S235JRH EN 10219 Carbon Steel Seamless Pipes and Tubes
Bs EN 10219 S235jrh Square Tube
EN 10219 S235jrh Material
EN 10219 Pipe comes under the specification for cold formed welded structural hollow sections of circular, square or rectangular forms. There are different grades in this specification such as the EN 10219-2 Pipe and others which do not require heat treatment after formation. The material can be non alloys or fine grain steels. The Bs EN 10219 S235jrh pipes have the steel number of 1.0039 and have carbon, silicon, phosphorus, sulfur and niobium in the composition. The S355j2h Pipe has a steel number of 1.0138 and has 1.5% phosphorus; content higher than the former grades. The lowest phosphorus content is in the S235jrh Material grade. The highest is in the S355K2H material grade. These differences cause the differences in the mechanical properties, corrosion resistance and wear and tear resistance. The EN 10219-1 Seamless Pipe is dimensionally accurate and range up to 152mm in outer diameter. The welded pipes range up to 1219.2mm in outer diameter and the wall thicknesses of both pipes range from 0.5mm to 20mm. The EN 10219 Square Tube can come under schedules sch5 through XXS and heavier. The pipes and tubes are made as round, square, rectangular and hydraulic types depending on the application requirements. The EN 10219 Round Tube is the most commonly used form of this pipe. The pipe specifications allow the customers to select the right pipe for the right application with cost effectiveness. The Tube EN 10219-2 pipes are used in oil and gas, petroleum, petrochemical, food processing, construction and in other engineering applications with structural elements.
Standard No | EN 10219 |
Outside Diameter | 21.3—457.2mm |
Wall Thickness | 1.8—-14.27mm |
Circular Dimension Range | 26.9 – 323.9 mm |
Square Dimension Range | 25×25 – 300×300 mm |
Rectangular Dim Range | 40×20 – 400×200 mm |
Length | 6000 – 12 000/18 000 mm |
Grade | S235JRH |
Bs EN 10219 S235JRH Shs And Chs Steel Pipe
EN 10219 S235JRH Round steel pipe diameter od 445mm
EN 10219 S235JRH 14 inch spiral welded steel pipe
EN 10219 Grade S235JRH Equal Cold Formed 3PE Coating Schedule 40 Steel Pipe
EN 10219 Grade S235JRH ST33 welded steel pipes
BS EN 10219 Grade S235JRH cold formed SHS 120 x 120 x 4mm hollow section tube
EN 10219 Grade S235JRH ST33 welded hollow section pipes
EN 10219 Grade S235JRH Seamless steel pipe
Steel Grade | Type of deoxidation |
% by mass, maximum |
||||||
steel name |
steel number |
C |
SI |
Mn |
P |
S |
Nb |
|
S235JRH |
1.0039 |
FF |
0.17 |
1.4 |
0.04 |
0.04 |
0.009 |
Steel Grade | Minimum Yield Strength MPa |
Tensile Strength MPa |
Elongation |
Impact Energy |
|||
Steel name |
Steel number |
thickness(mm) |
thickness(mm) |
% (min) |
(KV J) (min) |
||
≤ 16 |
16> to ≤40 |
≤3 |
> 3 ≤40 |
≤40 mm |
test temperature |
||
S235JRH |
1.0039 |
235 |
225 |
360-510 |
360-510 |
24 |
20℃ |
Steel grade | Maximum CEV for
nominal thicknesses ≤40mm |
|
Steel name | Steel number | |
S275J0H | 1.0149 | 0,40 |
1/8" IPS(.405" O.D.) | 3 1/2" IPS( 4.000" O.D.) |
---|---|
SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
1/4" IPS(.540" O.D.) | 4" IPS(4.500" O.D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
3/8" IPS(.675" O.D.) | 5" IPS( 5.563" O.D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
1/2" IPS(.840" O.D.) | 6" IPS(6.625" O.D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
3/4" IPS(1.050" O.D.) | 8 ” IPS(8.625" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
1" IPS:(1.315′ O.D.) | 10" IPS(10.750" O.D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
1-1/4" IPS(1.660" O.D.) | 12" IPS(12.750" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
1-1/2" IPS(1.900" O.D.) | 14" IPS(14.000" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
2" IPS(2.375" O.D.) | 16" IPS(16.000" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
2 1/2" IPS(2.875" O.D.) | 18" IPS (18.000" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
3" IPS( 3.500" O.D.) | |
SCH 5, 10, 40, 80, 160, XXH |
Wall | Sizes ( O.D.) |
---|---|
.010 | 1/16" , 1/8" , 3/16" |
.020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
.012 | 1/8" |
.016 | 1/8" , 3/16" |
.028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
.035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
.083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
.095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
.109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
.120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
.125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
.134 | 1" |
.250 | 3" |
.375 | 3 1/2" |
Sizes in mm | kg/m | Sizes in mm | kg/m |
20 x 20 x 2.5 | 1.35 | 20 x 20 x 2.0 | 1.12 |
25 x 25 x 2.0 | 1.43 | 25 x 25 x 1.5 | 1.06 |
25 X 25 X 3.0 | 2.04 | 25 X 25 X 2.5 | 1.74 |
30 X 30 X 2.5 | 2.14 | 30 X 30 X 2.0 | 1.68 |
40 x 40 x 1.5 | 1.81 | 30 X 30 X 3.0 | 2.51 |
40 x 40 x 2.5 | 2.92 | 40 x 40 x 2.0 | 2.31 |
40 x 40 x 4.0 | 4.46 | 40 x 40 x 3.0 | 3.45 |
50 x 50 x 1.5 | 2.28 | 40 x 40 x 5.0 | 5.40 |
50 x 50 x 2.5 | 3.71 | 50 x 50 x 2.0 | 2.93 |
50 x 50 x 4.0 | 5.72 | 50 x 50 x 3.0 | 4.39 |
60 x 60 x 3.0 | 5.34 | 50 x 50 x 5.0 | 6.97 |
60 x 60 x 5.0 | 8.54 | 60 x 60 x 4.0 | 6.97 |
70 x 70 x 3.0 | 6.28 | 60 x 60 x 6.0 | 9.45 |
70 x 70 x 5.0 | 10.11 | 70 x 70 x 3.6 | 7.46 |
70 x 70 x 8 | 15.30 | 70 x 70 x 6.3 | 12.50 |
80 x 80 x 3.0 | 7.22 | 75 x 75 x 3.0 | 7.07 |
80 x 80 x 5.0 | 11.70 | 80 x 80 x 3.6 | 8.59 |
90 x 90 x 3.0 | 8.01 | 80 x 80 x 6.0 | 13.90 |
90 x 90 x 5.0 | 13.30 | 90 x 90 x 3.6 | 9.72 |
90 x 90 x 8.0 | 20.40 | 90 x 90 x 6.0 | 15.76 |
100 x 100 x 4.0 | 12.00 | 100 x 100 x 3.0 | 8.96 |
100 x 100 x 5.0 | 14.80 | 100 x 100 x 5.0 | 14.80 |
100 x 100 x 8.0 | 22.90 | 100 x 100 x 6.0 | 16.19 |
120 x 120 x 5 | 18.00 | 100 x 100 x 10 | 27.90 |
120 X 120 X 6.3 | 22.30 | 120 x 120 x 6.0 | 21.30 |
120 x 120 x 10 | 34.20 | 120 x 120 x 8.0 | 27.90 |
120 X 120 X 12.5 | 41.60 | 120 X 120 X 12 | 35.8 |
140 X 140 X 6.3 | 26.30 | 140 X 140 X 5.0 | 21.10 |
140 X 140 X 10 | 40.40 | 140 X 140 X 8 | 32.90 |
150 X 150 X 5.0 | 22.70 | 140 X 140 X 12.5 | 49.50 |
150 X 150 X 8.0 | 35.40 | 150 X 150 X 6.3 | 28.30 |
150 X 150 X 12.5 | 53.40 | 150 X 150 X 10 | 43.60 |
150 X 150 X 16 | 66.40 | 150 X 150 X 16 | 66.40 |
180 X 180 X 6.3 | 34.20 | 180 X 180 X 5 | 27.40 |
180 X 180 X 10 | 53.00 | 180 X 180 X 8 | 43.00 |
180 X 180 X 16 | 81.40 | 180 X 180 X 12.5 | 65.20 |
200 X 200 X 6 | 35.8 | 200 X 200 X 5 | 30.50 |
200 x 200 x 8 | 48.00 | 200 x 200 x 6.3 | 38.2 |
200 x 200 x 12.5 | 73.00 | 200 x 200 x 10 | 59.30 |
250 x 250 x 6.3 | 48.10 | 200 x 200 x 16 | 91.50 |
250 x 250 x 10 | 75.00 | 250 x 250 x 8 | 60.50 |
250 x 250 x 16 | 117.00 | 250 x 250 x 12.5 | 92.60 |
300 x 300 x 8 | 73.10 | 300 x 300 x 6.3 | 57.90 |
300 x 300 x 8 | 90.70 | 300 x 300 x 10 | 57.90 |
300 x 300 x 16 | 142.00 | 300 x 300 x 12.5 | 112.00 |
350 x 350 x 10 | 106.00 | 350 x 350 x 8 | 85.70 |
350 x 350 x 16 | 167.00 | 350 x 350 x 12.5 | 132.00 |
400 x 400 x 12 | 141.00 | 400 x 400 x 10 | 122.00 |
400 x 400 x 16 | 192 | 400 x 400 x 12.5mm | 152.00 |