Table of contents
- S275J0H Specification
- Chemical Composition of EN 10210 S275J0H Seamless Pipe
- EN 10210-1 Grade S275J0H Pipes Schedule Chart
- Coatings of EN 10210-1 S275J0H Welded Pipe
- S275J0H Third Party Inspection
- Types of EN 10210 S275J0H Square Tube
- Mechanical Properties of EN 10210-1 Gr Welded Pipe
- EN 10210-1 Grade S275J0H CHS Size Chart
- Dimensional Tolerance of EN 10210-1 Grade S275J0H Pipes
- EN 10210 S275J0H Circular Pipe Length Tolerance
- Equivalent Grade of S275J0H
- EN 10210-1 S275J0H Seamless Tubes Weight Chart
- Top 5 Reasons for Suppliers in Amsterdam to Procure S275J0H from Rexal Tubes.
EN 10210-1 Grade 1.0149 Hollow Sections Supplier in India, Check Material Properties
EN 10210 S275J0H Seamless Pipe Sizes
- 20 – 400 mm
EN 10210-1 hot-finished hollow section tube Size
- 0.5 – 25 mm
EN 10210-1 Grade S275J0H Pipes Size
- 1.4 to 9.3 mm
EN 10210-1 S275J0H Welded Pipe Length
- Custom
- Cut to size
- SRL: 6 - 14 m
Hot Finish EN 10210 S275J0H Square Hollow Section Schedule
- Sch 40
Marking of EN 10210-1 Grade S275J0H CHS
- Logo
- Manufacturing type
- Specification
- Grade
- Schedule
- Size
EN 10210-1 Grade S275J0H Pipes Manufacturing types
- HSAW
- SSAW
- LSAW
- DSAW
- SAW
- ERW
- Seamless
EN 10210-1 Grade S275J0H Pipes Coating
- PTFE Lined
- Powder Coated
- Bare Steel
- Galvanized
- 3LPP Coating
- Internal Coating
- Black
- Cement Lined Steel
- Epoxy Coated
- 3LPE Coated
Third Party Inspection Agency of EN 10210-1 Gr Welded Pipe
- LLOYDS
- SGS
- DNV
- ABS
- TUV
Certificates of EN 10210 S275J0H Hot Finish Square Hollow Section
- DFARS compliant
- Invoice
- Third Party Inspection Report
- MTC EN 10204 3.1/ 3.2
- Raw Materials Certificate
Yield strength of EN 10210-1 Structural Hollow Sections
- 250 to 350 MPa
- 36 to 50 ksi
EN 10210 S275J0H Square Tube Welding methods
- EFW
- SMAW
- TIG
- GMAW
- MIG
- GTAW
EN 10210 S275J0H Circular Pipe Value added service
- Heat Marked Pipes
- Fusion Bond Epoxy
- Galvanised Finish
- Bending
- Shot Blasting
- Annealed
- Sand Blasting
- Cutting
- Anti-Corrosion Oil
- Heat treatment
- Machining
- Black Oil Paint
Protection Caps of S275J0H EN 10210 CHS Tube
- Push-fit
- Threaded
Testing requirements of EN 10210-1 S275J0H Seamless Tubes
- Radiographic inspection
- Hardness test
- Bend test
- Tensile test
- Hydrotesting
- Geometric accuracy
- Imapct test
- Ultrasonic test
End type of EN 10210-1 S275J0H Welded Pipe
- Plain
- Threaded
- Bevelled
Transportation of EN 10210 S275J0H Welded Pipe
- By Sea
- By Road
- By Air
En 10210-1 Grade S275J0H Carbon Steel Pipes Cutting Facility
- Tapping
- Water Jet Cutting
- Sawing
- Laser Cutting
Origins of EN 10210-2 S275J0H RHS Tube
- Ukraine
- Indian
- Japanese
- Korean
- Russian
- European
Packaging of DIN 17120 S275J0H Circular Hollow Section
- Wrapped in plastic
- Custom packing
- Crates
- Wooden Boxes
EN 10210-1 S275J0H Rectangular tube Application
- Petrochemical Industry
- Nuclear Power Plant
- Oil and Gas Industry
- Pulp & Paper Industry
- Chemical Industry
Cold Formed S275J0H Steel Welded Pipe Equivalent standards
- ASTM
- SAE
- GB
- ANSI
- JIS
- DIN
- AWWA
- ISO
Production process of EN 10210 S275J0H ERW Pipe
- Cold Rolled
- Hot Rolled
EN 10210-1 S275J0H Structural Hollow Section Brands
- JFE
- Mannesmann
- TATA
- Jindal
- MSL
- ISMT
- Nippon steel
EN 10210 S275J0H - Hot Finish Square Hollow Section With 17 % C and 140 % Mn Content
Chemical Composition of EN 10210 S275J0H Seamless Pipe
| Grade | Chemical Composition (%) | ||||
|---|---|---|---|---|---|
 |
 |
 |
 |
 |
|
| S275J0H | 0.20 max | 1.50 max | 0.035 max | 0.035 max | 0.009 max |
Reliable Manufacturer Of EN 10210-1 S275J0H Welded Pipe in Mumbai, Stock Schedule 10, 20, 40 Upto 160
EN 10210-1 Grade S275J0H Pipes Schedule Chart
| 1/4" IPS | 4" IPS |
|---|---|
| SCH 10 - 80 | SCH 10 - XXH |
| 1/2" IPS | 6" IPS |
| SCH 5 - XXH | SCH 5 - XXH |
| 3/8" IPS | 5" IPS |
| SCH 10 - 80 | SCH 10 - XXH |
| 3/4" IPS | 8" IPS |
| SCH 10 - XXH | SCH 5 - XXH |
| 1-1/4" IPS | 12" IPS |
| SCH 10 - XXH | SCH 10 - 40 - TRUE40 |
| 1" IPS | 10" IPS |
| SCH 40 - 80 | SCH 10 - XXH |
| 1/8" IPS | 3 1/2" IPS |
| SCH 5 - XXH | SCH 10 - 80 - TRUE 80 |
| 1-1/2" IPS | 14" IPS |
| SCH 10 - XXH | SCH10 - SCH40 |
| 2 1/2" IPS | 18" IPS |
| SCH 10 - XXH | SCH-40 |
| 2" IPS | 16" IPS |
| SCH 10 - XXH | SCH10 - SCH40 |
EN 10210 S275J0H Hot Finish Rectangular Hollow Section With Varnish and Oil Coating
Coatings of EN 10210-1 S275J0H Welded Pipe
- Varnish Coating
- Pre-Galvanized Coating
- End Capped
- Black Coated
- Hot Dip Galvanized Coated
- Self Coloured Coated
- Oil Coating
Contact Us For EN 10210 S275J0H CHS Tube Third Party Inspection Like DNV, TUV, LLOYDS, and BVQS
S275J0H Third Party Inspection
Top S275J0H supplier in India, specializing in pipes with exceptional resistance , with country wise delivery time.
Types of EN 10210 S275J0H Square Tube
EN 10210 S235JRH Seamless Pipe
EN 10210-1 Gr Welded Pipe
EN 10210 S235JRH Hot Finish Square Hollow Section
EN 10210 S235JRH Circular Hollow Section Pipe
EN 10210-1 Structural Hollow Sections
EN 10210-1 S235JRH Rectangular tube
EN 10210 S235JRH ERW Pipe
EN 10210-1 S235JRH Structural Square Pipes
Leading S275J0H stockist in Belgium, known for producing high-performance products designed to withstand extreme temperatures, sizes ready in stock.
Mechanical Properties of EN 10210-1 Gr Welded Pipe
| Grade | Impact Energy | Mechanical Properties | ||||
|---|---|---|---|---|---|---|
| Temperature (°C) | Yield Strength | Tensile Strength | Elongation | |||
| - 20 | 0 | 20 | ||||
| S275J0H | – | 27 | – | 275 Mpa | 410 - 560 Mpa | 23 % |
EN 10210-1 Grade S275J0H CHS Size Chart
| Size (mm) | kg/m | Size (mm) | kg/m |
|---|---|---|---|
| 400 x 200 x 8.0 | 73.10 | 300 x 200 x 10.0 | 75.00 |
| 250 x 150 x 10 | 59.3 | 250 x 150 x 8.0 | 48.0 |
| 200 x 100 x 10.0 | 43.60 | 200 x 100 x 8.0 | 35.4 |
| 160 x 80 x 8.0 | 27.90 | 160 x 80 x 6.0 | 21.30 |
| 150 x 100 x 8.0 | 29.10 | 150 x 100 x 6.0 | 22.30 |
| 120 x 80 x 6.0 | 17.60 | 120 x 80 x 5.0 | 14.80 |
| 120 x 80 x 2.5 | 7.65 | 100 x 60 x 5.0 | 11.70 |
| 100 x 50 x 5.0 | 10.90 | 100 x 50 x 4.0 | 8.86 |
| 90 x 50 x 5.0 | 10.11 | 90 x 50 x 3.6 | 7.46 |
| 80 x 50 x 3.0 | 5.66 | 80 x 40 x 5.0 | 8.54 |
| 80 x 40 x 2.5 | 4.26 | 70 x 50 x 4.0 | 6.71 |
| 70 x 50 x 2 | 3.56 | 60 x 40 x 4.0 | 5.72 |
| 60 x 40 x 2.0 | 2.93 | 50 x 40 x 3.0 | 3.77 |
| 50 x 30 x 2.5 | 2.92 | 50 x 25 x 3.0 | 3.22 |
| 40 x 25 x 2.5 | 2.23 | 40 x 25 x 2.0 | 1.89 |
| 40 x 20 x 2.5 | 2.03 | 40 x 20 x 2.0 | 1.68 |
Reputable S275J0H Manufacturer in India, known for crafting heat-resistant material that deliver outstanding performance in extreme temperatures, Readily stock in standard sizes 1/2 - 2.
Dimensional Tolerance of EN 10210-1 Grade S275J0H Pipes
| Size | WT Tolerance | OD Tolerance | |
|---|---|---|---|
| Hot - rolled Tube | OD – 80 OD > 80 WT < 12 WT - 12 mm | ± 0.7 mm | ± 0.4 mm |
| Hot - rolled peeled tube | All sizes WT < 12 mmWT - 12 mm | ± 0.8 mm | + 0.25/ - 0 mm |
| Cold Worked tube | OD < 40 OD 40 - 80 OD > 80 WT< 6 | ± 0.30 mm | + 0.30/ - 0 mm |
Leading S275J0H exporter in Germany, supplying products in a wide range of sizes, if out of stock, can be manufactured within 4 - 5 days.
EN 10210 S275J0H Circular Pipe Length Tolerance
| Length (mm) | OD (100 - 254 mm) | OD (30 - 100 mm) |
|---|---|---|
| 1200 - 5000 | + 6.0/ - 0 | + 5.0/ - 0 |
| 600 - 1200 | + 4.0/ - 0 | + 3.0/ - 0 |
| 100 - 600 | + 3.0/ - 0 | + 2.0/ - 0 |
| 10 - 100 | + 2.0/ - 0 | + 1.0/ - 0 |
Leading S275J0H distributer in Netherlands, offering pipes with superior resistance to corrosion, with Schedule 10 - 160.
| EN |
|---|
| EN 10210-1 Grade S275JOH |
EN 10210-1 S275J0H Seamless Tubes Weight Chart
| NB | WT | OD | Weight |
|---|---|---|---|
| mm | mm | mm | kg/m |
| 300 | 6.30 | 323.9 | 49.36 |
| 8.00 | 62.35 | ||
| 10.00 | 77.44 | ||
| 200 | 4.80 | 219.1 | 25.38 |
| 6.00 | 31.51 | ||
| 8.00 | 41.67 | ||
| 10.00 | 51.59 | ||
| 150 | 4.50 | 165.1 | 17.80 |
| 4.80 | 18.90 | ||
| 5.40 | 21.30 | ||
| 100 | 3.60 | 114.3 | 9.75 |
| 4.50 | 12.20 | ||
| 5.40 | 14.50 | ||
| 80 | 3.20 | 88.9 | 6.72 |
| 4.00 | 8.36 | ||
| 4.80 | 9.90 | ||
| 50 | 2.90 | 60.3 | 4.08 |
| 3.60 | 5.03 | ||
| 5.00 | 6.19 | ||
| 40 | 2.90 | 48.3 | 3.23 |
| 3.20 | 3.56 | ||
| 4.00 | 4.37 | ||
| 30 | 2.60 | 42.4 | 2.54 |
| 3.20 | 3.01 | ||
| 4.00 | 3.79 | ||
| 20 | 2.30 | 26.9 | 1.38 |
| 2.60 | 1.56 | ||
| 3.20 | 1.87 |
Top 5 Reasons for Suppliers in Amsterdam to Procure S275J0H from Rexal Tubes.
- Customer Support
- Good Relationship with clients
- Third party inspection documentation
- Reasonable Price
- Wide Range of Availability