ISMT ERW Tubes Distributor in India
Table of contents
- ISMT Seamless Pipe Specification
- Size Chart of ISMT Hydrualic Line Pipe
- ISMT Seamless Pipe Applications
- ISMT Welded Pipe Assel and PQF Mill Specifications
- ISMT Steel Pipe Coating
- Types of ISTM Pipes
- Mechanical Properties of ISMT ERW Tubes
- ISMT Seamless Pipe Delivery Condition
- ISTM Casing Pipe Properties
- Chemical Composition of ISMT Hydrualic Line Pipe
- ISMT High Collapse Casing Pipe International Standards
- ISMT Non-Alloyed Structural Steel Pipe Chemical Composition
ISMT Seamless Pipe Specifications
ISMT Line Pipe Sizes
- 1/2″ To 36″ NB
ISMT ERW Tubes Size
- 15.88 to 914.40 mm
ISMT Seamless Pipe Size
- Upto 40mm
ISMT High Collapse Casing Pipe Length
- Custom
- Cut to size
- SRL: 1 - 14 m
ISMT Welded Pipe Schedule
- Schedule 5 - 160
Third Party Inspection Agency of ISMT Line Pipe
- LLOYDS
- SGS
- DNV
- ABS
- TUV
Marking of ISMT ERW Tubes
- Logo
- Manufacturing type
- Specification
- Grade
- Schedule
- Size
ISMT Seamless Pipe Manufacturing types
- HSAW
- SSAW
- LSAW
- DSAW
- SAW
- ERW
- Seamless
Certificates of ISMT Hydrualic Line Pipe
- DFARS compliant
- Invoice
- Third Party Inspection Report
- MTC EN 10204 3.1/ 3.2
- Raw Materials Certificate
ISMT High Collapse Casing Pipe Value added service
- Galvanised Finish
- Heat Marked Pipes
- Fusion Bond Epoxy
- Sand Blasting
- Bending
- Shot Blasting
- Heat treatment
- Cutting
- Anti-Corrosion Oil
- Black Oil Paint
- Machining
- Annealed
ISMT Seamless Pipe Dimensional Standard
- ASTM A53
- ISO 3183
- API 5L
- BS 3601
- JIS G3454
- ASTM A106
- DNVGL-ST-F101
- EN 10208
- ASME B36.10M
- JIS G3455
ISMT Welded Pipe Welding methods
- EFW
- SMAW
- TIG
- GMAW
- MIG
- GTAW
Testing requirements of ISMT Line Pipe
- Hardness test
- Radiographic inspection
- Bend test
- Geometric accuracy
- Tensile test
- Ultrasonic test
- Imapct test
- Hydrotesting
End type of ISMT ERW Tubes
- Threaded
- Plain
- Bevelled
Transportation of ISMT Hydrualic Line Pipe
- By Air
- By Sea
- By Road
ISMT High Collapse Casing Pipe Cutting Facility
- Tapping
- Sawing
- Laser Cutting
- Water Jet Cutting
Protection Caps of ISMT Welded Pipe
- Threaded
- Push-fit
ISMT Line Pipe Equivalent standards
- ASTM A106
- ASTM A53
- ISO 3183
- JIS G3455
- API 5L
- CSA Z245.1
- ASTM A333
- JIS G3454
- EN 10208
Rexal Tubes Is a Exporter Of ISMT Hydrualic Line Pipe Provide Bulk Stock Upto 273 mm OD
Size Chart of ISMT Hydrualic Line Pipe
| OD (mm) | WT (mm) | OD Tol. (mm) | ID (mm) | Weight (kg/m) |
|---|---|---|---|---|
| 6 | 0.75 | + 0.08 | 4.5 | 0.10 |
| 8 | 1 | + 0.08 | 6 | 0.17 |
| 10 | 1 | + 0.08 | 8 | 0.22 |
| 12 | 1 | + 0.08 | 10 | 0.27 |
| 14 | 1 | + 0.08 | 12 | 0.32 |
| 15 | 1 | + 0.08 | 13 | 0.35 |
| 16 | 1 | + 0.08 | 14 | 0.37 |
| 18 | 1 | + 0.08 | 16 | 0.42 |
| 20 | 1.5 | + 0.08 | 17 | 0.68 |
| 22 | 1 | + 0.08 | 20 | 0.52 |
| 25 | 2 | + 0.08 | 21 | 1.13 |
| 28 | 1.5 | + 0.08 | 25 | 0.98 |
| 30 | 2 | + 0.08 | 26 | 1.38 |
| 35 | 2 | + 0.15 | 31 | 1.63 |
| 38 | 2.5 | + 0.15 | 33 | 2.19 |
| 42 | 2.5 | + 0.20 | 37 | 2.44 |
| 50 | 6 | + 0.20 | 38 | 6.51 |
| 70 | 7 | + 0.30 | 56 | 10.88 |
ISMT High Collapse Casing Pipe Used For Deep Oil and Gas Wells To Withstand High External Pressures
ISMT Seamless Pipe Applications
Stocking Distributor of ISMT Welded Pipe With Assel Mills and PQF Mill Combination
ISMT Welded Pipe Assel and PQF Mill Specifications
| Pipe | Mill Type | OD | WT |
|---|---|---|---|
| Welded Pipe | Assel Mill + PQF Mill | 1" to 12" | SCH 40, SCH 160 |
| 2" to 16" | SCH 40, SCH 80 | ||
| 3" to 20" | SCH 40, SCH 80, SCH 160 | ||
| 1-1/2" to 8" | SCH 40, SCH 160 |
Readily Stock Of ISMT Line Pipe in A106, A53 and API 5L Grades With 3LPE Coating
ISMT ERW Tubes
ISMT Seamless Pipe
ISMT Hydrualic Line Pipe
ISMT High Collapse Casing Pipe
ISMT Welded Pipe
ISMT Line Pipe
Mechanical Properties of ISMT ERW Tubes
| Steel Name | Steel No. | Rm MPa | Temperature | R MPa | A % |
|---|---|---|---|---|---|
| St 52.4 | 1581 | 490-630 | 355°C | 21 | - |
| St 44.4 | 1257 | 21 | 420°C | 275 | 490-630 |
| St 37.4 | 1255 | 25 | 420°C | 235 | 420-550 |
| St 52 | 1421 | 21 | 420°C | 275 | 500-650 |
| St 44 | 1256 | 21 | 420°C | 275 | - |
| St 37 | 1254 | 30 | 415°C | 240 | - |
| St 52 | 1580 | 640 | 640°C | 580 | 4 |
| St 45 | 1408 | 580 | 580°C | 520 | 5 |
| St 35 | 1308 | 480 | 480°C | 420 | 10 |
| St 30 | 1212 | 380 | 430°C | 280 | 12 |
ISMT Seamless Pipe Delivery Condition
| Designation | Symbol |
|---|---|
| Cold drawn / hard | +c (BK) |
| Annealed | +A (GBK) |
| Cold drawn / soft | +LC (BKW) |
| Normal | +N (NBK) |
| Cold drawn and stress Delivered | +SR (BKS) |
| OD (in.) | WT (in.) | Weight (kg/m) | Y.S. Range (ksi / MPa) | Pressure (PSI / MPa) | U.T.S min (ksi / MPa) | PPF |
|---|---|---|---|---|---|---|
| 12" | 0.408 | 43 | 140 / 965 | 7295 / 50.31 | 175 / 1207 | 20-23.5 |
| 10" | 0.540" | 35 | 150 / 1034 | 10575 / 72.93 | 200 / 1378 | 14-16.5 |
| 8" | 0.417" | 28 | 140 / 965 | 8331 / 57.45 | 175 / 1207 | 10.5-13 |
| 7" | 0.415" | 20 | 125 / 862 | 11116 / 76.66 | 150 / 1034 | 9.2-12.70 |
| 6-5/8" | 0.362" | 18 | 125 / 862 | 9974 / 68.78 | 172 / 1180 | 6.5-8.6 |
| 6" | 0.253" | 13 | 95 / 655 | 5589 / 38.54 | 110 / 758 | 3.24-4.50 |
| 5" | 0.290" | 13.5 | 95 / 655 | 5409 / 37.31 | 110 / 758 | 2.09-3.03 |
| 4-1/2" | 0.224" | 10.5 | 55 / 379 - 80 / 552 | 5414 / 37.33 | 95 / 655 | 1.14-1.48 |
Chemical Composition of ISMT Hydrualic Line Pipe
| Steel Name | Steel No. |  |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|---|
| St 30 Al | 1212 | 0.10 % max | 05% max | 0.70% max | 025% max | 010% max | 025% min |
| St 35 | 1308 | 0.17% max | 0.35% max | 1.20% max | 025% max | 010% max | 020% min |
| St 45 | 1408 | 0.40% max | 0.21% max | 0.35% max | 025% max | 010% max | 020% min |
| St 52 | 1580 | 0.22% max | 0.55% max | 1.60% max | 025% max | 025% max | 020% min |
| St 37 | 1254 | 0.17% max | 0.35% max | 025% max | 010% max | 020% max | - |
| St 44 | 1256 | 0.21% max | 0.35% max | 025% max | 010% max | 020% max | - |
| St 52 | 1421 | 0.22% max | 0.35% max | 025% max | 010% max | 020% max | 350-480% min |
| St 37.4 | 1255 | 0.17% max | 0.35% max | 025% max | 010% max | 020% max | 350-480% min |
| St 44.4 | 1257 | 0.20% max | 0.35% max | 025% max | 010% max | 020% max | 500-650% min |
| St 52.4 | 1581 | ≤1.6% max | 0.20% max | 0.35% max | 025% max | 010% max | 500-650% min |
ISMT High Collapse Casing Pipe International Standards
| USA | Japan | Europe | UK | Germany | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ASME/ASTM | JIS | EN | BS | DIN | ||||||||||
| - | - | SA/A106 | - | SA/A209 | SA/A213, SA/A335 | SA/A210 | 3461 | 3456 | EN 10216-2 | EN 10216-4 | - | DIN 17173 | DIN 17175 | DIN 17176 |
| SA/A 179 | - | Gr.A | SA/A 192 | - | - | - | - | - | P 235GH | - | - | - | St.35.8 | - |
| - | - | Gr.B | - | - | - | SA/A210Gr.A1 | STPT 38 | 3458 | P 265GH | - | 3059/2-440 | - | St.45.8 | - |
| - | - | - | - | - | - | - | - | - | - | - | 3059/1-360 | - | - | - |
| - | - | Gr.C | - | - | - | SA/A210Gr.C | - | - | - | - | 3059/1-360 | - | 17Mo4 | - |
| - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| - | - | - | - | - | - | - | - | - | 16Mo3 | - | 3059/243 | - | 15Mo3 | - |
| - | - | - | - | - | T5/P5 | - | STBA 25 | STPA 25 | X11CrMo5 | - | 3604/625 | - | - | X12CrMo195 |
| - | - | - | - | T1/T1A | P1 | - | STBA 12 | STPA 12 | 16Mo3 | - | 3606/245 | - | 16Mo3 | - |
| - | - | - | - | - | - | - | - | - | X11CrMo5 | - | 3606/625 | - | - | X12CrMo5 |
| - | - | - | - | - | - | - | - | - | - | - | 3604/629-590 | - | - | - |
| - | - | - | - | - | T9 / P9 | - | STBA 26 | STPA 26 | X11CrMo9-10 | - | 3659-629-590 | - | - | X12CrMo9-1 |
| - | - | - | - | - | T11 / P11 | - | STBA 26 | STPA 23 | 10CrMo5-5 | - | 3604/621 | - | - | X12CrMo9-1 |
| - | - | - | - | - | T12 / P12 | - | STBA 22 | STPA 22 | 12CrMo4-5 | - | 3659/2-620 | - | 13CrMo4-4 | - |
| - | - | - | - | - | - | - | - | - | - | - | 3606 - 621 | - | - | - |
| - | - | - | - | - | - | - | - | - | - | - | 3606 - 620 | - | - | - |
| - | - | - | - | - | - | - | - | - | - | - | 3604 - 622 | - | - | - |
| - | - | - | - | - | T22 / P22 | - | STBA 24 | STPA 24 | 10CrMo9-10 | - | 3059/2-622-490 | - | 10CrMo9-10 | - |
| - | - | - | - | - | T91 / P91 | - | STBA 28 | STPA 28 | X10CrWMoVNb9-1 | - | 3059/2-91 | - | X10CrMoVNb9-1 | - |
| - | - | - | - | - | T23 / P23 | - | - | - | - | - | - | - | - | - |
| - | - | - | - | - | T92 / P92 | - | STBA 29 | STPA 29 | X10CrWMoVNb9-2 | - | - | - | - | - |
| - | - | - | - | - | T36 / P36 | - | - | - | - | - | - | - | - | - |
| - | SA/A 333 Gr6 | - | - | - | - | - | - | - | - | - | 3603:1991-43-LT | - | - | - |
| - | SA/A 333 Gr1 | - | - | - | - | - | - | - | - | P215NL/P255 QL | - | TTSt35N/V | - | - |
ISMT Non-Alloyed Structural Steel Pipe Chemical Composition
| Grade | WT (mm) | |
|
|
|
|
|---|---|---|---|---|---|---|
| S235JRH | ≤ 40 | ≤ 1.40 | ≤ 0.17 | ≤ 0.035 | ≤ 0.009 | ≤ 0.035 |
| S275J0H | ≤ 1.50 | ≤ 0.20 | ≤ 0.035 | ≤ 0.009 | ≤ 0.035 | |
| S275J2H | ≤ 1.50 | ≤ 0.20 | ≤ 0.030 | ≤ 0.009 | ≤ 0.030 | |
| S355J0H | ≤ 0.55 | ≤ 0.22 | ≤ 1.60 | ≤ 0.035 | ≤ 0.035 | |
| S355J2H | ≤ 0.55 | ≤ 0.22 | ≤ 1.60 | ≤ 0.030 | ≤ 0.030 | |
| S355K2H | ≤ 0.55 | ≤ 0.22 | ≤ 1.60 | ≤ 0.030 | ≤ 0.040 |