73 Saudi Riyal 3.80
IS 1161 YST 310 Pipe Price in India Rs.50 UAE Dirham 2.59 Saudi Riyal 2.64
High-Alloy Steel IS 1161 Pipe Cost in Mumbai Rs.34 UAE Dirham 1.76 Saudi Riyal 1.79
Price of IS 1161-97 Pipe in Mumbai Rs.40 UAE Dirham 2.07 Saudi Riyal 2.11
MS IS 1161 B Class Pipe Price in India Rs.55 UAE Dirham 2.85 Saudi Riyal 2.90
IS 1161 Steel Tube Sizes
Wall Sizes ( O.D.)
.010 1/16" , 1/8" , 3/16"
.020 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8"
.012 1/8"
.016 1/8" , 3/16"
.028 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2"
.035 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.049 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.065 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3"
.083 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3"
.095 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2"
.109 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
.120 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3"
.125 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4"
.134 1"
.250 3"
.375 3 1/2"
View IS 1161 YST 210 / 310 / 355 Pipes Size Chart
IS 1161 Pipe Sizes
1/8" IPS(.405" O.D.) 3 1/2" IPS( 4.000" O.D.)
SCH 40, 80 SCH 10, 40, 80, 160, XXH
1/4" IPS(.540" O.D.) 4" IPS(4.500" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
3/8" IPS(.675" O.D.) 5" IPS( 5.563" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
1/2" IPS(.840" O.D.) 6" IPS(6.625" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050" O.D.) 8 ” IPS(8.625" O.D.)
SCH 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′ O.D.) 10" IPS(10.750" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660" O.D.) 12" IPS(12.750" O.D.)
SCH 10, 40, 80, 160, XXH SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900" O.D.) 14" IPS(14.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10 (.188), SCH40 (.375)
2" IPS(2.375" O.D.) 16" IPS(16.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875" O.D.) 18" IPS (18.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH-40 (.375)
3" IPS( 3.500" O.D.)
SCH 5, 10, 40, 80, 160, XXH