Schedule 10 Carbon Steel Pipe

  • Home
  • Products
  • Schedule 10 Carbon Steel Pipe
Schedule 10 Steel Pipe

Schedule 10 Steel Pipe

Sch 10 Pipe

Sch 10 Pipe

Sch 10 Seamless Pipe

Sch 10 Seamless Pipe

Check dimensions and wall thickness of ANSI B36.10m SCH 10 galvanized pipe and tube

Manufacturer of Sch 10 Cs Pipe & Schedule 10 Mild Steel Pipes in India

Schedule 10 Stainless Steel Pipe Pressure Rating is based on the nominal bore size or the outer diameter of the pipes. There are different pipe sizes in steel pipe grades. Each pipe has a wall thickness and a diameter. The relationship between the diameter and the wall thickness determines the pressure capacity of the schedule 10 pipe. The Schedule 10 Pvc Pipe is a low pressure capacity pipe. The polyvinyl chloride pipes are used with low strength and high corrosive applications. The Sch 10 Cs Pipe is used with low alloy pipes where ductility is necessary with corrosion resistance and wear and tear resistance is needed. The Schedule 10 Carbon Steel Pipe is used with high toughness in oil and gas applications to transport petroleum fluids for longer distances. The SS 304 Sch 10 Pipe is one of the most commonly used types of stainless steel. It is an austenitic stainless steel that has mild corrosion resistance and good strength against general corrosive services. The Schedule 10 Galvanized Steel Pipe is used for extra corrosion resistance. The galvanizing and other coating techniques are used to improve the performance and lifespan of the pipes. The Schedule 10 Mild Steel Pipe is a carbon steel pipe that has good ductility and toughness. The balance of the ductility and toughness of the pipes permit them for wide usage. The Sch 10 316 SS Pipe is a chloride ion resistant austenitic stainless steel pipe that is used in marine and food grade applications.

Schedule 10 Ss Pipe Weight and Dimension

Check schedule 10 pipe dimensions

Nominal size [inches] Outside diameter [inches] Outside diameter [mm] Wall thickness [inches] Wall thickness [mm] Weight [lb/ft] Weight [kg/m]
1/8" NPS6 0.41 10.3 0.049 1.24 0.19 0.28
1/4" NPS8 0.54 13.7 0.065 1.65 0.33 0.49
3/8" NPS10 0.68 17.1 0.065 1.65 0.42 0.63
1/2" NPS15 0.84 21.3 0.083 2.11 0.67 1.0
3/4" NPS20 1.05 26.7 0.083 2.11 0.86 1.28
1" NPS25 1.32 33.4 0.109 2.77 1.4 2.09
1 1/4" NPS32 1.66 42.2 0.109 2.77 1.81 2.7
1 1/2" NPS40 1.9 48.3 0.109 2.77 2.09 3.11
2" NPS50 2.375 60.3 0.109 2.77 2.64 3.93
2 1/2" NPS65 2.875 73.0 0.12 3.05 3.53 5.26
3" NPS80 3.5 88.9 0.12 3.05 4.33 6.45
3 1/2" NPS90 4.0 101.6 0.12 3.05 4.97 7.4
4" NPS100 4.5 114.3 0.12 3.05 5.61 8.36
5" NPS125 5.563 141.3 0.134 3.4 7.77 11.57
6" NPS150 6.625 168.3 0.134 3.4 9.29 13.84
8" NPS200 8.625 219.1 0.148 3.76 13.4 19.96
10" NPS250 10.75 273.0 0.165 4.19 18.65 27.78
12" NPS300 12.75 323.8 0.18 4.57 24.17 36.0
14" NPS350 14.0 355.6 0.25 6.35 36.71 54.69
16" NPS400 16.0 406.4 0.25 6.35 42.05 62.64
18" NPS450 18.0 457.0 0.25 6.35 47.39 70.57
20" NPS500 20.0 508.0 0.25 6.35 52.73 78.55
22" NPS550 22.0 559.0 0.25 6.35 58.07 86.54
24" NPS600 24.0 610.0 0.25 6.35 63.41 94.53
26" NPS650 26.0 660.0 0.312 7.92 85.6 127.36
28" NPS700 28.0 711.0 0.312 7.92 92.26 137.32
30" NPS750 30.0 762.0 0.312 7.92 98.93 147.28
32" NPS800 32.0 813.0 0.312 7.92 105.59 157.24
34" NPS850 34.0 864.0 0.312 7.92 112.25 167.2
36" NPS900 36.0 914.0 0.312 7.92 118.92 176.96

Leading Supplier of Schedule 10 Galvanized Steel Pipe in India, Ready Stock of Schedule 10S pipes

Different Types of Schedule 10 Galvanized Pipe
1-1/2 Schedule 10 Welded Pipe  - 1'-0

1-1/2" Schedule 10 Welded Pipes- 1'-0"

2-1/2 Schedule 10 Pipe, - 2' Length

2-1/2" Schedule 10 Pipes, 2' Length

3.5 Schedule 10 Carbon Steel Pipe

3.5" Schedule 10 Carbon Steel Pipes

SS Seamless Pipe Schedule 10, Size (inch): 1

SS Seamless Pipes Schedule 10, Size (inch): 1

Schedule 10 Pipe Schedule 10 Steel Pipe

Schedule 10 Steel Pipes

1.5 inch 10 inch galvanized schedule 10 seamless steel pipe

1.5 inch 10 inch galvanized schedule 10 seamless steel Pipes

ASTM A53 A36 schedule 10 carbon steel pipe

ASTM A53 A36 schedule 10 carbon steel Pipes

Hot dipped galvanized Weld Carbon SCH10 steel Pipe tube

Hot dipped galvanized Weld Carbon SCH10 steel Pipes tube

Schedule 10 Mild Steel Pipe Chart
Designation of Diameter O/D Nominal Wall Thickness
DIA SCH.5S SCH.5 SCH 10S SCH.10 SCH.40S SCH.40
(A) (B) Meter
MM
Wall
Thk
Weight Kg/Mtr Wall
Thk
Weight Kg/Mtr Wall
Thk
Weight Kg/Mtr Wall
Thk
Weight Kg/Mtr Wall
Thk
Weight Kg/Mtr Wall
Thk
Weight Kg/Mtr
6 1/8 10.3 1 0.23 1.2 0.27 1.73 0.37
8 1/4 13.7 1.2 0.37 1.65 0.49 2.24 0.64
10 3/8 17.2 1.2 0.47 1.65 0.63 2.31 0.87
15 1/2 21.3 1.65 0.01 1.65 0.81 2.11 1.02 2.11 1.02 2.77 1.29
20 3/4 26.7 1.65 1.03 1.65 1.03 2.11 1.3 2.11 1.3 2.87 1.71
25 1 33.4 1.65 1.31 1.65 1.31 2.77 2.13 2.77 2.13 3.38 2.54
32 11/4 24.2 1.65 1.67 1.65 1.67 2.77 2.73 2.77 2.73 3.56 3.44
40 11/2 48.3 1.65 1.93 1.65 1.93 2.77 3.16 2.77 3.16 3.68 4.11
50 2 60.3 1.65 1.93 1.65 2.42 2.77 3.99 2.77 3.99 3.91 5.52
65 21/2 73 2.11 3.75 2.11 3.75 3.05 5.34 3.05 5.34 5.16 8.77
80 3 88.9 2.11 4.59 2.11 4.59 3.05 6.56 3.05 6.56 5.49 11.47
90 31/2 101.6 2.11 5.25 2.11 5.25 3.05 7.53 3.05 7.53 5.74 13.78
100 4 114.3 2.11 5.93 2.11 5.93 3.05 8.5 3.05 8.5 6.02 6.32
125 5 141.3 2.77 9.61 2.77 9.61 3.4 11.74 3.43 11.74 6.55 2210
150 6 168.3 2.77 11.47 2.77 11.47 3.4 14.04 3.43 14.04 7.11 28.69
200 8 219.1 2.77 15 2.77 15 3.76 20.77 3.76 20.27 8.18 43.2
250 10 273.1 3.4 22.95 3.4 22.95 4.19 28.2 4.19 28.2 9.27 61.22
300 12 323.9 3.96 31.72 4.19 33.6 4.57 36.54 4.57 36.54 9.53 75.01 10.31 80.94
350 14 355.6 3.96 34.86 4.78 41.99 6.35 55.53 9.53 82.58 11.13 96
400 16 406.4 4.19 42.2 4.78 48.07 6.35 63.61 9.53 94.7 12.7 125.2
450 18 457.2 4.19 47.46 4.78 54.15 6.35 71.69 9.53 106.83 14.27 158.27
500 2C 508 4.78 60.23 5.54 69.7 6.35 79.76 9.53 118.9 15.06 185.89
550 22 558.8 4.78 65.95 5.54 76.75 6.35 87.84 9.53 131.07 15.88 216.04
600 24 609.6 5.54 83.8 6.35 95.92 6.35 95.92 9.53 143.2 17.45 258.74
650 26 660.4 7.92 129.4 9.53 155.32
700 28 711.2 7.92 139.47 9.53 167.44
750 3C 762 6.35 120.15 7.92 149.55 7.92 149.55 9.53 179.56
800 32 812.8 7.92 159.62 9.53 191.69 17.48 348.11
850 34 863.6 7.92 169.64 9.53 203.74 17.48 370.22
900 36 914.4 7.92 179.77 9.53 215.93 19.05 427.09
Designation of Diameter O/D Nominal Wall Thickness
DIA SCH 80 S SCH 80 SCH 100 SCH 120 SCH. 140 SCH.160 SCH.XXS
(A) (B) Meter
MM
Wall
Thk
Weight Kg/Mtr Wall
Thk
Weight Kg/Mtr Wall
Thk
Weight Kg/Mtr Wall
Thk
Weight Kg/Mtr Wall
Thk
Weight Kg/Mtr Wall
Thk
Weight Kg/Mtr Wall
Thk
Weight Kg/Mtr
6 1/8 10.3 2.41 0.47
8 1/4 13.7 3.02 0.82
10 3/8 17.2 3.2 1.12
15 1/2 21.3 3.73 1.64 4.75 1.97 7.47 2.59
20 3/4 26.7 3.91 2.93 5.54 2.93 7.82 3.69
25 1 33.4 4.55 3.29 6.35 4.3 9.09 5.53
32 11/4 24.2 4.85 4.53 6.35 5.69 9.7 7.88
40 11/2 48.3 5.08 5.49 7.14 7.35 10.16 9.69
50 2 60.3 5.54 7.6 8.71 11.26 11.07 13.65
65 21/2 73 7.01 11.59 9.53 15.15 14.02 20.72
80 3 88.9 7.62 15.51 11.13 21.67 15.24 28.11
90 31/2 101.6 8.08 18.92 16.15 34.56
100 4 114.3 8.56 22.66 11.13 28.75 13.49 34.05 17.12 41.66
125 5 141.3 9.53 31.44 12.7 40.9 15.88 49.87 19.05 58.31
150 6 168.3 10.97 43.21 14.27 55.03 18.24 68.53 21.95 79.1
200 8 219.1 12.7 65.63 15.06 76.93 18.24 91.73 20.62 102.47 23.01 112.97 22.23 108
250 10 273.1 12.7 82.8 15.06 97.27 18.24 116.38 21.41 134.9 25.4 157.51 28.58 174.95 25.4 155.5
300 12 323.9 12.7 98.95 17.45 133.88 21.41 162.14 25.4 189.82 28.58 211.31 33.32 242.4 25.4 189.82
350 14 355.6 12.7 109.04 19.05 160.54 23.8 197.74 27.76 227.88 31.75 257.47 35.71 286.04
400 16 406.4 12.7 125.2 21.41 206.4 26.19 249.34 30.94 290.88 36.53 338.32 40.46 370.74
450 18 457.2 12.7 141.35 23.8 258.29 29.36 314.54 34.93 369.34 39.67 414.74 45.24 466.67
500 2C 508 12.7 157.51 26.19 315.97 32.54 387.41 38.1 448.3 44.45 515.94 49.99 573.31
550 22 558.8 12.7 173.66 28.57 379.7 34.92 457.83 41.27 535.17 47.62 609.3 53.97 682.57
600 24 609.6 12.7 189.82 30.94 448.3 38.89 555.76 46.02 649.44 52.37 730.72 59.51 819.7
650 26 660.4 12.7 205.97 (24.66D-t) t

1000

Wt/pam + formula

Weight Steel Pipe

OD (mm) - W.T. (mm) XW.T. (mm) X 0.02466 = Kg. per mtr.
700 28 711.2 12.7 222.13
750 3C 762 1270 238.28
800 32 812.8 12.7 254.44
850 34 863.6 12.7 270.5
900 36 914.4 12.7 286.75
Schedule 10 Carbon Steel Pipe Pressure Rating
schedule 10 pipe pressure rating
Nominal Size
(inches)
Schedule Number Outside Diameter
(inches)
(mm)
Wall Thickness
(inches)
(mm)
Inside Diameter
(inches)
(mm)
Bursting Internal Pressure
(psi)

(kpa)
Collapsing External Pressure
(psi)

(kpa)
1/8 10 0.405 0.049 0.307 18150 7468
40 0.405 0.068 0.269 25195 10761
80 0.405 0.095 0.215 35185 15441
1/4 10 0.540 0.065 0.410 18055 7425
40 0.540 0.088 0.364 24444 10415
80 0.540 0.119 0.302 33055 14445
3/8 10 0.678 0.065 0.545 14380 5705
40 0.678 0.091 0.493 20132 8397
80 0.678 0.126 0.423 27876 12021
1/2 5 0.840 0.065 0.710 11607 4407
10 0.840 0.083 0.674 14821 5911
40 0.840 0.109 0.622 19464 8084
80 0.840 0.147 0.546 26250 11260
3/4 5 1.050 0.065 0.920 9285 3295
10 1.050 0.083 0.884 11857 4524
40 1.050 0.113 0.824 16142 6529
80 1.050 0.154 0.742 22000 9271
1 5 1.315 0.065 1.185 7414 2445
10 1.315 0.109 1.097 12433 3795
40 1.315 0.133 1.049 15171 6075
80 1.315 0.179 0.957 20418 8530
1 1/4 5 1.660 0.065 1.530 5873 1725
10 1.660 0.109 1.442 9849 3585
40 1.660 0.140 1.380 12650 3895
80 1.660 0.191 1.278 17259 7052
1 1/2 5 1.900 0.065 1.770 5131 1376
10 1.900 0.109 1.682 8605 3002
40 1.900 0.145 1.610 11447 4332
80 1.900 0.200 1.500 15789 6364
2 5 2.375 0.065 2.245 4105 896
10 2.375 0.109 2.157 6884 2196
40 2.375 0.154 2.067 9726 3526
80 2.375 0.218 1.939 13768 5418
2 1/2 5 2.875 0.083 2.709 4330 1001
10 2.875 0.120 2.635 6260 1905
40 2.875 0.203 2.469 10591 3931
3 5 3.500 0.083 3.334 3557 639
10 3.500 0.120 3.260 5142 1375
40 3.500 0.216 3.068 9257 3307
3 1/2 5 4.000 0.083 3.834 3112 431
10 4.000 0.120 3.760 4500 1081
4 5 4.500 0.083 4.334 2766 315
10 4.500 0.120 4.260 4000 845
40 4.500 0.237 4.026 7900 2672
5 5 5.563 0.109 5.345 2949 350
10 5.563 0.134 5.295 3613 665
6 5 6.625 0.109 6.407 2467 129
10 6.625 0.134 6.357 3033 394
SCH 10S Seamless Pipe & Schedule 10 Welded Pipes Weight Chart and Sizes
Sch 10 Pipe Sizes
O.D., I.D., & schedule 10 pipe thickness in mm For Given Sizes
Pipes Size Schedule 10 Thickness
O.D.

I.D.

Wall Thickness
3/4 1.050 0.884 0.083
1 1.315 1.097 0.109
1-1/4 1.660 1.442 0.109
1-1/2 1.900 1.682 0.109
2 2.375 2.157 0.109
2-1/2 2.875 2.635 0.120
3 3.500 3.260 0.120
3-1/2 4.000 3.760 0.120
4 4.500 4.260 0.120
6 6.625 6.357 0.134
8 8.625 8.329 0.148
Schedule 10 Pipe Vs Schedule 40

Pipes Schedule 40 have a greater wall thickness than Pipes Schedule 10, this feature makes it resistant to high pressure. Its has a thickness ranging from 2.7 to 3,91 inches with pipes diameters ranging from 21.3 millimeters ( ½”) to 60.33 millimeters (2”). Suitable for pressures up to 354 bar (small sizes) from 116 bar (large sizes).

Gi Pipe Schedule 10 Application

The sch 10 pipe is used in water lines, commercial, domestic and industrial applications such as pulp and paper, sea water desalination, oil and gas, petroleum and heat exchanger applications.

View Price list of Sch 10 304/ 316 Mild Steel Pipe
Schedule 10 Pipe Price
Sizes Schedule Chart Grade Price List
2'', 1.50'', 1'' Schedule 10 ASTM A106 Grade B Pipe ₹ 60/ Kg
0.06 - 40 mm Sch 10 ASTM A53 Grade B Pipes ₹7,550.82 - ₹1,51,016.40 / Ton

1" - 8"

Schedule 10 ASTM A333 Grade 6 Pipes ₹37,754.10-₹75,508.20/ Ton
1.24 - 59.54 mm Sch 10 P22 Pipes ₹3,624.40-₹3,775.41/ Piece
1 Meter Schedule 10 ASTM A335 P11 Pipes ₹377.55-₹755.09/ Meter
8 - 120 mm Sch 10 API 5L Grade B Pipes ₹22,652.46 - ₹41,529.51 / Ton
14 Inch Schedule 10 API 5L X65 Pipes ₹36,923.51-₹49,080.33/ Ton
4" Sch 10 API 5L X42 Pipe ₹376.04-₹392.65/ Kilogram
What Is Schedule 10 Pipe Used For?

Schedule 10 pipe is commonly available in galvanized steel and mild steel. Schedule 10 iron pipe is a thin-wall pipe. Its use is for low pressure and low corrosion applications. Even with low corrosion activity, a schedule 10 iron pipe will deteriorate quicker than a higher schedule pipe.